Winkelmann, H., Pöllinger, A., Bernardi, J., Whitmore, K., Schwarz, S., Krenn, S., Seichter, S., & Schöbel, M. (2024). Wear mechanisms and material deposition of high-performance polymer composites for hydrogen compression. Engineering Failure Analysis, 164, Article 108712. https://doi.org/10.1016/j.engfailanal.2024.108712

Shakibi Nia, N., Griesser, C., Mairegger, T., Wernig, E.-M., Bernardi, J., Portenkirchner, E., Penner, S., & Kunze-Liebhäuser, J. (2024). Titanium Oxycarbide as Platinum-Free Electrocatalyst for Ethanol Oxidation. ACS Catalysis, 14, 324–329. https://doi.org/10.1021/acscatal.3c04097

Hofmann, C., Sonderegger, J., Hofer, B., Mühlen Axelsson, K., Sommer, D., Whitmore, K., Bernardi, J., Jembrih-Simbürger, D., Cappa, F., & Aceto, M. (2024). The Black Hours: Material and Conservation Study, Part 1. Journal of Paper Conservation. https://doi.org/10.1080/18680860.2024.2420274

Pöllinger, A., Koch, T., Krenn, S., Wilde, F., Tolnai, D., Plank, B., Heupl, S., Bernardi, J., Whitmore, K., Langela, M., Seichter, S., & Schöbel, M. (2023). Thermo-mechanical properties and internal architecture of PI composites for high-pressure hydrogen applications. Polymer, 289, 126500. https://doi.org/10.1016/j.polymer.2023.126500

Grützmacher, P. G., Cutini, M., Marquis, E., Rodríguez Ripoll, M., Riedl, H., Kutrowatz, P., Bug, S., Hsu, C.-J., Bernardi, J., Gachot, C., Erdemir, A., & Righi, M. C. (2023). Se Nanopowder Conversion into Lubricious 2D Selenide Layers by Tribochemical Reactions. Advanced Materials, 35(42), Article 2302076. https://doi.org/10.1002/adma.202302076

Grützmacher, P., Cutini, M., Marquis, E., Rodríguez Ripoll, M., Riedl, H., Kutrowatz, P., Bug, S., Hsu, C.-J., Bernardi, J., Gachot, C., Erdemir, A., & Righi, M. (2023). Se Nanopowder Conversion into Lubricious 2D Selenide Layers by Tribochemical Reactions (Adv. Mater. 42/2023). Advanced Materials, 35(42), Article 2370300. https://doi.org/10.1002/adma.202370300

Thurner, C. W., Drexler, X., Haug, L., Winkler, D., Kunze-Liebhäuser, J., Bernardi, J., Klötzer, B., & Penner, S. (2023). When copper is not enough: Advantages and drawbacks of using copper in de-NOx reactions over lanthanum manganite perovskite structures. Applied Catalysis B: Environmental, 331, Article 122693. https://doi.org/10.1016/j.apcatb.2023.122693

Pfeiffer, S., Baumgartner, T., Löffler, S., Stöger-Pollach, M., Hopkins, S. C., Ballarino, A., Eisterer, M., & Bernardi, J. (2023). Analysis of inhomogeneities in Nb₃Sn wires by combined SEM and SHPM and their impact on Jc and Tc. Superconductor Science and Technology, 36(4), Article 045008. https://doi.org/10.1088/1361-6668/acb857

Gazil, O., Bernardi, J., Lassus Arthur, Virgilio, N., & Unterlass, M. M. (2023). Urethane functions can reduce metal salts under hydrothermal conditions: synthesis of noble metal nanoparticles on flexible sponges applied in semi-automated organic reduction. Journal of Materials Chemistry A: Materials for Energy and Sustainability. https://doi.org/10.1039/D2TA09405C

Hauser, D., Griesser, C., Wernig, E.-M., Götsch, T., Bernardi, J., Kunze-Liebhäuser, J., & Penner, S. (2022). The pervasive presence of oxygen in ZrC. Surfaces and Interfaces, 34, Article 102373. https://doi.org/10.1016/j.surfin.2022.102373

Zeininger, J., Raab, M., Suchorski, Y., Buhr, S., Stöger-Pollach, M., Bernardi, J., & Rupprechter, G. (2022). Reaction Modes on a Single Catalytic Particle: Nanoscale Imaging and Micro-Kinetic Modeling. ACS Catalysis, 12, 12774–12785. https://doi.org/10.1021/acscatal.2c02901

Bakali, E., Artner, W., Beiser, M., Bernardi, J., Detz, H., Eguchi, G., Foelske, A., Giparakis, M., Herzig, C., Limbeck, A., Nguyen, D. H., Prochaska, L., Prokofiev, A., Sauer, M., Schwarz, S., Schrenk, W., Strasser, G., Svagera, R., Taupin, M., … Bühler-Paschen, S. (2022). A Knudsen cell approach for the molecular beam epitaxy of the heavy fermion compound YbRh2Si2. Journal of Crystal Growth, 595, Article 126804. https://doi.org/10.1016/j.jcrysgro.2022.126804

Grützmacher, P., Schranz, M., Hsu, C.-J., Bernardi, J., Steiger-Thirsfeld, A., Hensgen, L., Rodríguez Ripoll, M., & Gachot, C. (2022). Solid lubricity of WS₂ and Bi₂S₃ coatings deposited by plasma spraying and air spraying. Surface and Coatings Technology, 446, Article 128772. https://doi.org/10.1016/j.surfcoat.2022.128772

Mohammadi, A., Praty, C., Farzi, A., Soleimanzadeh, H., Schwarz, S., Stöger-Pollach, M., Bernardi, J., Penner, S., & Niaei, A. (2022). Influence of CeO₂ and WO₃ Addition to Impregnated V₂O₅/TiO₂ Catalysts on the Selective Catalytic Reduction of NOₓ with NH₃. Catalysis Letters. https://doi.org/10.1007/s10562-022-04108-x

Kalantari, N., Bekheet, M., Delir Kheyrollahi Nezhad, P., Back, J., Farzi, A., Penner, S., Delibaş, N., Schwarz, S., Bernardi, J., Salari, D., & Niaei, A. (2022). Effect of chromium and boron incorporation methods on structural and catalytic properties of hierarchical ZSM-5 in the methanol-to-propylene process. Journal of Industrial and Engineering Chemistry, 111(2022), 168–182. https://doi.org/10.1016/j.jiec.2022.03.049

Mohammadi, A., Praty, C., Farzi, A., Soleimanzadeh, H., Schwarz, S., Stöger-Pollach, M., Bernardi, J., Penner, S., & Niaei, A. (2022). Influence of CeO₂ and WO₃ Addition to Impregnated V₂O₅/ TiO₂ Catalysts on the Selective Catalytic Reduction of NOₓ with NH₃. Catalysis Letters. https://doi.org/10.1007/s10562-022-04108-x

Thurner, C. W., Bonmassar, N., Winkler, D., Haug, L., Ploner, K., Delir Kheyrollahi Nezhad, P., Drexler, X., Mohammadi, A., van Aken, P. A., Kunze-Liebhäuser, J., Niaei, A., Bernardi, J., Klötzer, B., & Penner, S. (2022). Who Does the Job? How Copper Can Replace Noble Metals in Sustainable Catalysis by the Formation of Copper-Mixed Oxide Interfaces. ACS Catalysis, 12(13), 7696–7708. https://doi.org/10.1021/acscatal.2c01584

Mohammadi, A., Farzi, A., Thurner, C., Klötzer, B., Schwarz, S., Bernardi, J., Niaei, A., & Penner, S. (2022). Tailoring the metal-perovskite interface for promotional steering of the catalytic NO reduction by CO in the presence of H₂O on Pd-Lanthanum iron manganite composites. Applied Catalysis B: Environmental, 307, Article 121160. https://doi.org/10.34726/3981

Batool, S., Nandan, S. P., Nagaraju Myakala, S., Rajagopal, A., Schubert, J. S., Ayala Leiva, P. R. A., Naghdi, S., Saito, H., Bernardi, J., Streb, C., Cherevan, A. S., & Eder, D. (2022). Surface Anchoring and Active Sites of [Mo3S13]2– Clusters as Co-Catalysts for Photocatalytic Hydrogen Evolution. ACS Catalysis, 12(11), 6641–6650. https://doi.org/10.1021/acscatal.2c00972

Holleis, S., Anna Thomas, A., Shipulin, I. A., Hühne, R., Steiger-Thirsfeld, A., Bernardi, J., & Eisterer, M. (2022). Magnetic granularity in PLD-grown Fe(Se,Te) films on simple RABiTS templates. Superconductor Science and Technology, 35(7), 074001. https://doi.org/10.1088/1361-6668/ac6cab

Delir Kheyrollahi Nezhad, P., Bekheet, M., Bonmassar, N., Gili, A., Kamutzki, F., Gurlo, A., Doran, A., Schwarz, S., Bernardi, J., Praetz, S., Niaei, A., Farzi, A., & Penner, S. (2022). Elucidating the role of earth alkaline doping in perovskite-based methane dry reforming catalysts. Catalysis Science & Technology, 12(4), 1229–1244. https://doi.org/10.1039/d1cy02044g

Holleis, S., Shipulin, I. A., Hühne, R., Bernardi, J., & Eisterer, M. (2022). Reduced granularity in BHO-doped YBCO films on RABiTS templates. Superconductor Science and Technology, 35(10), 104001. https://doi.org/10.1088/1361-6668/ac883c

Kirschner, J., Mayr-Schmölzer, W., Bernardi, J., Gaschl, R., Schwarz, S., Simson, C., Vonbun-Feldbauer, G. B., & Eisenmenger-Sittner, C. (2022). Characterization of an Al-Cu-Mg-Zn multi principal element alloy by experimental and computational screening methods. Acta Materialia, 224(117510), 117510. https://doi.org/10.1016/j.actamat.2021.117510

Nedelkovski, V., Andriotis, O. G., Wieland, K., Gasser, C., Steiger-Thirsfeld, A., Bernardi, J., Lendl, B., Pretterklieber, M. L., & Thurner, P. J. (2022). Microbeam bending of hydrated human cortical bone lamellae from the central region of the body of femur shows viscoelastic behaviour. Journal of the Mechanical Behavior of Biomedical Materials, 125, 104815. https://doi.org/10.1016/j.jmbbm.2021.104815

Riedl, C., Siebenhofer, M., Nenning, A., Friedbacher, G., Weiss, M., Rameshan, C., Bernardi, J., Limbeck, A., Kubicek, M., Opitz, A. K., & Fleig, J. (2022). Performance modulation through selective, homogenous surface doping of lanthanum strontium ferrite electrodes revealed by in situ PLD impedance measurements. Journal of Materials Chemistry A, 10(6), 2973–2986. https://doi.org/10.1039/d1ta08634k

Zampa, A., Holleis, S., Badel, A., Tixador, P., Bernardi, J., & Eisterer, M. (2022). Influence of Local Inhomogeneities in the REBCO Layer on the Mechanism of Quench Onset in 2G HTS Tapes. IEEE Transactions on Applied Superconductivity, 32(3), 1–7. https://doi.org/10.1109/TASC.2022.3151950

Bekheet, M. F., Delir Kheyrollahi Nezhad, P., Bonmassar, N., Schlicker, L., Gili, A., Praetz, S., Gurlo, A., Doran, A., Gao, Y., Heggen, M., Niaei, A., Farzi, A., Schwarz, S., Bernardi, J., Klötzer, B., & Penner, S. (2021). Steering the Methane Dry Reforming Reactivity of Ni/La₂O₃ Catalysts by Controlled In Situ Decomposition of Doped La₂NiO₄ Precursor Structures. ACS Catalysis, 11(1), 43–59. https://doi.org/10.1021/acscatal.0c04290

Bernardi, J. (2021). Energy-dispersive X-ray spectroscopy. In A. Walter, J. G. Mannheim, & C. J. Caruana (Eds.), Imaging Modalities for Biological and Preclinical Research: A Compendium, Volume 1: Part I: Ex vivo biological imaging. IOP Publishing. https://doi.org/10.1088/978-0-7503-3059-6ch41

Bernardi, J. (2021). Scanning transmission electron microscopy. In A. Walter, J. G. Mannheim, & C. J. Caruana (Eds.), Imaging Modalities for Biological and Preclinical Research: A Compendium, Volume 1: Part I: Ex vivo biological imaging. IOP Publishing. https://doi.org/10.1088/978-0-7503-3059-6ch29

Kirschner, J., Eisenmenger-Sittner, C., Bernardi, J., Großalber, A., Frank, S., & Simson, C. (2021). Structural Changes in Multi Principal Element Alloys in Dependence on the Aluminium Content. Materials Science Forum, 1016, 691–696. https://doi.org/10.4028/www.scientific.net/msf.1016.691

Moros, A., Ortino, M., Löffler, S., Alekseev, M., Tsapleva, A., Lukyanov, P., Abdyukhanov, I. M., Pantsyrny, V., Hopkins, S. C., Eisterer, M., Stöger-Pollach, M., & Bernardi, J. (2021). Nb3Sn Wires for the Future Circular Collider at CERN: Microstructural Investigation of Different Wire Layouts. IEEE Transactions on Applied Superconductivity, 31(5), 1–5. https://doi.org/10.1109/tasc.2021.3066541

Nezhad, P. D. K., Bekheet, M. F., Bonmassar, N., Schlicker, L., Gili, A., Kamutzki, F., Gurlo, A., Doran, A., Gao, Y., Heggen, M., Schwarz, S., Bernardi, J., Niaei, A., Farzi, A., Klötzer, B., & Penner, S. (2021). Mechanistic in situ insights into the formation, structural and catalytic aspects of the La2NiO4 intermediate phase in the dry reforming of methane over Ni-based perovskite catalysts. Applied Catalysis A: General, 612(117984), 117984. https://doi.org/10.1016/j.apcata.2020.117984

Ortino, M., Pfeiffer, S., Baumgartner, T., Sumption, M., Bernardi, J., Xu, X., & Eisterer, M. (2021). Evolution of the superconducting properties from binary to ternary APC-Nb3Sn wires. Superconductor Science and Technology, 34(3), 035028. https://doi.org/10.1088/1361-6668/abd5f4

Ploner, K., Delir Kheyrollahi Nezhad, P., Watschinger, M., Schlicker, L., Bekheet, M. F., Gurlo, A., Gili, A., Doran, A., Schwarz, S., Stöger-Pollach, M., Bernardi, J., Armbrüster, M., Klötzer, B., & Penner, S. (2021). Steering the methanol steam reforming performance of Cu/ZrO2 catalysts by modification of the Cu-ZrO2 interface dimensions resulting from Cu loading variation. Applied Catalysis A: General, 623(118279), 118279. https://doi.org/10.1016/j.apcata.2021.118279

Suchorski, Y., Zeininger, J., Buhr, S., Raab, M., Stöger-Pollach, M., Bernardi, J., Grönbeck, H., & Rupprechter, G. (2021). Resolving multifrequential oscillations and nanoscale interfacet communication in single particle catalysis. Science, 372(6548), 1314–1318. https://doi.org/10.1126/science.abf8107

Riedl, C., Schmid, A., Nenning, A., Summerer, H., Smetaczek, S., Schwarz, S., Bernardi, J., Opitz, A. K., Limbeck, A., & Fleig, J. (2020). Outstanding Oxygen Reduction Kinetics of La0.6Sr0.4FeO3−δ Surfaces Decorated with Platinum Nanoparticles. Journal of The Electrochemical Society, 167(10), 1–9. https://doi.org/10.1149/1945-7111/ab9c7f

Bonmassar, N., Bekheet, M. F., Schlicker, L., Gili, A., Gurlo, A., Doran, A., Gao, Y., Heggen, M., Bernardi, J., Klötzer, B., & Penner, S. (2020). In Situ-Determined Catalytically Active State of LaNiO₃ in Methane Dry Reforming. ACS Catalysis, 10(2), 1102–1112. https://doi.org/10.1021/acscatal.9b03687

Capra, M., Loria, F., Bernini, C., Bovone, G., Moros, A., Stöger-Pollach, M., Schachinger, T., Bernardi, J., Siri, A. S., & Vignolo, M. (2020). Method for the production of pure and C-doped nanoboron powders tailored for superconductive applications. Nanotechnology, 31(49), 494001. https://doi.org/10.1088/1361-6528/abb269

Leveratto, A., Saba, A., Holleis, S., Himmerlich, M., Henrist, B., Fernandez-Peña, S., Moros, A., Bernardi, J., Eisterer, M., Bernini, C., Vaglio, R., Putti, M., Ferdeghini, C., Calatroni, S., & Bellingeri, E. (2020). Future Circular Collider beam screen: progress on Tl-1223 HTS coating. Superconductor Science and Technology, 33(5), 054004. https://doi.org/10.1088/1361-6668/ab7fbd

Nedelkovski, V., Hahn, R., Mayrhofer, P. H., Steiger-Thirsfeld, A., Bernardi, J., & Thurner, P. J. (2020). Influence of experimental constraints on micromechanical assessment of micromachined hard-tissue samples. Journal of the Mechanical Behavior of Biomedical Materials, 106(103741), 103741. https://doi.org/10.1016/j.jmbbm.2020.103741

Opitz, A. K., Nenning, A., Vonk, V., Volkov, S., Bertram, F., Summerer, H., Schwarz, S., Steiger-Thirsfeld, A., Bernardi, J., Stierle, A., & Fleig, J. (2020). Understanding electrochemical switchability of perovskite-type exsolution catalysts. Nature Communications, 11(4801). https://doi.org/10.1038/s41467-020-18563-w

Yan, X., Bauer, E., Rogl, P., Bernardi, J., Prokofiev, A., & Paschen, S. (2020). Thermoelectric Properties and Stability of Nanocomposites Type I Clathrate Ba-Cu-Si with SiC. Journal of Inorganic and General Chemistry, 646(14), 1055–1061. https://doi.org/10.1002/zaac.202000043

Grünbacher, M., Tarjomannejad, A., Kheyrollahi Nezhad, P. D., Praty, C., Ploner, K., Mohammadi, A., Niaei, A., Klötzer, B., Schwarz, S., Bernardi, J., Farzi, A., Gómez, M. J. I., Torregrosa Rivero, V., & Penner, S. (2019). Promotion of La(Cu0.7Mn0.3)0.98M0.02O3 d (M = Pd, Pt, Ru and Rh) perovskite catalysts by noble metals for the reduction of NO by CO. Journal of Catalysis, 379, 18–32. https://doi.org/10.1016/j.jcat.2019.09.005

Ballarino, A., Hopkins, S. C., Bordini, B., Richter, D., Tommasini, D., Bottura, L., Benedikt, M., Sugano, M., Ogitsu, T., Kawashima, S., Saito, K., Fukumoto, Y., Sakamoto, H., Shimizu, H., Pantsyrny, V., Abdyukhanov, I., Shlyakov, M., Zernov, S., Buta, F., … Ferdeghini, C. (2019). The CERN FCC Conductor Development Program: A Worldwide Effort for the Future Generation of High-Field Magnets. IEEE Transactions on Applied Superconductivity, 29(5), Article 6001709. https://doi.org/10.1109/tasc.2019.2896469

Abada, A., Abbrescia, M., AbdusSalam, S. S., Abdyukhanov, I., Abelleira Fernandez, J., Abramov, A., Aburaia, M., Acar, A. O., Adzic, P. R., Agrawal, P., Aguilar-Saavedra, J. A., Aguilera-Verdugo, J. J., Aiba, M., Aichinger, I., Aielli, G., Akay, A., Akhundov, A., Aksakal, H., Albacete, J. L., … Zurita, J. (2019). HE-LHC: The High-Energy Large Hadron Collider Future Circular Collider Conceptual Design Report Volume 4. European Physical Journal - Special Topics, 228(5), 1109–1382. https://doi.org/10.1140/epjst/e2019-900088-6

Abada, A., Abbrescia, M., AbdusSalam, S. S., Abdyukhanov, I., Abelleira Fernandez, J., Abramov, A., Aburaia, M., Acar, A. O., Adzic, P. R., Agrawal, P., Aguilar-Saavedra, J. A., Aguilera-Verdugo, J. J., Aiba, M., Aichinger, I., Aielli, G., Akay, A., Akhundov, A., Aksakal, H., Albacete, J. L., … FCC Collaboration. (2019). FCC-hh: The Hadron Collider : Future Circular Collider Conceptual Design Report Volume 3. EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, 228(4), 755–1107. https://doi.org/10.1140/epjst/e2019-900087-0

Seifner, M. S., Dijkstra, A., Bernardi, J., Steiger-Thirsfeld, A., Sistani, M., Lugstein, A., Haverkort, J., & Barth, S. (2019). Epitaxial Ge0.81Sn0.19 Nanowires for Nanoscale Mid-Infrared Emitters. ACS Nano, 13, 1847–1854. https://doi.org/10.34726/2507

Abada, A., Abbrescia, M., AbdusSalam, S. S., Abdyukhanov, I., Abelleira Fernandez, J., Abramov, A., Aburaia, M., Acar, A. O., Adzic, P. R., Agrawal, P., Aguilar-Saavedra, J. A., Aguilera-Verdugo, J. J., Aiba, M., Aichinger, I., Aielli, G., Akay, A., Akhundov, A., Aksakal, H., Albacete, J. L., … FCC Collaboration. (2019). FCC-ee: The Lepton Collider : Future Circular Collider Conceptual Design Report Volume 2. EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, 228(2), 261–623. https://doi.org/10.1140/epjst/e2019-900045-4

Shakibi Nia, N., Martucci, A., Granozzi, G., García, G., Pastor, E., Penner, S., Bernardi, J., Alonso-Vante, N., & Kunze-Liebhäuser, J. (2019). DEMS studies of the ethanol electro-oxidation on TiOC supported Pt catalysts–Support effects for higher CO₂ efficiency. Electrochimica Acta, 304, 80–86. https://doi.org/10.1016/j.electacta.2019.02.089

Abada, A., Abbrescia, M., AbdusSalam, S. S., Abdyukhanov, I., Abelleira Fernandez, J., Abramov, A., Aburaia, M., Acar, A. O., Adzic, P. R., Agrawal, P., Aguilar-Saavedra, J. A., Aguilera-Verdugo, J. J., Aiba, M., Aichinger, I., Aielli, G., Akay, A., Akhundov, A., Aksakal, H., Albacete, J. L., … FCC Collaboration. (2019). FCC Physics Opportunities : Future Circular Collider Conceptual Design Report Volume 1. EUROPEAN PHYSICAL JOURNAL C, 79, Article 474. https://doi.org/10.1140/epjc/s10052-019-6904-3

Götsch, T., Köpfle, N., Grünbacher, M., Bernardi, J., Carbonio, E. A., Hävecker, M., Knop-Gericke, A., Bekheet, M. F., Schlicker, L., Doran, A., Gurlo, A., Franz, A., Klötzer, B., & Penner, S. (2019). Crystallographic and electronic evolution of lanthanum strontium ferrite (La0.6Sr0.4FeO3 d) thin film and bulk model systems during iron exsolution. Physical Chemistry Chemical Physics, 21(7), 3781–3794. https://doi.org/10.1039/c8cp07743f

Götsch, T., Köpfle, N., Schlicker, L., Carbonio, E. A., Hävecker, M., Knop-Gericke, A., Schloegl, R., Bekheet, M. F., Gurlo, A., Doran, A., Bernardi, J., Klötzer, B., & Penner, S. (2019). Treading in the Limited Stability Regime of Lanthanum Strontium Ferrite - Reduction, Phase Change and Exsolution. ECS Transactions, 91(1), 1771–1781. https://doi.org/10.1149/09101.1771ecst

Hauser, D., Auer, A., Kunze-Liebhäuser, J., Schwarz, S., Bernardi, J., & Penner, S. (2019). Hybrid synthesis of zirconium oxycarbide nanopowders with defined and controlled composition. RSC Advances, 9(6), 3151–3156. https://doi.org/10.1039/c8ra09584a

Hayati-Roodbari, N., Berger, R. J. F., Bernardi, J., Kinge, S., Hüsing, N., & Elsaesser, M. S. (2019). From sol-gel prepared porous silica to monolithic porous Mg2Si/ MgO composite materials. Journal of Sol-Gel Science and Technology, 89(1), 295–302. https://doi.org/10.1007/s10971-018-4778-8

Kocsis, K., Niedermaier, M., Kasparek, V., Bernardi, J., Redhammer, G., Bockstedte, M., Berger, T., & Diwald, O. (2019). From Anhydrous Zinc Oxide Nanoparticle Powders to Aqueous Colloids: Impact of Water Condensation and Organic Salt Adsorption on Free Exciton Emission. Langmuir, 35(26), 8741–8747. https://doi.org/10.1021/acs.langmuir.9b00656

Lukashuk, L., Yigit, N., Li, H., Bernardi, J., Föttinger, K., & Rupprechter, G. (2019). Operando XAS and NAP-XPS investigation of CO oxidation on meso- and nanoscale CoO catalysts. Catalysis Today, 336, 139–147. https://doi.org/10.1016/j.cattod.2018.12.052

Niedermaier, M., Schwab, T., Dolcet, P., Bernardi, J., Gross, S., Bockstedte, M., & Diwald, O. (2019). Cobalt and Iron Ions in MgO Nanocrystals: Should They Stay or Should They Go. Journal of Physical Chemistry C, 123(42), 25991–26004. https://doi.org/10.1021/acs.jpcc.9b07350

Niedermaier, M., Taniteerawong, C., Schwab, T., Zickler, G., Bernardi, J., & Diwald, O. (2019). Impurity Segregation and Nanoparticle Reorganization of Indium Doped MgO Cubes. ChemNanoMat, 5(5), 634–641. https://doi.org/10.1002/cnma.201900077

Ploner, K., Schlicker, L., Gili, A., Gurlo, A., Doran, A., Zhang, L., Armbrüster, M., Obendorf, D., Bernardi, J., Klötzer, B., & Penner, S. (2019). Reactive metal-support interaction in the Cu-In2O3 system: intermetallic compound formation and its consequences for CO2-selective methanol steam reforming. Science and Technology of Advanced Materials, 20(1), 356–366. https://doi.org/10.1080/14686996.2019.1590127

Schöbel, M., Fernández, R., Koos, R., & Bernardi, J. (2019). Elasto-plastic deformation in Al-Cu cast alloys for engine components. Journal of Alloys and Compounds, 775, 617–627. https://doi.org/10.1016/j.jallcom.2018.10.109

Suchorski, Y., Datler, M., Bespalov, I., Zeininger, J., Stöger-Pollach, M., Bernardi, J., Grönbeck, H., & Rupprechter, G. (2019). Surface-Structure Libraries: Multifrequential Oscillations in Catalytic Hydrogen Oxidation on Rhodium. Journal of Physical Chemistry C, 123(7), 4217–4227. https://doi.org/10.1021/acs.jpcc.8b11421

Baumgartner, T., Pfeiffer, S., Bernardi, J., Ballarino, A., & Eisterer, M. (2018). Effects of inhomogeneities on pinning force scaling in Nb3Sn wires. Superconductor Science and Technology. https://doi.org/10.1088/1361-6668/aac87e

Ebermann, P., Bernardi, J., Fleiter, J., Lackner, F., Meuter, F., Pieler, M., Scheuerlein, C., Schoerling, D., Wolf, F., Ballarino, A., Bottura, L., Tommasini, D., Savary, F., & Eisterer, M. (2018). Irreversible degradation of Nb3Sn Rutherford cables due to transverse compressive stress at room temperature. Superconductor Science and Technology, 31(6), 065009. https://doi.org/10.1088/1361-6668/aab5fa

Götsch, T., Hauser, D., Köpfle, N., Bernardi, J., Klötzer, B., & Penner, S. (2018). Complex oxide thin films: Pyrochlore, defect fluorite and perovskite model systems for structural, spectroscopic and catalytic studies. Applied Surface Science, 452, 190–200. https://doi.org/10.1016/j.apsusc.2018.05.019

Götsch, T., Ploner, K., Bernardi, J., Schlicker, L., Gili, A., Doran, A., Gurlo, A., & Penner, S. (2018). Formation of Pd-Ce intermetallic compounds by reductive metal-support interaction. Journal of Solid State Chemistry, 265, 176–183. https://doi.org/10.1016/j.jssc.2018.05.036

Kashanian, F., Kokkinis, G., Bernardi, J., Zand, M. R., Shamloo, A., & Giouroudi, I. (2018). A novel magnetic microfluidic platform for on-chip separation of 3 types of silica coated magnetic nanoparticles (Fe₃O₄@SiO₂). Sensors and Actuators A: Physical, 270, 223–230. https://doi.org/10.1016/j.sna.2017.12.047

Linz, M., Rodríguez Ripoll, M., Pauly, C., Bernardi, J., Steiger-Thirsfeld, A., Franek, F., Mücklich, F., & Gachot, C. (2018). Heterogeneous Strain Distribution and Saturation of Geometrically Necessary Dislocations in a Ferritic-Pearlitic Steel during Lubricated Sliding. Advanced Engineering Materials, 20(4), Article 1700810. https://doi.org/10.1002/adem.201700810

Rodríguez Ripoll, M., Totolin, V., Gabler, C., Bernardi, J., & Minami, I. (2018). Diallyl disulphide as natural organosulphur friction modifier via the in-situ tribo-chemical formation of tungsten disulphide. Applied Surface Science, 428, 659–668. https://doi.org/10.1016/j.apsusc.2017.09.100

Salihovic, M., Hüsing, N., Bernardi, J., Presser, V., & Elsaesser, M. S. (2018). Carbon aerogels with improved flexibility by sphere templating. RSC Advances, 8(48), 27326–27331. https://doi.org/10.1039/c8ra04848g

Suchorski, Y., Datler, M., Bespalov, I., Zeininger, J., Stöger-Pollach, M., Bernardi, J., Grönbeck, H., & Rupprechter, G. (2018). Visualizing catalyst heterogeneity by a multifrequential oscillating reaction. Nature Communications, 9(600). https://doi.org/10.1038/s41467-018-03007-3

Thomele, D., Gheisi, A. R., Niedermaier, M., Elsässer, M. S., Bernardi, J., Grönbeck, H., & Diwald, O. (2018). Thin water films and particle morphology evolution in nanocrystalline MgO. Journal of the American Ceramic Society, 101(11), 4994–5003. https://doi.org/10.1111/jace.15775

Yakymovych, A., Kaptay, G., Flandorfer, H., Bernardi, J., Schwarz, S., & Ipser, H. (2018). The nano heat effect of replacing macro-particles by nano-particles in drop calorimetry: the case of core/shell metal/oxide nano-particles. RSC Advances, 8(16), 8856–8869. https://doi.org/10.1039/c7ra13643a

Seifner, M. S., Hernandez, S., Bernardi, J., Romano-Rodriguez, A., & Barth, S. C. (2017). Pushing the composition limit of anisotropic Ge1–xSnx nanostructures and determination of their thermal stability. Chemistry of Materials. https://doi.org/10.1021/acs.chemmater.7b03969

Yan, X., Prokofiev, A., Bauer, E., Rogl, P., Bernardi, J., & Paschen, S. (2017). Dependences of phase stability and thermoelectric properties of type-I clathrate Ba8Cu4.5Si6Ge35.5 on synthesis process parameters. Journal of Alloys and Compounds, 725, 783–791. https://doi.org/10.1016/j.jallcom.2017.07.210

Baumgartner, T., Hecher, J., Bernardi, J., Pfeiffer, S., Senatore, C., & Eisterer, M. (2017). Assessing composition gradients in multifilamentary superconductors by means of magnetometry methods. Superconductor Science and Technology, 30(1), 014011. https://doi.org/10.1088/0953-2048/30/1/014011

Gheisi, A. R., Niedermaier, M., Tippelt, G., Lottermoser, W., Bernardi, J., & Diwald, O. (2017). Iron Precursor Decomposition in the Magnesium Combustion Flame: A New Approach for the Synthesis of Particulate Metal Oxide Nanocomposites. Particle & Particle Systems Characterization, 1700109.

Hayati-Roodbari, N., Berger, R. J. F., Bernardi, J., Kinge, S., Hüsing, N., & Elsaesser, M. S. (2017). Monolithic porous magnesium silicide. Dalton Transactions, 46(27), 8855–8860. https://doi.org/10.1039/c7dt00571g

Köpfle, N., Mayr, L., Schmidmair, D., Bernardi, J., Knop-Gericke, A., Hävecker, M., Klötzer, B., & Penner, S. (2017). A Comparative Discussion of the Catalytic Activity and CO2-Selectivity of Cu-Zr and Pd-Zr (Intermetallic) Compounds in Methanol Steam Reforming. Catalysts, 7(12), 1–17. https://doi.org/10.3390/catal7020053

Navickas, E., Chen, Y., Lu, Q., Wallisch, W., Huber, T. M., Bernardi, J., Stöger-Pollach, M., Friedbacher, G., Hutter, H., Yildiz, B., & Fleig, J. (2017). Dislocations Accelerate Oxygen Ion Diffusion in La0.8Sr0.2MnO3 Epitaxial Thin Films. ACS Nano, 11(11), 11475–11487. https://doi.org/10.1021/acsnano.7b06228

Niedermaier, M., Dolcet, P., Gheisi, A. R., Tippelt, G., Lottermoser, W., Gross, S., Bernardi, J., & Diwald, O. (2017). Stability and Local Environment of Iron in Vapor Phase Grown MgO Nanocrystals. Journal of Physical Chemistry C, 121(43), 24292–24301. https://doi.org/10.1021/acs.jpcc.7b07089

Ploner, K., Götsch, T., Kogler, G., Thalinger, R., Bernardi, J., Zhao, Q., Zhuo, C., Klötzer, B., & Penner, S. (2017). Structural and Catalytic Properties of Ag- and Co3O4‑Impregnated Strontium Titanium Ferrite SrTi0.7Fe0.3O3−δ in Methanol Steam Reforming. Industrial & Engineering Chemistry Research, 56(46), 13654–13662. https://doi.org/10.1021/acs.iecr.7b03778

Putz, F., Morak, R., Elsaesser, M. S., Balzer, C., Braxmeier, S., Bernardi, J., Paris, O., Reichenauer, G., & Hüsing, N. (2017). Setting Directions: Anisotropy in Hierarchically Organized Porous Silica. Chemistry of Materials, 29(18), 7969–7975. https://doi.org/10.1021/acs.chemmater.7b03032

Thomele, D., Bourret, G. R., Bernardi, J., Bockstedte, M., & Diwald, O. (2017). Hydroxylation Induced Alignment of Metal Oxide Nanocubes. Angewandte Chemie International Edition, 56, 1407–1410.

Thomele, D., Bourret, G. R., Bernardi, J., Bockstedte, M., & Diwald, O. (2017). Organisation von Metalloxid-Nanowgrfeln durch Hydroxylierung. Angewandte Chemie International Edition, 129, 1428–1432.

Wolfbeisser, A., Kovács, G., Kozlov, S. M., Föttinger, K., Bernardi, J., Klötzer, B., Neyman, K. M., & Rupprechter, G. (2017). Surface Composition Changes of CuNi-ZrO2 during Methane Decomposition: An operando NAP-XPS and Density Functional Study. Catalysis Today, 283, 134–143. https://doi.org/10.1016/j.cattod.2016.04.022

Zickler, G. A., Fidler, J., Bernardi, J., Schrefl, T., & Asali, A. (2017). A combined TEM/STEM and micromagnetic study of the anisotropic nature of grain boundaries and coercivity in Nd-Fe-B magnets. Advances in Materials Science and Engineering, 2017, 1–12. https://doi.org/10.1155/2017/6412042

Datler, M., Bespalov, I., Buhr, S., Zeininger, J., Stöger-Pollach, M., Bernardi, J., Rupprechter, G., & Suchorski, Y. (2016). Hydrogen oxidation on stepped Rh surfaces: µm-scale versus nanoscale. Catalysis Letters. https://doi.org/10.1007/s10562-016-1824-4

Roshangias, A., Bernardi, J., & Ipser, H. (2016). An attempt to synthesize Sn-Zn-Cu alloy nanoparticles. Materials Letters, 178, 10–14. https://doi.org/10.1016/j.matlet.2016.04.192

Christian, R., Ikeda, M., Lientschnig, G., Prochaska, L., Prokofiev, A., Tomes, P., Yan, X., Zolriasatein, A., Bernardi, J., Schachinger, T., Schwarz, S., Steiger-Thirsfeld, A., Rogl, P., Populoh, S., Weidenkaff, A., & Paschen, S. (2016). Nanostructured clathrates and clathrate-based nanocomposites. Physica Status Solidi (a) – Applications and Materials Science, 12, 1–18.

Kocsis, K., Niedermaier, M., Bernardi, J., Berger, T., & Diwald, O. (2016). Changing interfaces: Photoluminescent ZnO nanoparticle powders in different aqueous environments. Surface Science, 652, 253–260. https://doi.org/10.1016/j.susc.2016.02.019

Linz, M., Walzhofer, F., Krenn, S., Steiger-Thirsfeld, A., Bernardi, J., Winkelmann, H., & Badisch, E. (2016). Surface crack propagation and morphology in cutting tools. Industrial Lubrication and Tribology, 68(1), 141–148. https://doi.org/10.1108/ilt-10-2015-0144

Mayr, L., Klötzer, B., Schmidmair, D., Köpfle, N., Bernardi, J., Schwarz, S., Armbrüster, M., & Penner, S. (2016). Boosting Hydrogen Production from Methanol and Water by in situ Activation of Bimetallic Cu−Zr Species. ChemCatChem, 8(10), 1778–1781.

Mayr, L., Köpfle, N., Klötzer, B., Götsch, T., Bernardi, J., Schwarz, S., Keilhauer, T., Armbrüster, M., & Penner, S. (2016). Microstructural and Chemical Evolution and Analysis of a Self- Activating CO2‑Selective Cu−Zr Bimetallic Methanol Steam Reforming Catalyst. Journal of Physical Chemistry C, 120(44), 25395–25404. https://doi.org/10.1021/acs.jpcc.6b07824

Prokofiev, A., Svagera, R., Waas, M., Weil, M., Bernardi, J., & Paschen, S. (2016). Mechanism of rare earth incorporation and crystal growth of rare earth containing type-I clathrates. Crystal Growth and Design, 16(1), 25–33. https://doi.org/10.1021/acs.cgd.5b00461

Roshanghias, A., Khatibi, G., Yakymovych, A., Bernardi, J., & Ipser, H. (2016). Sn-Ag-Cu nanosolders: Solder joints integrity and strength. Journal of Electronic Materials, 45(8), 4390–4399. https://doi.org/10.1007/s11664-016-4584-4

Rupprechter, G., Anic, K., Wolfbeisser, A., Li, H., Rameshan, C., Föttinger, K., & Bernardi, J. (2016). Surface spectroscopy on UHV-grown and technological Ni–ZrO2 reforming catalysts: from UHV to operando conditions. Topics in Catalysis. https://doi.org/10.1007/s11244-016-0678-8

Schneider, J., Franke, M., Gurrath, M., Röckert, M., Berger, T., Bernardi, J., Meyer, B., Steinrück, H.-P., Lytken, O., & Diwald, O. (2016). Porphyrin Metalation at MgO Surfaces: A Spectroscopic and Quantum Mechanical Study on Complementary Model Systems. Chemistry - A European Journal, 22, 1744–1749.

Schneider, J., Kollhoff, F., Schindler, T., Bichlmaier, S., Bernardi, J., Unruh, T., Libuda, J., Berger, T., & Diwald, O. (2016). Adsorption, Ordering, and Metalation of Porphyrins on MgO Nanocube Surfaces: The Directional Role of Carboxylic Anchoring Groups. Journal of Physical Chemistry C, 120(47), 26879–26888. https://doi.org/10.1021/acs.jpcc.6b08956

Schoiber, J., Berger, R. J. F., Bernardi, J., Schubert, M., Yada, C., Miki, H., & Hüsing, N. (2016). Straightforward Solvothermal Synthesis toward Phase Pure Li2CoPO4F. Crystal Growth and Design, 16(9), 4999–5005. https://doi.org/10.1021/acs.cgd.6b00573

Schöbel, M., Dobron, P., Bernardi, J., Wimpory, R., & Weidenmann, K. (2016). Elasto-plastic deformation within diamond reinforced metals for thermal management. Diamond and Related Materials, 70, 52–58. https://doi.org/10.1016/j.diamond.2016.09.027

Seifner, M. S., Pertl, P., Bernardi, J., Biswas, S., Holmes, J. D., & Barth, S. (2016). Lead-supported germanium nanowire growth. Materials Letters, 173, 248–251. https://doi.org/10.1016/j.matlet.2016.03.066

Thomele, D., Siedl, N., Bernardi, J., & Diwald, O. (2016). Electronic Reducibility Scales with Intergranular Interface Area in Consolidated In 2 O 3 Nanoparticles Powders. Journal of Physical Chemistry C, 120(8), 4581–4588. https://doi.org/10.1021/acs.jpcc.5b10648

Wolfbeisser, A., Sophiphun, O., Bernardi, J., Wittayakun, J., Föttinger, K., & Rupprechter, G. (2016). Methane dry reforming over ceria-zirconia supported Ni catalysts. Catalysis Today, 277, 234–245. https://doi.org/10.1016/j.cattod.2016.04.025

Barth, S., Seifner, M. S., & Bernardi, J. (2015). Microwave-assisted solution-liquid-solid growth of Ge1−xSnx nanowires with high tin content. Chemical Communications, 51(61), 12282–12285. https://doi.org/10.1039/c5cc03639a

Buchegger, C., Lengauer, W., Bernardi, J., Gruber, J., Ntaflos, T., Kiraly, F., & Langlade, J. (2015). Diffusion parameters of grain-growth inhibitors in WC based hardmetals with Co, Fe/Ni and Fe/Co/Ni binder alloys. International Journal of Refractory Metals and Hard Materials, 49, 67–74. https://doi.org/10.1016/j.ijrmhm.2014.06.002

Lao, M., Bernardi, J., Bauer, M., & Eisterer, M. (2015). Critical current anisotropy of GdBCO tapes grown on ISD-MgO buffered substrate. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 28(12), 124002. https://doi.org/10.1088/0953-2048/28/12/124002

Luczynski, K. W., Steiger-Thirsfeld, A., Bernardi, J., Eberhardsteiner, J., & Hellmich, C. (2015). Extracellular Bone Matrix Exhibits Hardening Elastoplasticity and more than Double Cortical Strength: Evidence from Homogeneous Compression of Non-Tapered Single Micron-Sized Pillars Welded to a Rigid Substrate. Journal of the Mechanical Behavior of Biomedical Materials, 52, 51–62. https://doi.org/10.1016/j.jmbbm.2015.03.001

Schneider, J., Kollhoff, F., Bernardi, J., Kaftan, A., Libuda, J., Berger, T., Laurin, M., & Diwald, O. (2015). Porphyrin Metalation at the MgO Nanocube/Toluene Interface. ACS APPLIED MATERIALS & INTERFACES, 7(41), 22962–22969. https://doi.org/10.1021/acsami.5b08123

Seifner, M. S., Biegger, F., Lugstein, A., Bernardi, J., & Barth, S. (2015). Microwave-Assisted Ge1−xSnx Nanowire Synthesis: Precursor Species and Growth Regimes. Chemistry of Materials, 27(17), 6125–6130. https://doi.org/10.1021/acs.chemmater.5b02757

Sologub, O., Salamakha, L., Rogl, P., Stöger, B., Bauer, E., Bernardi, J., Giester, G., Waas, M., & Svagera, R. (2015). Pt-B system re-visited: Pt2B, a new structure type of binary borides. Ternary WAl12-type derivative borides. Inorganic Chemistry. https://doi.org/10.1021/acs.inorgchem.5b01998

Sternig, A., Bernardi, J., McKenna, K., & Diwald, O. (2015). Surface-specific visible light luminescence from composite metal oxide nanocrystals. Journal of Materials Science, 50(24), 8153–8165. https://doi.org/10.1007/s10853-015-9393-2

Wallisch, W., Fidler, J., Toson, P., Sassik, H., Svagera, R., & Bernardi, J. (2015). Synthesis and characterisation of (Fe,Co)2-3B microcrystalline alloys. Journal of Alloys and Compounds, 644, 199–204. https://doi.org/10.1016/j.jallcom.2015.04.179

Wolfbeisser, A., Klötzer, B., Mayr, L., Rameshan, R., Zemlyanov, D., Bernardi, J., Föttinger, K., & Rupprechter, G. (2015). Surface modification processes during methane decomposition on Cu-promoted Ni-ZrO₂ catalysts. Catalysis Science & Technology, 5(2), 967–978.

Barth, S., Seifner, M. S., & Bernardi, J. (2014). Growth of monocrystalline In₂O₃ nanowires by seed orientation dependent vapour-solid-solid mechanism. JOURNAL OF MATERIALS CHEMISTRY C, 2(29), 5747. https://doi.org/10.1039/c4tc00878b

Kubicek, M., Huber, T. M., Welzl, A., Penn, A., Rupp, G. M., Bernardi, J., Stöger-Pollach, M., Hutter, H., & Fleig, J. (2014). Electrochemical properties of La0.6Sr0.4CoO3−δ thin films investigated by complementary impedance spectroscopy and isotope exchange depth profiling. Solid State Ionics, 256, 38–44. https://doi.org/10.1016/j.ssi.2013.12.016

Kubicek, M., Rupp, G. M., Huber, S., Penn, A., Opitz, A. K., Bernardi, J., Stöger-Pollach, M., Hutter, H., & Fleig, J. (2014). Cation diffusion in La0.6Sr0.4CoO3−δ below 800 °C and its relevance for Sr segregation. Physical Chemistry Chemical Physics, 16(6), 2715. https://doi.org/10.1039/c3cp51906f

Roshanghias, A., Khatibi, G., Pelzer, R., Steinbrenner, J., & Bernardi, J. (2014). Cross-sectional nanoindentation (CSN) studies on the effect of thickness on adhesion strength of thin films. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 48(3), 035301. https://doi.org/10.1088/0022-3727/48/3/035301

Schöbel, M., Baumgartner, G., Gerth, S., Bernardi, J., & Hofmann, M. (2014). Microstresses and crack formation in AlSi7MgCu and AlSi17Cu4 alloys for engine components. Acta Materialia, 81, 401–408. https://doi.org/10.1016/j.actamat.2014.07.052

Walzhofer, F., Linz, M., Steiger-Thirsfeld, A., Bernardi, J., Badisch, E., Winkelmann, H., & Gachot, C. (2014). Characterization of Frictional Stressed White Etching Layers out of Cutting Tools by Means of Transmission Electron Microscopy (TEM). Praktische Metallographie, 51(7), 485–498. https://doi.org/10.3139/147.110300

Andrejs, L., Oßmer, H., Friedbacher, G., Bernardi, J., Limbeck, A., & Fleig, J. (2013). Conductive AFM and chemical analysis of highly conductive paths in DC degraded PZT with Ag/Pd electrodes. Solid State Ionics, 244, 5–16. https://doi.org/10.1016/j.ssi.2013.04.020

Pummer, B. G., Atanasova, L., Bauer, H., Bernardi, J., Druzhinina, I. S., & Grothe, H. (2013). Spores of most common airborne fungi reveal no ice nucleation activity. Biogeosciences Discussions, 10(6), 10125–10141. https://doi.org/10.5194/bgd-10-10125-2013

Pummer, B. G., Atanasova, L., Bauer, H., Bernardi, J., Druzhinina, I. S., Fröhlich-Nowoisky, J., & Grothe, H. (2013). Spores of many common airborne fungi reveal no ice nucleation activity in oil immersion freezing experiments. Biogeosciences, 10(12), 8083–8091. https://doi.org/10.5194/bg-10-8083-2013

Pummer, B. G., Bauer, H., Bernardi, J., Chazallon, B., Facq, S., Lendl, B., Whitmore, K., & Grothe, H. (2013). Chemistry and morphology of dried-up pollen suspension residues. Journal of Raman Spectroscopy, 44(12), 1654–1658.

Khatibi, G., Weiss, B., Bernardi, J., & Schwarz, S. (2012). Microstructural investigation of interfacial features in Al wire bonds. Journal of Electronic Materials, 41(12), 3436–3446. https://doi.org/10.1007/s11664-012-2215-2

Neouze, M.-A., Litschauer, M., Puchberger, M., & Bernardi, J. (2012). Ionic Bis-Nanoparticle Networks. Monatshefte Für Chemie - Chemical Monthly, 143(4), 519–525. https://doi.org/10.1007/s00706-011-0709-x

Pummer, B. G., Bauer, H., Bernardi, J., Bleicher, S., & Grothe, H. (2012). Suspendable macromolecules are responsible for ice nucleation activity of birch and conifer pollen. Atmospheric Chemistry and Physics, 12(5), 2541–2550. https://doi.org/10.5194/acp-12-2541-2012

Baumann, S. O., Elser, M. J., Auer, M., Bernardi, J., Hüsing, N., & Diwald, O. (2011). Solid−Solid Interface Formation in TiO2 Nanoparticle Networks. Langmuir, 27(5), 1946–1953. https://doi.org/10.1021/la104213d

Pummer, B. G., Bauer, H., Bernardi, J., Bleicher, S., & Grothe, H. (2011). Birch and conifer pollen are efficient atmospheric ice nuclei. Atmospheric Chemistry and Physics Discussion, 11, 27219–27241. https://doi.org/10.5194/acpd-11-27219-2011

Stanzl-Tschegg, S., Eichinger, K., Weidner, A., Tschegg, E., Bernardi, J., & Schönbauer, B. (2011). Role of impurities and PSBs on microcracking of polycrystalline copper at very high numbers of cycles. Key Engineering Materials, 465, 29–34. https://doi.org/10.4028/www.scientific.net/kem.465.29

Sternig, A., Klacar, S., Bernardi, J., Stöger-Pollach, M., Grönbeck, H., & Diwald, O. (2011). Phase separation at the nanoscale: Structural properties of BaO segregates on MgO-based nanoparticles. Journal of Physical Chemistry C, 115(32), 15853–15861. https://doi.org/10.1021/jp204043g

D’Arienzo, M., Siedl, N., Sternig, A., Scotti, R., Morazzoni, F., Bernardi, J., & Diwald, O. (2010). Solar light and dopant-induced recombination effects: Photoactive nitrogen in TiO2 as a case study. JOURNAL OF PHYSICAL CHEMISTRY C, 114(42), 18067–18072. https://doi.org/10.1021/jp105426t

Haghofer, A., Sonström, P., Fenske, D., Föttinger, K., Schwarz, S., Bernardi, J., Al-Shamery, K., Bäumer, M., & Rupprechter, G. (2010). Colloidally Prepared Pt-Nanowires versus Impregnated Pt Nanoparticles: Comparison of Adsorption and Reaction Properties. Langmuir, 26(21), 16330–16338.

Stankic, S., Sternig, A., Finocchi, F., Bernardi, J., & Diwald, O. (2010). Zinc oxide scaffolds on MgO nanocubes. Nanotechnology, 21(35), 355603. https://doi.org/10.1088/0957-4484/21/35/355603

Sternig, A., Müller, M., McCallum, M., Bernardi, J., & Diwald, O. (2010). BaO clusters on MgO nanocubes: A quantitative analysis of optical-powder properties. Small, 6(4), 582–588. https://doi.org/10.1002/smll.200901662

Rameis, M., Cei, S., Bernardi, J., Watzek, G., & Gruber, R. (2009). Development of an “in vitro” model on cellular adhesion on granular natural bone mineral under dynamic seeding conditions - A pilot study. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 91B(2), 766–771. https://doi.org/10.1002/jbm.b.31453

Riss, A., Elser, M., Bernardi, J., & Diwald, O. (2009). Stability and Photoelectronic Properties of Titanate Nanostructures. Journal of the American Chemical Society, 131, 6198–6206.

Siedl, N., Elser, M., Bernardi, J., & Diwald, O. (2009). Functional Interfaces in Pure and Blended Oxide Nanoparticle Networks: Recombination versus Separation of Photogenerated Charges. Journal of Physical Chemistry C, 113, 15792–15795.

Siedl, N., Elser, M., Halwax, E., Bernardi, J., & Diwald, O. (2009). When Fewer Photons Do More: A Comparative O2 Photoadsorption Study on Vapor-Deposited TiO2 and ZrO2 Nanocrystal Ensembles. Journal of Physical Chemistry C, 113, 9175–9181.

Lorenz, H., Stöger-Pollach, M., Schwarz, S., Pfaller, K., Klötzer, B., Bernardi, J., & Penner, S. (2008). A new preparation pathway to well-defined In2O3 nanoparticles at low substrate temperatures. Journal of Physical Chemistry C, 112(4), 918–925. https://doi.org/10.1021/jp077354y

Müller, M., Sternig, A., Stankic, S., Stöger-Pollach, M., Bernardi, J., Knözinger, E., & Diwald, O. (2008). Nanoparticles as a support: CaO deposits on MgO cubes. Journal of Physical Chemistry C, 112, 9120–9123.

Pauschitz, A., Kvasnica, S., Jisa, R., Bernardi, J., Koch, T., & Roy, M. (2008). Tribological behaviour of Ti containing nanocomposite DLC film under milli-Newton load range. Diamond and Related Materials, 17(12), 2010–2018. https://doi.org/10.1016/j.diamond.2008.06.011

Riss, A., Berger, T., Stankic, S., Bernardi, J., Knözinger, E., & Diwald, O. (2008). Charge Separation in layered Titanate Nanostructures: Effect of Ion Exchange induced Morphology Transformation. Angewandte Chemie International Edition, 47(8), 1496–1499. https://doi.org/10.1002/anie.200703817

Riss, A., Berger, T., Stankic, S., Bernardi, J., Knözinger, E., & Diwald, O. (2008). Ladungstrennung in nanoskaligen Titanat-Schichten: Einfluss von Ionenaustausch und Morphologieumwandlung auf die photoelektronischen Eigenschaften. Angewandte Chemie, 120(8), 1518–1522. https://doi.org/10.1002/ange.200703817

Sternig, A., Stankic, S., Müller, M., Bernardi, J., Knözinger, E., & Diwald, O. (2008). Photoluminescent nanoparticle surfaces: the potential of alkaline earth oxides for optical applications. Advanced Materials, 20(24), 4840–4844. https://doi.org/10.1002/adma.200800560

Riss, A., Berger, T., Grothe, H., Bernardi, J., Diwald, O., & Knözinger, E. (2007). Chemical control of photoexcited states in titanate nanostructures. Nano Letters, 7(2), 433–438.

Simon, F., Peterlik, H., Pfeiffer, R., Bernardi, J., & Kuzmany, H. (2007). Fullerene release from the inside of carbon nanotubes: A possible route toward drug delivery. Chemical Physics Letters, 445(4–6), 288–292. https://doi.org/10.1016/j.cplett.2007.08.014

Stankic, S., Bernardi, J., Diwald, O., & Knözinger, E. (2007). Photoexcitation of local surface structures on Strontium oxide grains. Journal of Physical Chemistry C, 111(22), 8069–8074. https://doi.org/10.1021/jp070538s

Sá, J., Bernardi, J., & Anderson, J. A. (2007). Imaging of low temperature induced SMSI on Pd/TiO2 catalysts. Catalysis Letters, 114(1–2), 91–95. https://doi.org/10.1007/s10562-007-9049-1

Vital, A., Richter, J., Figi, R., Nagel, O., Aneziris, C. G., Bernardi, J., & Graule, T. (2007). One-step flame synthesis of ultrafine SiO2-C nanocomposite particles with high carbon loading and their carbothermal conversion. Industrial & Engineering Chemistry Research, 46(12), 4273–4281. https://doi.org/10.1021/ie061374p

Elser, M. J., Berger, T., Brandhuber, D., Bernardi, J., Diwald, O., & Knözinger, E. (2006). Particles coming together: electron centers in adjoined TiO2 nanocrystals. Journal of Physical Chemistry B (Soft Condensed Matter and Biophysical Chemistry), 110(15), 7605–7608. https://doi.org/10.1021/jp0607465

Kvasnica, S., Schalko, J., Eisenmenger-Sittner, C., Bernardi, J., Vorlaufer, G., Pauschitz, A., & Roy, M. (2006). Nanotribological study of PECVD DLC and reactively sputtered Ti containing carbon films. Diamond and Related Materials, 15(10), 1743–1752. https://doi.org/10.1016/j.diamond.2006.03.005

Lugstein, A., Bernardi, J., Tomastik, C., & Bertagnolli, E. (2006). Synthesis of nanowires in room temperature ambient: A focused ion beam approach. Applied Physics Letters, 88, 1631141–1631143.

Simon, F., Kuzmany, H., Fülöp, F., Jánossy, A., Bernardi, J., Hauke, F., & Hirsch, A. (2006). Encapsulating C59N azafullerenes inside single-wall carbon nanotubes. Physica Status Solidi (b) – Basic Solid State Physics, 243(13), 3263–3267. https://doi.org/10.1002/pssb.200669200

Stankic, S., Bernardi, J., Diwald, O., & Knözinger, E. (2006). Optical surface properties and morphology of MgO and CaO Nanocrystals. Journal of Physical Chemistry B (Soft Condensed Matter and Biophysical Chemistry), 110, 13866–13871.

Berger, T., Sterrer, M., Stankic, S., Bernardi, J., Diwald, O., & Knözinger, E. (2005). Trapping of photogenerated charges in oxide nanoparticles. Materials Science and Engineering: C, 25(5–8), 664–668.

Stankic, S., Müller, M., Diwald, O., Sterrer, M., Knözinger, E., & Bernardi, J. (2005). MgO-Nanowürfel: über die Abhängigkeit der optischen Eigenschaften von der Teilchengröße. Angewandte Chemie, 117, 4996–4999.

Stankic, S., Müller, M., Diwald, O., Sterrer, M., Knözinger, E., & Bernardi, J. (2005). Size-Dependent Optical Properties of MgO Nanocubes. Angewandte Chemie International Edition, 44, 4917–4920.

Stankic, S., Sterrer, M., Hofmann, P., Bernardi, J., Diwald, O., & Knözinger, E. (2005). Novel optical properties of Ca(2+)-doped MgO nanocrystals. Nano Letters, 5(10), 1889–1893.