Präsentationen und Postervorträge von Teammitgliedern

Vorträge bei Konferenzen und Seminaren

  1. J. Eßmeister, L. Schachtner, A. Altun, M. Schwentenwein, E. Szoldatits, K. Föttinger, T. Konegger: “Stereolithography-based additive manufacturing of polymer-derived catalyst carrier structures”; CellMat 2022, Dresden, Germany, 12.10.2022 – 14.12.2022.
  2. J. Rauchenecker, J. Rabitsch, M. Schwentenwein, T. Konegger: “Additive manufacturing of aluminum nitride ceramics with high thermal conductivity via lithography-based ceramic manufacturing”; Ceramics in Europe 2022, Krakow, Poland, 10.07.2022 – 14.07.2022.
  3. J. Eßmeister, A. Altun, M. Staudacher, T. Lube, M. Schwentenwein, T. Konegger: „Lithography-based additive manufacturing of polymer-derived SiOC/SiC composites”; Ceramics in Europe 2022, Krakow, Poland, 10.07.2022 – 14.07.2022.
  4. T. Konegger, C. Drechsel, H. Peterlik: “Evolution of Transient Microporosity in Polymer-derived Ceramics: in-situ Monitoring and Tailoring Strategies"; CIMTEC 2022, Perugia, Italy; 20.06.2022 - 24.06.2022. Invited talk.
  5. J. Eßmeister, L. Schachtner, E. Szoldatits, K. Föttinger, T. Konegger: "Metal-modified polymer-derived ceramics for stereolithography-based fabrication of catalyst carrier structures"; CIMTEC 2022, Perugia, Italy; 20.06.2022 - 24.06.2022.
  6. T. Konegger, C. Drechsel, M. Stöger-Pollach, H. Peterlik: “In-situ monitoring of the micropore evolution during the pyrolytic conversion of preceramic polymers"; 46th International Congress and Expo on Advanced Ceramics and Composites (ICACC 2022), Online Conference, Daytona Beach; 24.01.2022 - 28.01.2022. Invited talk.
  7. T. Konegger, J. Rauchenecker, J. Rabitsch, M. Schwentenwein: "Lithography-based Ceramic Manufacturing of Aluminum Nitride: Materials System Development"; EUROMAT 2021 Online Conference, Graz; 13.09.2021 - 17.09.2021.
  8. J. Eßmeister, A. Altun, M. Schwentenwein, T. Konegger: "Stereolithography-based additive manufacturing of SiC-filled polymer-derived ceramics"; EUROMAT 2021 Online Conference, Graz; 13.09.2021 - 17.09.2021.
  9. J. Rauchenecker, J. Rabitsch, M. Schwentenwein, T. Konegger:
    Development of AlN powder systems for additive manufacturing by vat photopolymerization;
    96. DKG-Jahrestagung / 96th DKG Annual Meeting, Jülich; 19.04.2021 - 21.04.2021. Invited talk.
  10. J. Eßmeister, A. Altun, M. Schwentenwein, T. Konegger:
    Stereolithography-based additive manufacturing of SiC-filled polymer-derived ceramics;
    AuCerS 2021 - Präsentationswettbewerb und 9. Mitgliederversammlung, Graz; 29.03.2021.
  11. J. Rauchenecker, J. Rabitsch, M. Schwentenwein, T. Konegger:
    3D-printable AlN powder systems with high thermal conductivity;
    AuCerS 2021 - Präsentationswettbewerb und 9. Mitgliederversammlung, Graz; 29.03.2021.
  12. J. Rauchenecker, J. Rabitsch, M. Schwentenwein, T. Konegger:
    Aluminum nitride systems suitable for lithography-based additive manufacturing;
    45th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2021), Daytona Beach, USA; 08.02.2021 - 12.02.2021.
  13. J. Rauchenecker, A.-K. Hofer, J. Rabitsch, M. Schwentenwein, T. Konegger: "Additive manufacturing of aluminum nitride ceramics": AM Ceramics 2020 Virtual Conference; 16.09.2020 – 17.09.2020. Invited talk.
  14. J. Rauchenecker, A.-K. Hofer, D. Brouczek, M. Schwentenwein, T. Konegger: "Aluminum nitride ceramic systems suitable for additive manufacturing: Influence of sintering parameters and sintering environments": AuCerS Workshop "Keramik in Österreich", Graz; 06.02.2020.
  15. T. Konegger, C. Drechsel, H. Peterlik: "Porosity evolution during the pyrolytic conversion of preceramic polysilazane materials"; 44th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2020), Daytona Beach, USA; 26.01.2020 - 31.01.2020. Invited talk.
  16. T. Konegger, R. Obmann, G. Mikl, S. Schörpf, R. Liska: "Freeze casting of porous polysilazane-derived ceramics"; 44th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2020), Daytona Beach; 26.01.2020 - 31.01.2020. Invited talk.
  17. C. Drechsel, H. Peterlik, C. Gierl-Mayer, T. Konegger: "Influence of divinylbenzene on the pore size of polymer-derived SiCN ceramics"; Talk: XVI ECerS Conference 2019, Torino; 16.06.2019 - 20.06.2019.
  18. T. Konegger, G. Mikl, R. Obmann: "Pore tailoring in polymer-derived ceramics prepared by photopolymerization-assisted solidification templating"; Talk: 94th DKG Annual Meeting and Symposium on High Performance Ceramics, Leoben; 05.05.2019 - 09.05.2019.
  19. C. Drechsel, H. Peterlik, C. Gierl-Mayer, T. Konegger: "Tailoring of the microporosity of polymer-derived SiCN ceramics using linker molecules"; Talk: 7. Jahrestagung der Österreichischen Keramischen Gesellschaft (AuCerS) mit Vortragswettbewerb, Leoben; 05.05.2019.
  20. G. Mikl, R. Obmann, S. Schörpf, R. Liska, T. Konegger: "Pore Morphology Tailoring in Polymer-derived Ceramics generated through Photopolymerization-assisted Solidification Templating"; Talk: 7. Jahrestagung der Österreichischen Keramischen Gesellschaft (AuCerS) mit Vortragswettbewerb, Leoben; 05.05.2019.
  21. T. Konegger, R. Obmann, G. Mikl: "Solidification templating of cellular polymer-derived ceramics employing photo-induced click chemistry"; CellMAT 2018, Bad Staffelstein, Germany; 24.10.2018 - 26.10.2018. Invited talk.
  22. T. Konegger, C. Drechsel, T. Prochaska, M. Nebel: "Micro- and macropore tailoring strategies in polysilazane-derived ceramic materials"; ICC7 - 7th International Congress on Ceramics, Foz do Iguacu, Brazil; 17.06.2018 - 21.06.2018. Invited talk.
  23. R. Obmann, T. Konegger: "Porous polymer derived SiCN-ceramic with directional pore structure obtained by freeze casting"; VSS 2018 - Vienna Young Scientists Symposium, Wien; 07.06.2018 - 08.06.2018.
  24. C. Drechsel, M. Nebel, T. Konegger: "Generation and Control of Microporosity in Polymer-derived SiCN Ceramics"; CIMTEC 2018 - 14th International Ceramics Congress, Perugia; 04.06.2018 - 08.06.2018.
  25. T. Konegger, R. Obmann: "Solidification Templating of Porous Polysilazane-derived Ceramics";
    CIMTEC 2018 - 14th International Ceramics Congress, Perugia; 04.06.2018 - 08.06.2018.
  26. T. Konegger, D. Brouczek, T. Prochaska, R. Obmann: "Strategien zur Kontrolle von Makroporosität in konventionellen und polymerabgeleiteten Keramiken"; Talk: DGM-Fachausschusssitzung "Zellulare Werkstoffe", Wien; 07.05.2018 - 08.05.2018.
  27. T. Konegger, D. Brouczek, T. Prochaska: “Pore structure control in silicon nitride membrane supports”; 93. DKG-Jahrestagung und Symposium Hochleistungskeramik, Munich; 10.04.2018 – 13.04.2018. Invited Keynote lecture.
  28. T. Konegger: “Pore tailoring strategies for conventional and polymer-derived ceramic materials"; Seminar talk, Department of Materials Science and Engineering, Clemson University, 02.03.2018. Invited talk.
  29. E.M. Prieto Munoz, R. de Oro Calderon, T. Konegger, E. Gordo Oderiz, C. Gierl-Mayer, H. Danninger, P. Alvaredo Olmos: "Study of sintering behavior of TiAlCrFeMoNi multiprincipal element alloy"; EuroPM 2017, Milano; 01.10.2017 - 04.10.2017.
  30. T. Konegger, C. Drechsel, R. Bordia: "Micro- and mesopore structure control in silicon carbonitride-based ceramics using molecular porogens"; ECerS 2017 - 15th Conference & Exhibition of the European Ceramic Society, Budapest; 09.07.2017 - 13.07.2017.
  31. T. Konegger, R. Bordia, H. Peterlik: "Mikroporöse keramische Strukturen aus Polymerpräkursoren mit molekularen Porogenen"; 21. Symposium Verbundwerkstoffe und Werkstoffverbunde, Bremen; 05.07.2017 - 07.07.2017.
  32. C. Drechsel, R. Haubner, T. Konegger: "A processing routine for layered Si3N4/SiCN structures with graded multiscalar porosity"; VSS 2017 - Vienna Young Scientists Symposium, Wien; 01.06.2017 – 02.06.2017.
  33. T. Prochaska, R. Haubner, T. Konegger: "Porous Si3N4-based support materials with tailored gas permeability"; VSS 2017 - Vienna Young Scientists Symposium, Wien; 01.06.2017 – 02.06.2017.
  34. R. Haubner, M. Lessiak, T. Konegger: “Improving CVD diamond deposition on carbon fibre composites by a surface treatment with polysilazane”; 11th International Conference on New Diamond and Nano Carbons 2017 (NDNC 2017), Cairns, Australia; 28.05.2017 – 01.06.2017.
  35. C. Drechsel, R. Haubner, T. Konegger: "Porous silicon (carbo)nitride layer structures for separation applications"; International Forum - Contest `Topical Issues of Rational Use of Natural Resources´ 2017, St. Petersburg; 19.04.2017 – 21.04.2017. Student Speech Contest – 2nd place.
  36. D. Brouczek, T. Konegger: "Casting of tubular open-porous ceramic structures based on Si3N4"; Mitgliederversammlung der Österreichischen Keramischen Gesellschaft 2017, Graz; 13.02.2017.
  37. C. Drechsel, T. Konegger: "Fabrication of Si3N4/SiCN layer structures with graded multiscalar porosity"; Mitgliederversammlung der Österreichischen Keramischen Gesellschaft 2017, Graz; 13.02.2017. Student Speech Contest – 3rd place.
  38. T. Konegger, C. Drechsel: "Polymer-derived ceramic layer structures with graded multiscalar porosity"; CellMAT 2016, Dresden; 07.12.2016 – 09.12.2016.
  39. T. Konegger, C. Drechsel: "Polymer-precursor-based processing approaches towards layered and bulk ceramic composites"; 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC-9) & Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016), Toronto, Canada; 26.06.2016 – 01.07.2016. Invited talk.
  40. T. Konegger, R. Bordia: "Keramiken mit multiskalarer Porosität über die Polymer-Precursor-Route"; 62. Metallkunde-Kolloquium, Lech am Arlberg; 11.04.2016 – 13.04.2016.
  41. T. Konegger, T. Prochaska, R. Obmann, R. Bordia: "Hollow tube shaped polymer-derived ceramic structures with tailored open-cell porosity"; 91. DKG Jahrestagung & Symposium Hochleistungskeramik 2016, Freiberg; 07.03.2016 – 09.03.2016.
  42. T. Konegger: "Advanced Ceramics, MMCs, and Hard Coatings"; Sino-Austrian Advanced Materials Conference, Shanghai, Shanghai Institute of Ceramics CAS; 22.01.2016.
  43. T. Konegger, R. Bordia: “Poröse, polymerabgeleitete keramische Membranmaterialien mit multiskalarer Porosität für Gastrennanwendungen“; 9th Meeting of the DGM-Topic Group Cellular Materials, Bremen, Germany; 06.10.2015.
  44. T. Konegger, L. Williams, A. Ziebell, R. Bordia: "Planar and tubular porous ceramic support structures derived from preceramic polymers"; 11th Pacific Rim Conference of Ceramic Societies, Jeju, Korea; 30.08.2015 - 04.09.2015.
  45. T. Konegger: "Evaluation of the spatial distribution of the reinforcing phase in particle-reinforced CMCs by a versatile image analysis approach"; 11th Pacific Rim Conference of Ceramic Societies, Jeju, Korea; 30.08.2015 - 04.09.2015.
  46. T. Konegger, C. Tsai, R. Bordia: "Polymerabgeleitete keramische Schichtwerkstoffe mit gradierter Porenstruktur für Gastrennanwendungen"; 20th Symposium on Composites, Vienna, Austria; 01.07.2015 - 03.07.2015.
  47. A. Ziebell, O. Schöppl, R. Haubner, T. Konegger: "Messtechnische Identifizierung von Versagensmechanismen in Prüfstandsversuchen von Hybrid-Wälzlagern"; 20th Symposium on Composites, Vienna, Austria; 01.07.2015 - 03.07.2015.
  48. T. Konegger, C. Tsai, H. Peterlik, S. Creager, R. Bordia: "Asymmetric porous gas-separation membranes based on polymer-derived silicon carbonitride"; 14th International Conference of the European Ceramic Society, Toledo, Spain; 21.06.2015 - 25.06.2015.
  49. T. Konegger: "Polymerabgeleitete Keramiken - Neue Ansätze zur Generierung angepasster Porenstrukturen"; 3rd Meeting of the Austrian Ceramic Society, Vienna, Austria; 10.02.2015. Invited talk.
  50. A. Ziebell, O. Schöppl, R. Haubner, T. Konegger: "Failure prediction in hybrid ball bearings by FFT analysis of vibration data"; 3rd Meeting of the Austrian Ceramic Society, Vienna, Austria; 10.02.2015. Student Speech Contest – 3rd place.
  51. T. Konegger, H. Peterlik, R.K. Bordia: “Micro-, meso-, and macropore tailoring of polysilazane-derived silicon carbonitride ceramics” Materials Science & Technology 2014, Pittsburgh, USA, 12.10.2014-16.10.2014.
  52. T. Konegger, R. Patidar, C.-C. Tsai, R.K. Bordia: “Polymer-derived ceramic support structures for membrane and catalyst applications”; Materials Science & Technology 2014, Pittsburgh, USA, 12.10.2014-16.10.2014.
  53. T. Konegger, B. Achleitner, B. Kohlhauser, D. Brouczek: "Mullite-based cellular ceramics obtained from preceramic polymers"; ECERS XIII - 13th Conference of the European Ceramic Society, Limoges, France; 23.06.2013 - 27.06.2013.
  54. T. Konegger: "Polymer-derived ceramics : New processing approaches and potential applications"; 11th Meeting of the Expert Circle "Sintering", Gemeinschaftsausschuss Pulvermetallurgie, Vienna, Austria; 26.04.2013. Invited talk.
  55. V. Bauer, T. Konegger: "The impact of compounding methods on the properties of polymer-derived ceramic/filler composites"; International Forum - Competition "Topical Issues of Rational Use of Natural Resources", St. Petersburg, Russia; 24.04.2013 - 26.04.2013. Student Speech Contest – 2nd place.
  56. E. Ludwig, P. Schneider, T. Konegger: "Titanium silicide-filled polysilazane-derived ceramic composites"; International Forum - Competition "Topical Issues of Rational Use of Natural Resources", St. Petersburg, Russia; 24.04.2013 - 26.04.2013.
  57. P. Schneider, T. Konegger: "Process parameter optimization and filler surface modification of SiC-filled polysiloxane-derived ceramics"; 1st Meeting of the Austrian Ceramic Society, Leoben, Austria; 07.02.2013.
  58. T. Konegger, P. Schneider, V. Bauer, A. Amsüss, A. Liersch: "Structure and performance of polymer-derived bulk ceramics determined by method of filler incorporation"; 2nd International Conference on Competitive Materials and Technology Processes (ic-cmtp2), Miskolc-Lillafüred, Hungary; 08.10.2012 - 12.10.2012.
  59. T. Konegger, M. Litschauer, A. Liersch: "Influence of filler pre-treatment on processing and properties of polysilazane-based PDCs"; ECerS XII - 12th Conference of the European Ceramic Society, Stockholm, Sweden; 19.06.2011 - 23.06.2011.
  60. T. Konegger, S. Kütäubel, R. Haubner: "Herstellung mikrostrukturierter keramischer Bauteile auf Polysilazan-Basis über die Soft-Lithographie-Technik"; DKG-Meeting 2011, Saarbrücken, Germany; 28.03.2011 - 30.03.2011.
  61. T. Konegger, M. Kappa, A. Liersch, M. Scheffler: "Computer-tomographical assessment of the pore evolution in PDCs"; 8th Pacific Rim Conference on Ceramic and Glass Technology, Vancouver, Canada; 31.05.2009 – 05.06.2009.
  62. T. Konegger, A. Liersch: "Untersuchung der mechanischen Eigenschaften Polysilazan-abgeleiteter Keramiken mit oxidkeramischen Füllstoffen"; Seminar Anorganische Funktionsmaterialien, Brandenburgische Technische Universität Cottbus, Lehrstuhl Leichtbaukeramik; 10-21-2008. Invited talk.

Posterpräsentationen

  1. K. Rauchenwald, J. Eßmeister, V. Bartsch, M. Mayr, T. Konegger: “Photopolymerization-assisted solidificationtemplating of porous polysiloxane-derived ceramics with tailored pore morphology”; CellMat 2022, Dresden, Germany; 12.10.2022 – 14.10.2022.
  2. J. Rauchenecker, T. Konegger: "Investigation of sintering parameters for consolidating aluminum nitride ceramics"; XVI ECerS Conference 2019, Torino; 16.06.2019 - 20.06.2019.
  3. M. Nebel, C. Drechsel, T. Konegger: "Modification of preceramic polymers and investigation of their porosity development"; VSS 2018 - Vienna Young Scientists Symposium, Wien; 07.06.2018 - 08.06.2018.
  4. J. Rauchenecker, T. Konegger: "Coating of tubular silicon nitride support structures with polymer derived ceramic membrane layers"; VSS 2018 - Vienna Young Scientists Symposium, Wien; 07.06.2018 - 08.06.2018.
  5. C. Drechsel, T. Konegger: "Fabrication of Si3N4/SiCN layer structures with graded multiscalar porosity"; ECerS 2017 - 15th Conference & Exhibition of the European Ceramic Society, Budapest; 09.07.2017 - 13.07.2017.
  6. D. Brouczek, T. Konegger: "Tubular open-porous Si3N4-based ceramics obtained by casting methods with defined gas permeability"; CellMAT 2016, Dresden; 07.12.2016 – 09.12.2016.
  7. T. Konegger, T. Prochaska, R. Obmann: "Tubular open-porous polymer-derived ceramic structures with tailored permeability"; 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC-9) & Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016), Toronto, Canada; 26.06.2016 – 01.07.2016. Poster prize – 1st place.
  8. A. Ziebell, J. Ofner, B. Lendl, T. Konegger: ”Localization of phase transformation processes in zirconia-based ceramics by topography-based confocal Raman imaging”; ICAVS 8, Vienna, Austria; 12.07.2015 - 17.07.2015
  9. A. Ziebell, O. Schöppl, R. Haubner, T. Konegger: "Test rig trials of Si3N4 balls in thrust ball bearings"; Vienna Young Scientists Symposium, Wien; 25.06.2015 - 26.06.2015.
  10. T. Konegger, R.K. Bordia: “Polymer-derived ceramics with multiscale porosity for gas separation applications”; Poster: CCOMC Fall Meeting 2014, Anderson, USA, 23.09.2014-24.09.2014. Poster prize – 1st place.
  11. T. Konegger, R.K. Bordia: “Polymer-derived ceramic membranes for gas separation applications”; PostDoc Appreciation Week, Clemson, USA, 15.09.2014 – 19.09.2014.
  12. T. Konegger: "A versatile image analysis routine for the evaluation of the particulate filler distribution in polymer-derived ceramic matrices"; Poster: ECERS XIII - 13th Conference of the European Ceramic Society, Limoges, France; 23.06.2013 - 27.06.2013.
  13. T. Konegger, B. Kohlhauser, C. Gierl, E. Halwax: "Mullitschaumherstellung durch Reaktionspyrolyse präkeramischer Polymere"; DKG-Meeting 2012, Nürnberg, Germany; 05.03.2012 - 07.03.2012.
  14. T. Konegger, E. Halwax, J. Zbiral, A. Limbeck, A. Liersch: "Blue-coloured polymer-derived ceramics? An investigation."; ECerS XII - 12th Conference of the European Ceramic Society, Stockholm, Sweden; 19.06.2011 - 23.06.2011.
  15. S. Kütäubel, T. Konegger, R. Haubner: "Optimization of the slip-casting process for the fabrication of polymer-derived ceramic microparts"; Poster: Junior Scientist Conference 2010, Vienna; 07.04.2010 – 09.04.2010.
  16. T. Konegger, A. Liersch: "Investigation of mechanical properties of polymer-derived Si-C-N/Al2O3-composites with low shrinkage"; Junior Scientist Conference 2008, Vienna; 11-16-2008 - 11-18-2008.
  17. T. Konegger, A. Liersch, R. Felzmann: "Influence Of Oxide Ceramic Fillers On Mechanical Characteristics Of Polysilazane-derived Ceramic Materials"; 2nd International Congress On Ceramics, Verona; 29.06.2008 – 04.07.2008.
  18. C. Edtmaier, T. Janhsen, R. Hula, T. Konegger, H. Wulz, F. Simancik: "Short and Long Carbon Fiber MMCs Using Pre-Coated Fibers"; 1st International Conference on New Materials for Extreme Environments, San Sebastian, Spain; 02.06.2008 – 04.06.2008.
  19. T. Konegger, A. Liersch: "Entwicklung ZrO2-verstärkter Verbundkeramik mit Polysilazan-abgeleiteter Matrix"; Symposium Hochleistungskeramik 2008, Keramik in Wissenschaft und Praxis, Hamburg; 26.02.2008 – 28.02.2008.
  20. S. Strobl, C. Gierl, T. Konegger, M. Kupkova, M. Kabatova: "Microgradient structures of copper-coated and sintered Fe and Cr-Mo-steel powders"; Poster: Int. Conf. "Fractography 2006", Stara Lesna, Slowakei; 15.10.2006 – 18.10.2006.