B Aigner, G Boidi, A Rosenkranz, PG Grützmacher, M Varga, C Gachot (2025). MXene and MXene/MoS₂ Solid Lubricant Coatings in Journal Bearings. ACS Applied Nano Materials, American Chemical Society. https://doi.org/10.1021/acsanm.4c07052, opens an external URL in a new window

C Gachot (2025). Industrial and automotive lubrication. Industrial Lubrication and Tribology 77 (1), 1-1, Emerald Publishing Limited. https://doi.org/10.1108/ILT-01-2025-559, opens an external URL in a new window

PG Grützmacher, A Majed, E Marquis, X Sui, MC Righi, M Sauer, A Foelske, M Naguib, C Gachot (2025). Transition metal carbo chalcogenides: A novel family of 2D solid lubricants. Carbon 231, 119695, Pergamon. Access article, opens an external URL in a new window

L Pisarova, OA Loboda, I Minami, SJ Eder (2025). Breaking Down Polychlorinated Biphenyls and Aryl Chlorides: A Computational Study of Thermal-, Pressure-, and Shear-Induced Decomposition. The Journal of Physical Chemistry A, American Chemical Society. https://doi.org/10.1021/acs.jpca.4c08086, opens an external URL in a new window

D Hua, Q Xia, J Li, Q Zhou, M Xie, S Liu, SJ Eder, H Wang (2025). Atomistic insights into the role of graphene sheets in CoCrNi/graphene composites. Acta Materialia 287, 120809, Pergamon. Access article, opens an external URL in a new window

C Gachot (2024). Special Issue: Lubrication and Tribology Trends in EVs. Industrial Lubrication and Tribology 76 (7/8), 873-873, Emerald Publishing Limited. https://doi.org/10.1108/ILT-10-2024-552, opens an external URL in a new window

SK Peesapati, J Prost, G Vorlaufer, M Varga, C Gachot (2024). Chatter Detection and Identification Based on Mode Decompositions. Available at SSRN 4919639. Access article, opens an external URL in a new window

T MacLucas, PG Grützmacher, P Leonhard-Trautmann, S Suarez, C Gachot, F Mücklich (2024). Combining carbon nanoparticle coatings and laser surface texturing for enhanced lubricity under high loads. Tribology Letters 72 (2), 38, Springer US. https://doi.org/10.1007/s11249-024-01837-5, opens an external URL in a new window

A Marinković, B Stojanović, C Gachot, T Lazović (2024). Analysis of lubrication regimes for porous sliding bearing. Lubricants 12 (6), 184, MDPI. https://doi.org/10.3390/lubricants12060184, opens an external URL in a new window

G Boidi, D Zambrano, S Schwarz, E Marquis, M Varga, MR Ripoll, E Badisch, MC Righi, C Gachot, PG Grützmacher, A Rosenkranz (2024). Solid lubrication performance of hybrid Ti3C2Tx/MoS2 coatings. Carbon 225, 119067, Pergamon. Access article, opens an external URL in a new window

C Yue, Q Dai, X Yang, C Gachot, W Huang, X Wang (2024). Frontispiece 1, Volume 3, Number 2, April 2024. Droplet 3 (2), e130. Access article, opens an external URL in a new window

C Yue, Q Dai, X Yang, C Gachot, W Huang, X Wang (2024). Controllable self‐transport of bouncing droplets on ultraslippery surfaces with wedge‐shaped grooves. Droplet 3 (2), e118. Access article, opens an external URL in a new window

G Boidi, D Zambrano, MI Broens, D Moncada, M Varga, MR Ripoll, E Badisch, N Escalona, PG Grützmacher, C Gachot, A Rosenkranz (2024). Influence of ex-situ annealing on the friction and wear performance of multi-layer Ti3C2Tx coatings. Applied Materials Today 36, 102020, Elsevier. Access article, opens an external URL in a new window

PG Grützmacher, R Neuhauser, K Stagel, K Bica-Schröder, G Boidi, C Gachot, A Rosenkranz (2024). Combining Tailored Ionic Liquids with Ti3C2Tx MXenes for an Enhanced Load‐Carrying Capacity Under Boundary Lubrication. Advanced Engineering Materials 26 (4), 2300721. Access article, opens an external URL in a new window

PG Grützmacher, MC Righi, A Erdemir, C Gachot (2024). In-Operando Formation of Transition Metal Dichalcogenides–Instant Lubrication by Simple Sprinkling of Se Nano-Powder onto Sliding Contact Interfaces. 24th International Colloquium Tribology, 51, expert verlag GmbH. Access article, opens an external URL in a new window

N Dörr, C Gachot, M Marian, K Völkel (2024). 24th International Colloquium Tribology-Industrial an Automotive Lubrication: conference documents 2024., expert verlag. Access article, opens an external URL in a new window

M Michalec, L Daněk, J Foltýn, P Svoboda, C Gachot, M Hartl, I Křupka (2024). Comparative Wear and Friction Analysis of Sliding Surface Materials for Hydrostatic Bearing under Oil Supply Failure Conditions. Advanced Engineering Materials, 2401733. Access article, opens an external URL in a new window

M Vezzelli, MR Ripoll, S Schwarz, A Erdemir, MC Righi, C Gachot (2024). A Different Perspective on the Solid Lubrication Performance of Black Phosphorous: Friend or Foe?. Advanced Engineering Materials, 2401756. Access article, opens an external URL in a new window

AMV Cervellón, M Varga, MR Ripoll, SJ Eder (2024). Resolving high-strain-rate scratch behavior of Ti6Al4V in experiment and meshless simulation. Wear 558, 205554, Elsevier. Access article, opens an external URL in a new window

Y Shi, Q Xia, M Xie, Q Zhou, D Hua, L Chai, T Shi, SJ Eder, H Wang, P Wang, W Liu (2024). Insights into irradiation-affected structural evolution and mechanical behavior of amorphous carbon. Acta Materialia 281, 120424, Pergamon. Access article, opens an external URL in a new window

S Ahmed, SJ Eder, N Dörr, A Martini (2024). Tracking Thermo-Oxidation Reaction Products and Pathways of Modified Lignin Structures from Reactive Molecular Dynamics Simulations. The Journal of Physical Chemistry A 128 (27), 5398-5407, American Chemical Society. Access article, opens an external URL in a new window

HJ Ehrich, A Dollmann, PG Grützmacher, C Gachot, SJ Eder (2024). Automated identification and tracking of deformation twin structures in molecular dynamics simulations. Computational Materials Science 236, 112878, Elsevier. Access article, opens an external URL in a new window

A Dollmann, C Kübel, V Tavakkoli, SJ Eder, M Feuerbacher, T Liening, A Kauffmann, J Rau, C Greiner (2024). Deformation twins as a probe for tribologically induced stress states. Communications Materials 5 (1), 4, Nature Publishing Group UK. https://doi.org/10.1038/s43246-023-00442-8, opens an external URL in a new window

PG Grützmacher, M Cutini, E Marquis, MR Ripoll, H Riedl, P Kutrowatz, S Bug, C Hsu, J Bernardi, C Gachot, A Erdemir, MC Righi (2023). Se Nanopowder Conversion into Lubricious 2D Selenide Layers by Tribochemical Reactions. Advanced Materials 35 (42), 2370300. https://doi.org/10.1002/adma.202370300, opens an external URL in a new window

F Ausserer, I Velkavrh, F Kafexhiu, C Gachot (2023). Integration of a gas pressure chamber on a reciprocal tribometer for experiments at ambient pressures up to 10 bar. Industrial Lubrication and Tribology, Emerald Publishing Limited. https://doi.org/10.1108/ILT-06-2023-0173, opens an external URL in a new window

T Maclucas, L Daut, P Grützmacher, MA Guitar, V Presser, C Gachot, S Suarez, F Mücklich (2023). Influence of structural depth of laser-patterned steel surfaces on the solid lubricity of carbon nanoparticle coatings. Friction 11 (7), 1276-1291, Tsinghua University Press. https://doi.org/10.1007/s40544-022-0664-z, opens an external URL in a new window

MR Ripoll, B Kohlhauser, CI Vladu, C Tomastik, C Gachot (2023). Reactive formation of a few 2D layers of MoS2 using triboactive Mo surfaces and their interaction with anti-wear additives and dispersants. Wear 523, 204756, Elsevier. https://doi.org/10.1016/j.wear.2023.204756, opens an external URL in a new window

M Marian, DF Zambrano, B Rothammer, V Waltenberger, G Boidi, A Krapf, B Merle, J Stampfl, A Rosenkranz, C Gachot, PG Grützmacher (2023). Combining multi-scale surface texturing and DLC coatings for improved tribological performance of 3D printed polymers. Surface and Coatings Technology, 129682, Elsevier. https://doi.org/10.1016/j.surfcoat.2023.129682, opens an external URL in a new window

AAM Faruck, PG Grützmacher, C Hsu, D Dworschak, H Cheng, M Valtiner, K Stagel, P Mikšovsky, AR Sahoo, AS Martinez, K Bica-Schröder, M Weigand, C Gachot (2023). Applying ionic liquids as oil additives for gearboxes: Going beyond the state of the art by bridging the nano-scale and component level. Friction 11 (6), 1057-1078, Tsinghua University Press. https://doi.org/10.1007/s40544-022-0650-5, opens an external URL in a new window

H Torres, K Pichelbauer, S Budnyk, T Schachinger, C Gachot, MR Ripoll (2023). A Ni-Bi self-lubricating Ti6Al4V alloy for high temperature sliding contacts. Journal of Alloys and Compounds 944, 169216, Elsevier. https://doi.org/10.1016/j.jallcom.2023.169216, opens an external URL in a new window

MR Ripoll, H Torres, C Gachot (2023). Microstructural Design of Self-lubricating Metals for Forming Processes and Aerospace Applications Using Laser Metal Deposition. BHM Berg-und Hüttenmännische Monatshefte, 1-5, Springer Vienna. https://doi.org/10.1007/s00501-023-01348-1, opens an external URL in a new window

T MacLucas, P Grützmacher, S Husmann, J Schmauch, S Keskin, S Suarez, V Presser, C Gachot, F Mücklich (2023). Degradation analysis of tribologically loaded carbon nanotubes and carbon onions. npj materials degradation 7 (1), 31, Nature Publishing Group UK. https://doi.org/10.1038/s41529-023-00346-5, opens an external URL in a new window

M Jech, ML Miranda-Medina, T Wopelka, C Tomastik, C Gachot (2023). Effect of Sliding on the Relation of Tribofilm Thickness and Wear. Lubricants 11 (2), 72, MDPI. https://doi.org/10.3390/lubricants11020072, opens an external URL in a new window

A Rudnytskyj, G Vorlaufer, J Leimhofer, M Jech, C Gachot (2023). Estimating the real contact area in lubricated hot rolling of aluminium. Tribology International 180, 108283, Elsevier. https://doi.org/10.1016/j.triboint.2023.108283, opens an external URL in a new window

M Söderfjäll, C Gachot (2023). Friction Reduction by Dimple Type Textured Cylinder Liners—An Experimental Investigation. Materials 16 (2), 665, MDPI. https://doi.org/10.3390/ma16020665, opens an external URL in a new window

I Simonović, A Marinković, C Gachot, P Ljubojević (2023). APPLICATION OF MXENE NANOSHEETS FOR IMPROVING MACHINE ELEMENTS PROPERTIES. 18th International Conference on Tribology-SERBIATRIB ‘23, Kragujevac, Serbia, 17 19 May 2023, 485-491. Access article, opens an external URL in a new window

Y Shi, W Ye, D Hua, Q Zhou, Z Huang, Y Liu, S Li, T Guo, Y Chen, SJ. Eder, H Wang (2023). Interfacial engineering for enhanced mechanical performance: High-entropy alloy/graphene nanocomposites. Materials Today Physics 38, 101220, Elsevier. https://doi.org/10.1016/j.mtphys.2023.101220, opens an external URL in a new window

P Sequard-Base, A Koch, C Müller, SJ Eder, J Sequard-Base (2023). Velocity dependence of barrel friction. Tribology International 189, 108964, Elsevier. https://doi.org/10.1016/j.triboint.2023.108964, opens an external URL in a new window

A Dollmann, C Kuebel, V Tavakolli, SJ Eder, M Feuerbacher, T Liening, A Kauffmann, J Rau, C Greiner (2023). Deformation twins as a probe for tribologically induced stress states. arXiv preprint arXiv:2309.02101. https://doi.org/10.48550/arXiv.2309.02101, opens an external URL in a new window

W Wang, D Hua, Q Zhou, S Li, SJ Eder, J Shi, Z Wang, H Wang, W Liu (2023). Effect of a water film on the material removal behavior of Invar during chemical mechanical polishing. Applied Surface Science 616, 156490, North-Holland. https://doi.org/10.1016/j.apsusc.2023.156490, opens an external URL in a new window

M Varga, AMV Cervellón, S Leroch, SJ Eder, H Rojacz, MR Ripoll (2023). Fundamental abrasive contact at high speeds: scratch testing in experiment and simulation. Wear 522, 204696. https://doi.org/10.1016/j.wear.2023.204696, opens an external URL in a new window

S Leroch, PG Grützmacher, H Heckes, SJ Eder (2023). Towards a multi-abrasive grinding model for the material point method. Frontiers in Manufacturing Technology 3, 1114414, Frontiers. https://doi.org/10.3389/fmtec.2023.1114414, opens an external URL in a new window

Q Yang, SJ Eder, A Martini, PG Grützmacher (2023). Effect of Surface Termination on the Balance between Friction and Failure of Ti3C2Tx MXenes. npj Materials Degradation 7, 6. https://doi.org/10.1038/s41529-023-00326-9, opens an external URL in a new window

S Leroch, SJ Eder, M Varga, MR Ripoll (2023). Material point simulations as a basis for determining Johnson-Cook hardening parameters via instrumented scratch tests. International Journal of Solids and Structures 267, 112146, Elsevier. https://doi.org/10.1016/j.ijsolstr.2023.112146, opens an external URL in a new window

M Chhattal, A Rosenkranz, S Zaki, K Ren, A Ghaffar, Z Gong, PG Grützmacher (2023). Unveiling the tribological potential of MXenes-current understanding and future perspectives. Advances in Colloid and Interface Science, 103021, Elsevier. https://doi.org/10.1016/j.cis.2023.103021, opens an external URL in a new window

P Braun, P Grützmacher, L Frohnapfel, F Mücklich, K Durst (2023). Nanoscale patterning of metallic surfaces with laser patterned tools using a nanoimprinting approach. Applied Surface Science 613, 155786, North-Holland. https://doi.org/10.1016/j.apsusc.2022.155786, opens an external URL in a new window

SJ Eder, PG Grützmacher, MR Ripoll, C Gachot, D Dini (2022). Does speed kill or make friction better?—Designing materials for high velocity sliding. Applied Materials Today 29, 101588, Elsevier. https://doi.org/10.1016/j.apmt.2022.101588, opens an external URL in a new window

A Rudnytskyj, M Varga, S Krenn, G Vorlaufer, J Leimhofer, M Jech, C Gachot (2022). Investigating the relationship of hardness and flow stress in metal forming. International Journal of Mechanical Sciences 232, 107571, Pergamon. https://doi.org/10.1016/j.ijmecsci.2022.107571, opens an external URL in a new window

P Grützmacher, M Schranz, C Hsu, J Bernardi, A Steiger-Thirsfeld, L Hensgen, MR Ripoll, C Gachot (2022). Solid lubricity of WS₂ and Bi₂S₃ coatings deposited by plasma spraying and air spraying. Surface and Coatings Technology 446, Elsevier. Access article, opens an external URL in a new window

PG Gruetzmacher, M Schranz, C Hsu, J Bernardi, A Steiger-Thirsfeld, L Hensgen, MR Ripoll, C Gachot (2022). Phycoerythrobilin/phycourobilin as efficient sensitizers of dye-sensitized solar cell. SURFACE COATINGS TECHNOLOGY 446, ELSEVIER SCIENCE SA. Access article, opens an external URL in a new window

PG Grützmacher, M Schranz, C Hsu, J Bernardi, A Steiger-Thirsfeld, L Hensgen, MR Ripoll, C Gachot (2022). Solid lubricity of WS2 and Bi2S3 coatings deposited by plasma spraying and air spraying. Surface and Coatings Technology 446, 128772, Elsevier. https://doi.org/10.1016/j.surfcoat.2022.128772, opens an external URL in a new window

A Rudnytskyj, R Larsson, C Gachot (2022). A Closer Look at the Contact Conditions of a Block-on-Flat Wear Experiment. Lubricants 10 (7), 131, MDPI. https://doi.org/10.3390/lubricants10070131, opens an external URL in a new window

PG Gruszmacher, S Suarez, A Tolosa, C Gachot, G Song, B Wang, V Presser, F Mucklich, B Anasori, A Rosenkranz (2022). Superior Wear-Resistance of Ti3C2Tx Multi-Layer Coatings (vol 15, pg 8216, 2021). ACS NANO 16 (2), 3433-3433, AMER CHEMICAL SOC. Access article, opens an external URL in a new window

A Rosenkranz, C Gachot, A Erdemir (2022). 2D-layered nanomaterials: Chemical functionalization, advanced characterization, and tribological properties. Frontiers in Chemistry 10, 840213, Frontiers. https://doi.org/10.3389/fchem.2022.840213, opens an external URL in a new window

A Rudnytskyj, M Jech, J Leimhofer, S Krenn, G Vorlaufer, M Varga, C Gachot (2022). Contact and Lubrication Aspects on Predicting the Contact Area in Lubricated Hot Rolling. 23rd International Colloquium Tribology: Industrial and Automotive Lubrication, 415, expert verlag. Access article, opens an external URL in a new window

PG Grützmacher, S Suarez, A Tolosa, C Gachot, G Song, B Wang, V Presser, F Mücklich, B Anasori, A Rosenkranz (2022). Correction to Superior Wear-Resistance of Ti₃C₂T_<i>x</i> Multi-Layer Coatings. ACS nano 16 (2), 3433-3433, American Chemical Society. https://doi.org/10.1021/acsnano.2c00535, opens an external URL in a new window

A Rudnytskyj, R Larsson, C Gachot (2022). A Closer Look at the Contact Conditions of a Block-on-Flat Wear Experiment. Lubricants 2022, 10, 131. Access article, opens an external URL in a new window

K Mohammadtabar, SJ Eder, N Dörr, A Martini (2022). Shear-Driven Reactions of Organosulfur Compounds on Ferrous Surfaces: A Molecular Dynamics Study. Tribology International 176, 107922. https://doi.org/10.1016/j.triboint.2022.107922, opens an external URL in a new window

W Wang, D Hua, D Luo, Q Zhou, SJ Eder, S Li, Z Wang, H Wang (2022). Exploring the nano-polishing mechanisms of Invar. Tribology International 175, 107840. https://doi.org/10.1016/j.triboint.2022.107840, opens an external URL in a new window

A Dollmann, A Kauffmann, M Heilmaier, AS Tirunilai, LS Mantha, C Kübel, SJ Eder, J Schneider, C Greiner (2022). Dislocation-mediated and twinning-induced plasticity of CoCrFeMnNi in varying tribological loading scenarios. Journal of Materials Science 57, 17448–17461, Springer. https://doi.org/10.1007/s10853-022-07661-3, opens an external URL in a new window

J Prost, G Boidi, M Varga, G Vorlaufer, SJ Eder (2022). Lifetime assessment of porous journal bearings using joint time-frequency analysis of real-time sensor data. Tribology International 169, 107488, Elsevier. https://doi.org/10.1016/j.triboint.2022.107488, opens an external URL in a new window

SJ Eder, PG Grützmacher, T Spenger, H Heckes, H Rojacz, A Nevosad, F Haas (2022). Experimentally validated atomistic simulation of the effect of relevant grinding parameters on work piece topography, internal stresses, and microstructure. Friction 10 (4), 608-629, Tsinghua University Press. https://doi.org/10.1007/s40544-021-0523-3, opens an external URL in a new window

JYA Hurtado, PG Grützmacher, JM Henríquez, D Zambrano, B Wang, A Rosenkranz (2022). Solid Lubrication Performance of Few‐ and Multilayer Ti3C2Tx Coatings. Advanced Engineering Materials 24 (10), 2200755. Access article, opens an external URL in a new window

AM Jastrzębska, PG Grützmacher, A Rosenkranz (2022). Novel MXenes—Advanced Synthesis and Tailored Material-Property Design., 325-355, Springer International Publishing. Access article, opens an external URL in a new window

SM Lößlein, F Mücklich, PG Grützmacher (2022). Topography versus chemistry–How can we control surface wetting?. Journal of Colloid and Interface Science 609, 645-656, Academic Press. https://doi.org/10.1016/j.jcis.2021.11.071, opens an external URL in a new window

K Holmberg, A Laukkanen, T Hakala, H Ronkainen, T Suhonen, M Wolski, P Podsiadlo, T Woloszynski, G Stachowiak, C Gachot, L Li (2021). Topography orientation effects on friction and wear in sliding DLC and steel contacts, part 3: Experiments under dry and lubricated conditions. Wear 486, 204093, Elsevier. https://doi.org/10.1016/j.wear.2021.204093, opens an external URL in a new window

SP Murzin, VB Balyakin, C Gachot, SA Fomchenkov, MV Blokhin, NL Kazanskiy (2021). Ultraviolet nanosecond laser treatment to reduce the friction coefficient of silicon carbide ceramics. Applied Sciences 11 (24), 11906, MDPI. https://doi.org/10.3390/app112411906, opens an external URL in a new window

C Hsu, A Stratmann, S Medina, G Jacobs, F Mücklich, C Gachot (2021). Does laser surface texturing really have a negative impact on the fatigue lifetime of mechanical components?. Friction 9, 1766-1775, Tsinghua University Press. https://doi.org/10.1007/s40544-021-0508-2, opens an external URL in a new window

G Boidi, PG Grützmacher, M Varga, MRd Silva, C Gachot, D Dini, FJ Profito, IF Machado (2021). Tribological performance of random sinter pores vs. deterministic laser surface textures: An experimental and machine learning approach., IntechOpen. Access article, opens an external URL in a new window

M Srbulovic, K Gkagkas, C Gachot, A Vernes (2021). Statistics of Sliding on Periodic and Atomically Flat Surfaces. Frontiers in Mechanical Engineering 7, 742684, Frontiers Media SA. https://doi.org/10.3389/fmech.2021.742684, opens an external URL in a new window

G Boidi, PG Grützmacher, A Kadiric, FJ Profito, IF Machado, C Gachot, D Dini (2021). Fast laser surface texturing of spherical samples to improve the frictional performance of elasto-hydrodynamic lubricated contacts. Friction 9, 1227-1241, Tsinghua University Press. https://doi.org/10.1007/s40544-020-0462-4, opens an external URL in a new window

SP Murzin, VB Balyakin, C Gachot, SA Fomchenkov, MV Blokhin, NL Kazanskiy (2021). Reduction of the friction coefficient of silicon carbide ceramics by ultraviolet nanosecond laser treatment. 2021 International Conference on Information Technology and Nanotechnology (ITNT), 1-5, IEEE. https://doi.org/10.1109/ITNT52450.2021.9649435, opens an external URL in a new window

S Mushtaq, MF Wani, C Gachot, MN Bhat (2021). Self-Lubricating Iron-Based Metal Matrix Composites., 41-51, CRC Press. Access article, opens an external URL in a new window

PG Grutzmacher, S Suarez, A Tolosa, C Gachot, G Song, B Wang, V Presser, F Mücklich, B Anasori, A Rosenkranz (2021). Superior Wear-Resistance of Ti3C2Tx Multilayer Coatings. ACS nano 15 (5), 8216-8224, American Chemical Society. Access article, opens an external URL in a new window

A Rudnytskyj, S Krenn, G Vorlaufer, C Gachot (2021). Influence of the 6061 aluminium alloy thermo-viscoplastic behaviour on the load-area relation of a contact. Materials 14 (6), 1352, MDPI. https://doi.org/10.3390/ma14061352, opens an external URL in a new window

B Kohlhauser, CI Vladu, C Gachot, PH Mayrhofer, MR Ripoll (2021). Reactive in-situ formation and self-assembly of MoS2 nanoflakes in carbon tribofilms for low friction. Materials Design 199, 109427, Elsevier. https://doi.org/10.1016/j.matdes.2020.109427, opens an external URL in a new window

PG Grützmacher, SV Jalikop, C Gachot, A Rosenkranz (2021). Thermocapillary lubricant migration on textured surfaces-a review of theoretical and experimental insights. Surface Topography: Metrology and Properties 9 (1), 013001, IOP Publishing. Access article, opens an external URL in a new window

SJ Eder, PG Grützmacher, MR Ripoll, JF Belak (2021). Elucidating the onset of plasticity in sliding contacts using differential computational orientation tomography. Tribology Letters 69 (3), 79, Springer US. https://doi.org/10.1007/s11249-021-01451-9, opens an external URL in a new window

M Varga, S Leroch, T Gross, H Rojacz, SJ Eder, M Grillenberger, MR Ripoll (2021). Scratching aluminium alloys–Modelling and experimental assessment of damage as function of the strain rate. Wear 476, 203670, Elsevier. https://doi.org/10.1016/j.wear.2021.203670, opens an external URL in a new window

SV Jalikop, B Scheichl, SJ Eder, S Hönig (2021). A New Computational Fluid Dynamics Model To Optimize Sucker Rod Pump Operation and Design. SPE Production &amp; Operations 36 (02), 359-367, OnePetro. https://dx.doi.org/10.2118/201285-PA, opens an external URL in a new window

SJ Eder, S Leroch, PG Grützmacher, T Spenger, H Heckes (2021). A multiscale simulation approach to grinding ferrous surfaces for process optimization. International Journal of Mechanical Sciences 194, 106186, Pergamon. https://doi.org/10.1016/j.ijmecsci.2020.106186, opens an external URL in a new window

J Xu, T Luo, X Chen, P Grützmacher, A Rosenkranz, J Luo (2021). Influence of structural evolution on sliding interface for enhancing tribological performance of onion-like carbon films via thermal annealing. Applied Surface Science 541, 148441, North-Holland. https://doi.org/10.1016/j.apsusc.2020.148441, opens an external URL in a new window

A Rosenkranz, PG Grützmacher, K Murzyn, C Mathieu, F Mücklich (2021). Multi-scale surface patterning to tune friction under mixed lubricated conditions. Applied Nanoscience 11, 751-762, Springer International Publishing. https://doi.org/10.1007/s13204-019-01055-9, opens an external URL in a new window

A. Rodriguez, M.S. Jaman, O. Acikgoz, B. Wang, J. Yu, P.G. Grützmacher, A. Rosenkranz, M.Z. Baykara (2021). The potential of Ti3C2TX nano-sheets (MXenes) for nanoscale solid lubrication revealed by friction force microscopy. Applied Surface Science 535, 147664, Elsevier. https://doi.org/10.1016/j.apsusc.2020.147664, opens an external URL in a new window

SJ Eder, PG Grützmacher, MR Ripoll, D Dini, C Gachot (2020). Effect of temperature on the deformation behavior of copper nickel alloys under sliding. Materials 14 (1), 60, MDPI. https://doi.org/10.3390/ma14010060, opens an external URL in a new window

AAM Faruck, C Hsu, N Doerr, M Weigand, C Gachot (2020). How lubricant formulations and properties influence the performance of rotorcraft transmissions under loss of lubrication conditions. Tribology International 151, 106390, Elsevier. https://doi.org/10.1016/j.triboint.2020.106390, opens an external URL in a new window

SJ Eder, MR Ripoll, U Cihak-Bayr, D Dini, C Gachot (2020). MD Simulations of FCC Alloys under Dry Sliding Yield a Mechanism Map for Near-Surface Microstructural Development. Tribologie und Schmierungstechnik 67 (4), 38, Narr Francke Attempto Verlag GmbH+ Co. KG. Access article, opens an external URL in a new window

P Grützmacher, C Gachot, SJ Eder (2020). Visualization of microstructural mechanisms in nanocrystalline ferrite during grinding. Materials Design 195, 109053, Elsevier. https://doi.org/10.1016/j.matdes.2020.109053, opens an external URL in a new window

SJ Eder, MR Ripoll, U Cihak-Bayr, D Dini, C Gachot (2020). Unraveling and mapping the mechanisms for near-surface microstructure evolution in CuNi alloys under sliding. ACS applied materials interfaces 12 (28), 32197-32208, American Chemical Society. Access article, opens an external URL in a new window

A Rudnytskyj, P Simon, M Jech, C Gachot (2020). Constitutive modelling of the 6061 aluminium alloy under hot rolling conditions and large strain ranges. Materials Design 190, 108568, Elsevier. https://doi.org/10.1016/j.matdes.2020.108568, opens an external URL in a new window

B Kohlhauser, MR Ripoll, H Riedl, CM Koller, N Koutna, A Amsüss, H Hutter, G Ramirez, C Gachot, A Erdemir, PH Mayrhofer (2020). How to get noWear?–A new take on the design of in-situ formed high performing low-friction tribofilms. Materials Design 190, 108519, Elsevier. https://doi.org/10.1016/j.matdes.2020.108519, opens an external URL in a new window

C Hsu, J Barrirero, R Merz, A Stratmann, H Aboulfadl, G Jacobs, M Kopnarski, F Mücklich, C Gachot (2020). Revealing the interface nature of ZDDP tribofilm by X-ray photoelectron spectroscopy and atom probe tomography. Industrial Lubrication and Tribology 72 (7), 923-930, Emerald Publishing Limited. https://doi.org/10.1108/ILT-01-2020-0035, opens an external URL in a new window

S Fecske, K Gkagkas, C Gachot, A Vernes (2020). Interdependence of amplitude roughness parameters on rough Gaussian surfaces. Tribology Letters 68, 1-15, Springer US. https://doi.org/10.1007/s11249-020-1282-4, opens an external URL in a new window

SJ Eder, PG Grützmacher, MR Ripoll, D Dini, C Gachot (2020). Effect of Temperature on the Deformation Behavior of Copper Nickel Alloys under Sliding. Materials 2021, 14, 60., s Note: MDPI stays neu-tral with regard to jurisdictional claims in published maps and institutional affiliations.. Access article, opens an external URL in a new window

SV Jalikop, B Scheichl, C Gachot (2020). Fundamentals of Directional Spreading of Lubricants over Multi-Scale Textured Surfaces.. Access article, opens an external URL in a new window

G Boidi, S Krenn, SJ Eder (2020). Identification of a material–lubricant pairing and operating conditions that lead to the failure of porous journal bearing systems. Tribology Letters 68, 1-14, Springer US. https://doi.org/10.1007/s11249-020-01347-0, opens an external URL in a new window

T Spenger, F Haas, J Pichler, M Weinzerl, SJ Eder, M Weiß (2020). RPM-Synchronous Grinding: An Innovative and Efficient Manufacturing Method for the Production of Non-Circular Workpieces. ASME International Mechanical Engineering Congress and Exposition 84485, V02AT02A010, American Society of Mechanical Engineers. https://dx.doi.org/10.1115/IMECE2020-23859, opens an external URL in a new window

SV Jalikop, B Scheichl, SJ Eder, S Hönig (2020). Computational fluid dynamics model to improve sucker rod pump operating mode. SPE Annual Technical Conference and Exhibition, D022S061R038, SPE. https://dx.doi.org/10.2118/201285-MS, opens an external URL in a new window

CD Ielchici, S Krenn, SJ Eder (2020). A tribometer and methodology for wear and friction testing of porous journal bearings at elevated temperatures. Industrial Lubrication and Tribology 72 (8), 1027-1031, Emerald Publishing Limited. https://doi.org/10.1108/ILT-08-2019-0351, opens an external URL in a new window

A Martini, SJ Eder, N Dörr (2020). Tribochemistry: a review of reactive molecular dynamics simulations. Lubricants 8 (4), 44, MDPI. https://doi.org/10.3390/lubricants8040044, opens an external URL in a new window

DM Fox, W Cho, L Dubrulle, PG Grützmacher, M Zammarano (2020). Intumescent polydopamine coatings for fire protection. Green Materials 8 (3), 162-171, Thomas Telford Ltd. https://doi.org/10.1680/jgrma.19.00065, opens an external URL in a new window

F König, A Rosenkranz, PG Grützmacher, F Mücklich, G Jacobs (2020). Effect of single-and multi-scale surface patterns on the frictional performance of journal bearings–a numerical study. Tribology International 143, 106041, Elsevier. https://doi.org/10.1016/j.triboint.2019.106041, opens an external URL in a new window

DW Müller, T Fox, PG Grützmacher, S Suarez, F Mücklich (2020). Applying ultrashort pulsed direct laser interference patterning for functional surfaces. Scientific reports 10 (1), 3647, Nature Publishing Group UK. https://doi.org/10.1038/s41598-020-60592-4, opens an external URL in a new window

H Raghuram, C Katsich, K Pichelbauer, K Koschatzky, C Gachot, U Cihak-Bayr (2019). Design of wear and corrosion resistant FeNi-graphite composites by laser cladding. Surface and Coatings Technology 377, 124897, Elsevier. https://doi.org/10.1016/j.surfcoat.2019.124897, opens an external URL in a new window

S Fang, S Klein, C Hsu, L Llanes, C Gachot, D Bähre (2019). Fabrication and tribological performance of a laser-textured hardmetal guiding stone for honing processes. International Journal of Refractory Metals and Hard Materials 84, 105034, Elsevier. https://doi.org/10.1016/j.ijrmhm.2019.105034, opens an external URL in a new window

PG Grützmacher, A Rosenkranz, A Szurdak, M Grüber, C Gachot, G Hirt, F Mücklich (2019). Multi-scale surface patterning–an approach to control friction and lubricant migration in lubricated systems. Industrial Lubrication and Tribology 71 (8), 1007-1016, Emerald Publishing Limited. https://doi.org/10.1108/ILT-07-2018-0273, opens an external URL in a new window

A Rosenkranz, PG Grützmacher, C Gachot, HL Costa (2019). Surface texturing in machine elements− a critical discussion for rolling and sliding contacts. Advanced Engineering Materials 21 (8), 1900194. Access article, opens an external URL in a new window

A Rosenkranz, HL Costa, F Profito, C Gachot, S Medina, D Dini (2019). Influence of surface texturing on hydrodynamic friction in plane converging bearings-An experimental and numerical approach. Tribology International 134, 190-204, Elsevier. https://doi.org/10.1016/j.triboint.2019.01.042, opens an external URL in a new window

B Kohlhauser, MR Ripoll, H Riedl, CM Koller, N Koutná, G Ramirez, A Erdemir, C Gachot, PH Mayrhofer (2019). On the In-situ Formation of Transition Metal Disulphides in Lubricated WN or WC Coating Contacts.. Access article, opens an external URL in a new window

SV Jalikop, B Scheichl, S Hönig, SJ Eder (2019). Simulation-aided identification of mid-cycle valve closure in a down-hole pump. Journal of Fluids and Structures 91, 102774, Academic Press. https://doi.org/10.1016/j.jfluidstructs.2019.102774, opens an external URL in a new window

K Mohammadtabar, SJ Eder, N Dörr, A Martini (2019). Heat-, Load-, and Shear-Driven Reactions of Di-<i>tert</i>-butyl Disulfide on Fe(100). The Journal of Physical Chemistry C 123 (32), 19688-19692, American Chemical Society. Access article, opens an external URL in a new window

E Badisch, M Varga, SJ Eder (2019). A brief review of abrasive wear modelling using a numerical-experimental approach. Key Engineering Materials 799, 83-88, Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.799.83, opens an external URL in a new window

M Varga, S Leroch, SJ Eder, H Rojacz, MR Ripoll (2019). Influence of velocity on high-temperature fundamental abrasive contact: A numerical and experimental approach. Wear 426, 370-377, Elsevier. https://doi.org/10.1016/j.wear.2018.12.013, opens an external URL in a new window

C Katsich, U Cihak-Bayr, S Hönig, SJ. Eder (2019). From test rig to down-hole pump: Ranking material pairings for ball valves according to their impact wear resistance. Tribologie und Schmierungstechnik 66 (2), 14-18, expert. Access article, opens an external URL in a new window

SJ Eder, D Bianchi, IA Neacşu, G Vorlaufer (2019). An experimental and signal analysis workflow for detecting cold-induced noise emissions (cold squealing) from porous journal bearings. Mechanical Systems and Signal Processing 115, 60-69, Academic Press. https://doi.org/10.1016/j.ymssp.2018.05.047, opens an external URL in a new window

SV Jalikop, B Scheichl, SJ Eder (2019). Fluid-Structure Interaction of Coupled Valves in Sucker Rod Pump. Access article, opens an external URL in a new window

T Spenger, F Haas, U Cihak-Bayr, SJ Eder, M Weiß, M Weinzerl, M Schneider (2019). RPM-SYNCHRONOUS GRINDING-Investigation and comparison of surface topography of synchro-finish manufactured workpieces. Procedia CIRP 81, 476-481, Elsevier. https://doi.org/10.1016/j.procir.2019.03.122, opens an external URL in a new window

M Zammarano, D Fox, P Grützmacher, R Davis (2019). Flame retardant coatings. Access article, opens an external URL in a new window

PG Grützmacher, S Rammacher, D Rathmann, C Motz, F Mücklich, S Suarez (2019). Interplay between microstructural evolution and tribo-chemistry during dry sliding of metals. Friction 7, 637-650, Tsinghua University Press. https://doi.org/10.1007/s40544-019-0259-5, opens an external URL in a new window

A Rosenkranz, PG Grützmacher, R Espinoza, VM Fuenzalida, E Blanco, N Escalona, FJ Gracia, R Villarroel, L Guo, R Kang, F Muecklich, S Suarez, Z Zhang (2019). Multi-layer Ti3C2Tx-nanoparticles (MXenes) as solid lubricants–Role of surface terminations and intercalated water. Applied Surface Science 494, 13-21, North-Holland. https://doi.org/10.1016/j.apsusc.2019.07.171, opens an external URL in a new window

PG Grützmacher, FJ Profito, A Rosenkranz (2019). Multi-scale surface texturing in tribology—Current knowledge and future perspectives. Lubricants 7 (11), 95, MDPI. https://doi.org/10.3390/lubricants7110095, opens an external URL in a new window

M Marian, P Grützmacher, A Rosenkranz, S Tremmel, F Mücklich, S Wartzack (2019). Designing surface textures for EHL point-contacts-Transient 3D simulations, meta-modeling and experimental validation. Tribology International 137, 152-163, Elsevier. https://doi.org/10.1016/j.triboint.2019.03.052, opens an external URL in a new window

J Xu, X Chen, P Grützmacher, A Rosenkranz, J Li, J Jin, C Zhang, J Luo (2019). Tribochemical behaviors of onion-like carbon films as high-performance solid lubricants with variable interfacial nanostructures. ACS Applied Materials Interfaces 11 (28), 25535-25546, American Chemical Society. Access article, opens an external URL in a new window

P Grützmacher (2019). Controlling friction by multi-scale surface patterning inside and outside the contact zone. Saarländische Universitäts-und Landesbibliothek. http://dx.doi.org/10.22028/D291-29724, opens an external URL in a new window

PG Grützmacher, A Rosenkranz, E Atalay, A Szurdak, C Gachot, G Hirt, F Mücklich (2018). Guiding lubricant on stainless steel surfaces by channel-like structures fabricated by roller-and micro-coining. Physica A: Statistical Mechanics and Its Applications 505, 482-489, North-Holland. https://doi.org/10.1016/j.physa.2018.03.035, opens an external URL in a new window

H Torres, T Vuchkov, S Slawik, C Gachot, B Prakash, MR Ripoll (2018). Self-lubricating laser claddings for reducing friction and wear from room temperature to 600 C. Wear 408, 22-33, Elsevier. https://doi.org/10.1016/j.wear.2018.05.001, opens an external URL in a new window

H Kasem, O Stav, P Grützmacher, C Gachot (2018). Effect of low depth surface texturing on friction reduction in lubricated sliding contact. Lubricants 6 (3), 62, MDPI. https://doi.org/10.3390/lubricants6030062, opens an external URL in a new window

PG Grützmacher, A Rosenkranz, A Szurdak, C Gachot, G Hirt, F Mücklich (2018). Lubricant migration on stainless steel induced by bio-inspired multi-scale surface patterns. Materials Design 150, 55-63, Elsevier. https://doi.org/10.1016/j.matdes.2018.04.035, opens an external URL in a new window

SJ Eder, U Cihak-Bayr, C Gachot, MR Ripoll (2018). Interfacial microstructure evolution due to strain path changes in sliding contacts. ACS applied materials interfaces 10 (28), 24288-24301, American Chemical Society. Access article, opens an external URL in a new window

C Gachot, P Grützmacher, A Rosenkranz (2018). Laser surface texturing of TiAl multilayer films—Effects of microstructure and topography on friction and wear. Lubricants 6 (2), 36, MDPI. https://doi.org/10.3390/lubricants6020036, opens an external URL in a new window

M Linz, MR Ripoll, C Pauly, J Bernardi, A Steiger‐Thirsfeld, F Franek, F Mücklich, C Gachot (2018). Heterogeneous Strain Distribution and Saturation of Geometrically Necessary Dislocations in a Ferritic–Pearlitic Steel during Lubricated Sliding. Advanced Engineering Materials 20 (4), 1700810. Access article, opens an external URL in a new window

H Torres, S Slawik, C Gachot, B Prakash, MR Ripoll (2018). Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications. Surface and Coatings Technology 337, 24-34, Elsevier. https://doi.org/10.1016/j.surfcoat.2017.12.060, opens an external URL in a new window

L Guo, P Wong, C Gachot (2018). Facilitating the study of the texturing effect on hydrodynamic lubrication. Lubricants 6 (1), 18, MDPI. https://doi.org/10.3390/lubricants6010018, opens an external URL in a new window

C Gachot (2018). Novel Laser-based Coating for Forming Processes.. Access article, opens an external URL in a new window

C Gachot (2018). The importance of lubricants in machine elements.. Access article, opens an external URL in a new window

C Gachot (2018). Integrated Tribo-Design, Faculty of Mechanical Engineering.. Access article, opens an external URL in a new window

B Kohlhauser, H Riedl, MR Rodríguez, C Gachot, PH Mayrhofer (2018). In-situ solid lubricant formation on W or Mo based carbide and nitride coatings in lubricated tribo contacts.. Access article, opens an external URL in a new window

PG Grützmacher, A Rosenkranz, A Szurdak, C Gachot, G Hirt, F Mücklich (2018). Effects of multi‐scale patterning on the run‐in behavior of steel–alumina pairings under lubricated conditions. Advanced Engineering Materials 20 (1), 1700521. Access article, opens an external URL in a new window

S Leroch, SJ Eder, G Ganzenmüller, LJS Murillo, MR Ripoll (2018). Development and validation of a meshless 3D material point method for simulating the micro-milling process. Journal of Materials Processing Technology 262, 449-458, Elsevier. https://doi.org/10.1016/j.jmatprotec.2018.07.013, opens an external URL in a new window

K Mohammadtabar, SJ Eder, PO Bedolla, N Dörr, A Martini (2018). Reactive Molecular Dynamics Simulations of Thermal Film Growth from Di-tert-butyl Disulfide on an Fe(100) surface. Langmuir 34 (51), 15681-15688, American Chemical Society. Access article, opens an external URL in a new window

M. Hoy, B. Kometer, P. Bürßner, G. Puscalau, S. Eder (2018). SRP Equipment Customization Creating Value by Increasing Run Life in a Low Oil Price Environment. SPE Artificial Lift Conference and Exhibition, SPE-190958-MS, Society of Petroleum Engineers. https://dx.doi.org/10.2118/190958-MS, opens an external URL in a new window

SJ Eder, C Ielchici, S Krenn, D Brandtner (2018). An experimental framework for determining wear in porous journal bearings operated in the mixed lubrication regime. Tribology International 123, 1-9, Elsevier. https://doi.org/10.1016/j.triboint.2018.02.026, opens an external URL in a new window

PO Bedolla, G Vorlaufer, C Rechberger, D Bianchi, SJ Eder, R Polak, A Pauschitz (2018). Combined experimental and numerical simulation of abrasive wear and its application to a tillage machine component. Tribology International 127, 122, Elsevier. https://doi.org/10.1016/j.triboint.2018.03.019, opens an external URL in a new window

PG Grützmacher, A Rosenkranz, A Szurdak, F König, G Jacobs, G Hirt, F Mücklich (2018). From lab to application-Improved frictional performance of journal bearings induced by single-and multi-scale surface patterns. Tribology International 127, 500-508, Elsevier. https://doi.org/10.1016/j.triboint.2018.06.036, opens an external URL in a new window

C Schäfer, L Reinert, T MacLucas, P Grützmacher, R Merz, F Mücklich, S Suarez (2018). Influence of surface design on the solid lubricity of carbon nanotubes-coated steel surfaces. Tribology Letters 66, 1-15, Springer US. https://doi.org/10.1007/s11249-018-1044-8, opens an external URL in a new window

A Rosenkranz, A Szurdak, PG Grützmacher, G Hirt, F Mücklich (2018). Friction reduction induced by elliptical surface patterns under lubricated conditions. Advanced Engineering Materials 20 (3), 1700731. Access article, opens an external URL in a new window

PG Grützmacher, A Rosenkranz, S Rammacher, C Gachot, F Mücklich (2017). The influence of centrifugal forces on friction and wear in rotational sliding. Tribology International 116, 256-263, Elsevier. https://doi.org/10.1016/j.triboint.2017.07.021, opens an external URL in a new window

A Rosenkranz, SA Khan, A Szurdak, G Hirt, C Gachot (2017). Wear behavior of micro-coined steel surfaces under mixed lubrication. Industrial Lubrication and Tribology 69 (6), 1033-1039, Emerald Publishing Limited. https://doi.org/10.1108/ILT-11-2015-0167, opens an external URL in a new window

M Wolski, P Podsiadlo, GW Stachowiak, K Holmberg, A Laukkanen, H Ronkainen, M Gee, J Nunn, C Gachot, L Li (2017). Multiscale characterisation of 3D surface topography of DLC coated and uncoated surfaces by directional blanket covering (DBC) method. Wear 388, 47-56, Elsevier. https://doi.org/10.1016/j.wear.2017.03.021, opens an external URL in a new window

A Laukkanen, K Holmberg, H Ronkainen, G Stachowiak, P Podsiadlo, M Wolski, M Gee, C Gachot, L Li (2017). Topographical orientation effects on surface stresses influencing on wear in sliding DLC contacts, Part 2: Modelling and simulations. Wear 388, 18-28, Elsevier. https://doi.org/10.1016/j.wear.2017.03.026, opens an external URL in a new window

S Fang, L Llanes, S Klein, C Gachot, A Rosenkranz, D Bähre, F Mücklich (2017). Frictional performance assessment of cemented carbide surfaces textured by laser. IOP conference series: materials science and engineering 258 (1), 012006, IOP Publishing. Access article, opens an external URL in a new window

C Hsu, A Stratmann, A Rosenkranz, C Gachot (2017). Enhanced growth of ZDDP-based tribofilms on laser-interference patterned cylinder roller bearings. Lubricants 5 (4), 39, MDPI. https://doi.org/10.3390/lubricants5040039, opens an external URL in a new window

A Stratmann, G Jacobs, C Hsu, C Gachot, G Burghardt (2017). Antiwear tribofilm growth in rolling bearings under boundary lubrication conditions. Tribology International 113, 43-49, Elsevier. https://doi.org/10.1016/j.triboint.2017.03.030, opens an external URL in a new window

MR Ripoll, M Linz, C Gachot (2017). Transient softening in lubricated sliding contacts due to strain path changes. Wear 376, 1728-1738, Elsevier. https://doi.org/10.1016/j.wear.2016.12.051, opens an external URL in a new window

M Linz, MR Ripoll, C Gachot, C Pauly, F Franek, F Muecklich (2017). On the competition between plastic deformation and material detachment in ferritic/pearlitic steel under boundary lubrication. Wear 376, 813-821, Elsevier. https://doi.org/10.1016/j.wear.2017.01.095, opens an external URL in a new window

AF Lasagni, C Gachot, KE Trinh, M Hans, A Rosenkranz, T Roch, S Eckhardt, T Kunze, M Bieda, D Günther, V Lang, F Mücklich (2017). Direct laser interference patterning, 20 years of development: From the basics to industrial applications. Laser-based micro-and nanoprocessing XI 10092, 186-196, SPIE. https://doi.org/10.1117/12.2252595, opens an external URL in a new window

L Reinert, F Lasserre, C Gachot, P Grützmacher, T MacLucas, N Souza, F Mücklich, S Suarez (2017). Long-lasting solid lubrication by CNT-coated patterned surfaces. Scientific reports 7 (1), 42873, Nature Publishing Group UK. https://doi.org/10.1038/srep42873, opens an external URL in a new window

C Gachot, A Rosenkranz, SM Hsu, HL Costa (2017). A critical assessment of surface texturing for friction and wear improvement. Wear 372, 21-41, Elsevier. https://doi.org/10.1016/j.wear.2016.11.020, opens an external URL in a new window

C Gachot, MFB Abdollah (2017). 50 years of Tribology-sustainable manufacturing., Emerald Publishing Limited. Access article, opens an external URL in a new window

C Gachot (2017). Direct Laser Interference Patterning-Pros and Cons in Tribology.. Access article, opens an external URL in a new window

B Kohlhauser, MR Rodríguez, H Riedl, C Gachot, PH Mayrhofer (2017). Interaction of EP additives with W or Mo based carbide and nitride coatings and their in-situ related formation of a low friction tribofilm... Access article, opens an external URL in a new window

B Kohlhauser, MR Rodríguez, H Riedl, C Gachot, G Ramirez, A Erdemir, PH Mayrhofer (2017). Generation of a low friction tribofilm on Mo-and W-containing surfaces and coatings.. Access article, opens an external URL in a new window

C Gachot (2017). A critical assessment of surface texturing for friction and wear improvement-Quo Vadis?.. Access article, opens an external URL in a new window

C Gachot (2017). Chemische Reaktionen an der Oberfläche? Die Welt der Tribo-Schichten.. Access article, opens an external URL in a new window

C Gachot (2017). Maßgeschneiderte Materialoberflächen und deren Potenzial in der Tribologie. Antriebstechnisches Kolloquium 2017. Access article, opens an external URL in a new window

AF Lasagni, D Günther, V Lang, F Mücklich, C Gachot, KE Trinh, M Hans, A Rosenkranz, T Roch, S Eckhardt, T Kunze, M Bieda (2017). Direct laser interference patterning, 20 years of development.. Access article, opens an external URL in a new window

SJ Eder, U Cihak-Bayr, D Bianchi (2017). Large-scale molecular dynamics simulations of nanomachining. Advanced machining processes: Innovative modeling techniques 141, CRC Press. Access article, opens an external URL in a new window

H Winkelmann, H Rojacz, SJ Eder, M Varga, S Nugent (2017). Influence of Momentum and Energy on Materials: An Experimental and Molecular Dynamics Approach for Impact Phenomena. steel research international 88 (10), 1600445. https://doi.org/10.1002/srin.201600445, opens an external URL in a new window

M Varga, S Leroch, SJ Eder, MR Ripoll (2017). Meshless microscale simulation of wear mechanisms in scratch testing. Wear 376, 1122-1129, Elsevier. https://doi.org/10.1016/j.wear.2016.11.023, opens an external URL in a new window

SJ Eder, U Cihak-Bayr, D Bianchi, G Feldbauer, G Betz (2017). Thermostat Influence on the Structural Development and Material Removal during Abrasion of Nanocrystalline Ferrite. ACS Applied Materials Interfaces 9 (15), 13713-13725, American Chemical Society. Access article, opens an external URL in a new window

SJ Eder, D Bianchi, U Cihak-Bayr, K Gkagkas (2017). Methods for atomistic abrasion simulations of laterally periodic polycrystalline substrates with fractal surfaces. Computer Physics Communications 212, 100-112, North-Holland. https://doi.org/10.1016/j.cpc.2016.10.017, opens an external URL in a new window

S Bettscheider, PG Grützmacher, A Rosenkranz (2017). Low friction and high solid-solid contact ratio—A contradiction for laser-patterned surfaces?. Lubricants 5 (3), 35, MDPI. https://doi.org/10.3390/lubricants5030035, opens an external URL in a new window

M Zammarano, D Fox, P Grützmacher, R Davis (2017). Flame retardant coatings.. Access article, opens an external URL in a new window

A Torge, P Grützmacher, F Mücklich, M Schneider (2017). The influence of mannitol on morphology and disintegration of spray-dried nano-embedded microparticles. European Journal of Pharmaceutical Sciences 104, 171-179, Elsevier. https://doi.org/10.1016/j.ejps.2017.04.003, opens an external URL in a new window

A Rosenkranz, JC Pangraz, C Gachot, F Mücklich (2016). Load-dependent run-in and wear behaviour of line-like surface patterns produced by direct laser interference patterning. Wear 368, 350-357, Elsevier. https://doi.org/10.1016/j.wear.2016.10.008, opens an external URL in a new window

S Bettscheider, C Gachot, A Rosenkranz (2016). How to measure the real contact area? A simple marker and relocation foot-printing approach. Tribology International 103, 167-175, Elsevier. https://doi.org/10.1016/j.triboint.2016.06.034, opens an external URL in a new window

C Zeitz, T Faidt, S Grandthyll, H Hähl, N Thewes, C Spengler, J Schmauch, MJ Deckarm, C Gachot, H Natter, M Hannig, F Müller, K Jacobs (2016). Synthesis of hydroxyapatite substrates: bridging the gap between model surfaces and enamel. ACS Applied Materials Interfaces 8 (39), 25848-25855, American Chemical Society. Access article, opens an external URL in a new window

A Rosenkranz, PG Gruetzmacher, A Szurdak, C Gachot, G Hirt, F Muecklich (2016). Synergetic effect of laser patterning and micro coining for controlled lubricant propagation. Surface Topography: Metrology and Properties 4 (3), 034008, IOP Publishing. Access article, opens an external URL in a new window

A Rosenkranz, C Gachot, E Ramos-Moore, F Mücklich (2016). Laser interference patterning of steel surfaces-influence on the frictional performance under dry and lubricated sliding conditions. Tribology Online 11 (5), 575-582, Japanese Society of Tribologists. https://doi.org/10.2474/trol.11.575, opens an external URL in a new window

C Gachot, C Hsu, S Suárez, P Grützmacher, A Rosenkranz, A Stratmann, G Jacobs (2016). Microstructural and chemical characterization of the tribolayer formation in highly loaded cylindrical roller thrust bearings. Lubricants 4 (2), 19, MDPI. https://doi.org/10.3390/lubricants4020019, opens an external URL in a new window

PG Grützmacher, A Rosenkranz, C Gachot (2016). How to guide lubricants–Tailored laser surface patterns on stainless steel. Applied Surface Science 370, 59-66, North-Holland. https://doi.org/10.1016/j.apsusc.2016.02.115, opens an external URL in a new window

A Rosenkranz, A Stratmann, C Gachot, G Burghardt, G Jacobs, F Mücklich (2016). Improved Wear Behavior of Cylindrical Roller Thrust Bearings by Three‐Beam Laser Interference. Advanced Engineering Materials 18 (5), 854-862. Access article, opens an external URL in a new window

C Gachot, A Rosenkranz, R Buchheit, N Souza, F Mücklich (2016). Tailored frictional properties by Penrose inspired surfaces produced by direct laser interference patterning. Applied Surface Science 367, 174-180, North-Holland. https://doi.org/10.1016/j.apsusc.2016.01.169, opens an external URL in a new window

A Rosenkranz, A Szurdak, C Gachot, G Hirt, F Muecklich (2016). Friction reduction under mixed and full film EHL induced by hot micro-coined surface patterns. Tribology International 95, 290-297, Elsevier. https://doi.org/10.1016/j.triboint.2015.11.035, opens an external URL in a new window

A Rosenkranz, M Hans, C Gachot, A Thome, S Bonk, F Mücklich (2016). Direct laser interference patterning: Tailoring of contact area for frictional and antibacterial properties. Lubricants 4 (1), 2, MDPI. https://doi.org/10.3390/lubricants4010002, opens an external URL in a new window

S Fang, T Herrmann, A Rosenkranz, C Gachot, FG Marro, F Mücklich, L Llanes, D Bähre (2016). Tribological performance of laser patterned cemented tungsten carbide parts. Procedia CIRP 42, 439-443, Elsevier. https://doi.org/10.1016/j.procir.2016.02.228, opens an external URL in a new window

IA Neacşu, B Scheichl, G Vorlaufer, SJ Eder, F Franek, L Ramonat (2016). Experimental validation of the simulated steady-state behavior of porous journal bearings. Journal of Tribology 138 (3), 031703. https://dx.doi.org/10.1115/1.4032659, opens an external URL in a new window

M Wolloch, SJ Eder, A Vernes (2016). Load-dependent real contact area at nanoscale. 611. WE-Heraeus-Seminar: Mechanisms of Tribology. Access article, opens an external URL in a new window

SJ Eder, U Cihak-Bayr, D Bianchi (2016). Single-asperity contributions to multi-asperity wear simulated with molecular dynamics. IOP Conference Series: Materials Science and Engineering 119 (1), 012009, IOP Publishing. Access article, opens an external URL in a new window

S Leroch, M Varga, SJ Eder, A Vernes, MR Ripoll, G Ganzenmüller (2016). Smooth particle hydrodynamics simulation of damage induced by a spherical indenter scratching a viscoplastic material. International Journal of Solids and Structures 81, 188-202, Pergamon. https://doi.org/10.1016/j.ijsolstr.2015.11.025, opens an external URL in a new window

IA Neacșu, G Vorlaufer, SJ Eder, B Scheichl, F Franek (2016). On the Steady-State Behaviour of Porous Journal Bearings-Bridging the Gap between Simulation and Experiments. Book of Abstracts, 2, University of Leeds. Access article, opens an external URL in a new window

A Rosenkranz, S Fleischmann, C Gachot, F Mücklich (2015). Anisotropic Spreading Behavior of PAO Oil on Laser‐Patterned Stainless Steel Surfaces. Advanced Engineering Materials 17 (11), 1645-1651. Access article, opens an external URL in a new window

A Rosenkranz, S Jaeger, C Gachot, S Vogel, F Mücklich (2015). Wear Behavior of Laser‐Patterned Piston Rings in Squeeze Film Dampers. Advanced Engineering Materials 17 (8), 1208-1214. Access article, opens an external URL in a new window

A Rosenkranz, L Reinert, C Gachot, H Aboufadl, S Grandthyll, K Jacobs, F Müller, F Mücklich (2015). Oxide formation, morphology, and nanohardness of laser‐patterned steel surfaces. Advanced Engineering Materials 17 (8), 1234-1242. Access article, opens an external URL in a new window

A Rosenkranz, T Heib, C Gachot, F Mücklich (2015). Oil film lifetime and wear particle analysis of laser-patterned stainless steel surfaces. Wear 334, 1-12, Elsevier. https://doi.org/10.1016/j.wear.2015.04.006, opens an external URL in a new window

K Holmberg, A Laukkanen, H Ronkainen, R Waudby, G Stachowiak, M Wolski, P Podsiadlo, M Gee, J Nunn, C Gachot, L Li (2015). Topographical orientation effects on friction and wear in sliding DLC and steel contacts, part 1: Experimental. Wear 330, 3-22, Elsevier. https://doi.org/10.1016/j.wear.2015.02.014, opens an external URL in a new window

SJ Eder, U Cihak-Bayr, A Vernes, G Betz (2015). Evolution of topography and material removal during nanoscale grinding. Journal of Physics D: Applied Physics 48 (46), 465308, IOP Publishing. Access article, opens an external URL in a new window

SJ Eder, G Feldbauer, D Bianchi, U Cihak-Bayr, G Betz, A Vernes (2015). Applicability of macroscopic wear and friction laws on the atomic length scale. Physical Review Letters 115 (2), 025502, American Physical Society. https://doi.org/10.1103/PhysRevLett.115.025502, opens an external URL in a new window

SJ Eder, U Cihak-Bayr, A Pauschitz (2015). Nanotribological simulations of multi-grit polishing and grinding. Wear 340, 25-30, Elsevier. https://doi.org/10.1016/j.wear.2015.03.006, opens an external URL in a new window

SJ Eder, U Cihak-Bayr, A Pauschitz (2015). Grinding and Polishing on the Nanometric Scale Using Hard Abrasives–An Atomistic Numerical Study. Ecotrib 2015, 75. Access article, opens an external URL in a new window

A Rosenkranz, B Martin, S Bettscheider, C Gachot, H Kliem, F Mücklich (2014). Correlation between solid–solid contact ratios and lubrication regimes measured by a refined electrical resistivity circuit. Wear 320, 51-61, Elsevier. https://doi.org/10.1016/j.wear.2014.08.018, opens an external URL in a new window

A Rosenkranz, L Reinert, C Gachot, F Mücklich (2014). Alignment and wear debris effects between laser-patterned steel surfaces under dry sliding conditions. Wear 318 (1-2), 49-61, Elsevier. https://doi.org/10.1016/j.wear.2014.06.016, opens an external URL in a new window

F Walzhofer, M Linz, A Steiger-Thirsfeld, J Bernardi, E Badisch, H Winkelmann, C Gachot (2014). Characterization of frictional stressed white etching layers out of cutting tools by means of transmission electron microscopy (TEM). Practical Metallography 51 (7), 485-498, De Gruyter. https://doi.org/10.3139/147.110300, opens an external URL in a new window

A Szurdak, A Rosenkranz, C Gachot, G Hirt, F Mücklich (2014). Manufacturing and tribological investigation of hot micro-coined lubrication pockets. Key Engineering Materials 611, 417-424, Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.611-612.417, opens an external URL in a new window

S Slawik, P Leibenguth, D Rathmann, C Gachot, F MOcklich (2014). Microstructural analysis of shot and laser shock peened grey iron for increased fatigue strength. International Conference on Shot Peening (ICSP 12), 232-235. Access article, opens an external URL in a new window

S Suarez, A Rosenkranz, C Gachot, F Mücklich (2014). Enhanced tribological properties of MWCNT/Ni bulk composites–Influence of processing on friction and wear behaviour. Carbon 66, 164-171, Pergamon. https://doi.org/10.1016/j.carbon.2013.08.054, opens an external URL in a new window

PO Bedolla, G Feldbauer, M Wolloch, C Gruber, SJ Eder, N Dörr, P Mohn, J Redinger, A Vernes (2014). Density Functional Investigation of the Adsorption of Isooctane, Ethanol, and Acetic Acid on a Water-Covered Fe (100) Surface. The Journal of Physical Chemistry C 118, 21428-21437, American Chemical Society. Access article, opens an external URL in a new window

SJ Eder, D Bianchi, U Cihak-Bayr, A Vernes, G Betz (2014). An analysis method for atomistic abrasion simulations featuring rough surfaces and multiple abrasive particles. Computer Physics Communications 185, 2456-2466, North-Holland. https://doi.org/10.1016/j.cpc.2014.05.018, opens an external URL in a new window

PO Bedolla, G Feldbauer, M Wolloch, SJ Eder, N Dörr, P Mohn, J Redinger, A Vernes (2014). Effects of van der Waals Interactions in the Adsorption of Isooctane and Ethanol on Fe (100) Surfaces. The Journal of Physical Chemistry C 118, 17608-17615, ACS Publications. Access article, opens an external URL in a new window

S Eder, A Vernes, P Fotiu, G Betz (2014). Atomistic Simulation of a Cu Nanowire Tensile Test. MaTri’14, 2nd Austrian-Indian-Symposium on Materials Science and Tribology, Wiener Neustadt (A). Access article, opens an external URL in a new window

SJ Eder, U Cihak-Bayr, D Bianchi, A Vernes, G Betz (2014). A Molecular Dynamics Study of Polishing and Grinding. LAMMPS User Symposium, Trieste (I). Access article, opens an external URL in a new window

C Pirghie, AC Pirghie, S Eder, F Franek (2014). Effect of steady shear and loading pressure on thin PFPE-Z lubricant films in molecular dynamics simulations. Journal of the Balkan Tribological Association 20 (2), 291-299. Access article, opens an external URL in a new window

S Eder, A Vernes, G Betz (2014). Methods and numerical aspects of nanoscopic contact area estimation in atomistic tribological simulations. Computer Physics Communications 185 (1), 217-228, North-Holland. https://doi.org/10.1016/j.cpc.2013.09.021, opens an external URL in a new window

C Gachot, A Rosenkranz, B Wietbrock, G Hirt, F Muecklich (2013). Advanced Design of Hierarchical Topographies in Metallic Surfaces by Combining Micro‐Coining and Laser Interference Patterning. Advanced Engineering Materials 15 (6), 503-509, WILEY‐VCH Verlag. Access article, opens an external URL in a new window

B Raillard, J Rémond, E Ramos‐Moore, N Souza, C Gachot, F Mücklich (2013). Wetting properties of steel surfaces modified by laser interference metallurgy. Advanced Engineering Materials 15 (5), 341-346, WILEY‐VCH Verlag. Access article, opens an external URL in a new window

N Prodanov, C Gachot, A Rosenkranz, F Mücklich, MH Müser (2013). Contact mechanics of laser-textured surfaces: Correlating contact area and friction. Tribology letters 50, 41-48, Springer US. https://doi.org/10.1007/s11249-012-0064-z, opens an external URL in a new window

C Gachot, A Rosenkranz, L Reinert, E Ramos-Moore, N Souza, MH Müser, F Mücklich (2013). Dry friction between laser-patterned surfaces: role of alignment, structural wavelength and surface chemistry. Tribology letters 49, 193-202, Springer US. https://doi.org/10.1007/s11249-012-0057-y, opens an external URL in a new window

SJ Eder, A Vernes, G Betz (2013). On the Derjaguin offset in boundary-lubricated nanotribological systems. Langmuir 29 (45), 13760-13772, American Chemical Society. Access article, opens an external URL in a new window

PB Velazquez, S Eder, N Dörr, A Vernes (2013). Ab initio adsorption of organic additives on an iron surface. 40th Leeds-Lyon Symposium on Tribology Tribochemistry Forum 2013. Access article, opens an external URL in a new window

S Eder, A Vernes, G Vorlaufer, G Betz (2013). De-mystifying the Load-independent Derjaguin-offset in Various Boundary-Lubricated Nanosystems. World Tribology Congress 2013—WTC V, Torino (I) (ISBN: 978-88-908185-0-9), ID 1065. Access article, opens an external URL in a new window

C Pirghie, A Pirghie, S Eder, F Franek (2013). PFPE-Z lubricant thin films in molecular dynamics simulations-shear thinning and friction law. Optoelectronics And Advanced Materials-Rapid Communications 7 (5-6), 434-438. Access article, opens an external URL in a new window

B Raillard, C Gachot, M Hans, P Leibenguth, F Muecklich (2012). Microstructural characterization of laser-irradiated bulk copper under dry sliding conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226 (6), 541-551, SAGE Publications. https://doi.org/10.1177/1350650112440924, opens an external URL in a new window

D Wibbing, J Binder, W Schinköthe, C Pauly, C Gachot, F Mücklich (2012). SensMiLi: Absolutes Wegmess-System aus einer diffraktiven q-nären Pseudo-Zufalls-Sequenz. 79 (1), 44-51, Oldenbourg Wissenschaftsverlag GmbH. https://doi.org/10.1524/teme.2012.0180, opens an external URL in a new window

D Wibbing, J Binder, W Schinkoethe, C Pauly, C Gachot, F Muecklich (2012). SensMiLi: Absolute Position Encoder by a Diffractive q-ary Pseudo-Random-Sequence. TM. TECHNISCHES MESSEN 79 (1), 44-51. Access article, opens an external URL in a new window

C Gachot (2012). Laser interference metallurgy of metallic surfaces for tribological applications.. http://dx.doi.org/10.22028/D291-22840, opens an external URL in a new window

S Eder (2012). Multiscale Computational Tribology. 3rd Austrian High Performance Computing Workshop, St. Pölten (A). Access article, opens an external URL in a new window

LL López-de-la-Torre, S Eder, A Vernes (2012). First-principles study of the deposition of organic molecules on an iron surface. ECCOMAS 2012, Wien (A), 208. Access article, opens an external URL in a new window

A Vernes, S Eder, G Vorlaufer, G Betz (2012). On the three-term kinetic friction law in nanotribological systems. Faraday Discussions 156, 173, The Royal Society of Chemistry. https://doi.org/10.1039/C2FD00120A, opens an external URL in a new window

S Eder (2012). Molecular dynamics evidence of a three-term kinetic friction law for mixed- and boundary-lubricated nanotribological systems.. Access article, opens an external URL in a new window

D Wibbing, J Binder, W Schinköthe, C Pauly, C Gachot, F Mücklich (2011). SensMiLi: Optical absolute position-encoder by single-track, Q-ary pseudo-random-sequences for miniature linear motors. Proceedings of 10th International Conference on Optical Technologies for Sensing and Measurement (Sensor+ Test Conferences 2011), Nürnberg, 16-21. Access article, opens an external URL in a new window

A Neacşu, B Scheichl, S Eder, G Vorlaufer (2011). CAVITATION IN POROUS JOURNAL BEARINGS LUBRICATED WITH IONIC LIQUIDS. ECOTRIB 2011—3rd European Conference on Tribology, Vienna (A) (ISBN: 978-3-901657-38-2), 681–686. Access article, opens an external URL in a new window

S Eder, A Vernes, G Vorlaufer, G Betz (2011). Mapping Atomistic Mixed Lubrication to Continuum via a Smooth Particle Approach. International Nanotribology Forum, The Hoi An Discussions II, Hoi An, (Vietnam). Access article, opens an external URL in a new window

S Eder, A Vernes, G Vorlaufer, G Betz (2011). Molecular dynamics simulations of mixed lubrication with smooth particle post-processing. Journal of Physics: Condensed Matter 23 (17), 175004, IOP Publishing. Access article, opens an external URL in a new window

E Detemple, P Leibenguth, C Gachot, F Mücklich (2010). Large-area patterned formation of intermetallic phases on Ti/Al multilayer systems by laser interference metallurgy. Thin Solid Films 519 (2), 736-741, Elsevier. https://doi.org/10.1016/j.tsf.2010.08.142, opens an external URL in a new window

C Gachot (2010). How to tailor surfaces?. Access article, opens an external URL in a new window

S Eder, G Vorlaufer, A Vernes, G Betz (2010). Identification and Analysis of Friction Regimes due to the Failure of Thin Lubricant Films. Theoretical Modeling and Experimental Simulation in Tribology, Cargese, (F), 57. Access article, opens an external URL in a new window

S Eder, S Ilincic, G Vorlaufer (2010). Numerical Modelling of Lubricated Frictional Tribocontacts on the Micro-and Nanoscale. 17th International Colloquium Tribology—TAE, Ostfildern (D), 10. Access article, opens an external URL in a new window

G Vorlaufer, M Jech, J Boehm, S Eder (2010). Spatially resolved measurement of sub-micrometre change in surface topography using confocal white light microscopy and image registration techniques. SPIE Photonics Europe Conference, Brussels, 7718-7719. Access article, opens an external URL in a new window

M Hans, C Gachot, F Müller, F Mücklich (2009). Direct laser interference structuring as a tool to gradually tune the wetting response of titanium and polyimide surfaces. Advanced Engineering Materials 11 (10), 795-800, WILEY‐VCH Verlag. Access article, opens an external URL in a new window

C Gachot, P Leibenguth, F Mücklich (2009). Tribological properties of laser interference induced microstructural architectures in metallic systems. Friction, wear and wear protection, 59-66, Wiley‐VCH Verlag GmbH Co. KGaA. Access article, opens an external URL in a new window

R Catrin, C Gachot, G Marchand, U Schmid, F Mücklich (2009). Selective wet chemical etching of metallic thin films designed by laser interference metallurgy (LIMET). Smart Sensors, Actuators, and MEMS IV 7362, 351-356, SPIE. https://doi.org/10.1117/12.821333, opens an external URL in a new window

C Gachot, M Hans, R Catrin, U Schmid, F Mücklich (2009). Tuned wettability of material surfaces for tribological applications in miniaturized systems by laser interference metallurgy. Smart Sensors, Actuators, and MEMS IV 7362, 242-250, SPIE. https://doi.org/10.1117/12.821661, opens an external URL in a new window

C Gachot, R Catrin, A Lasagni, U Schmid, F Mücklich (2009). Comparative study of grain sizes and orientation in microstructured Au, Pt and W thin films designed by laser interference metallurgy. Applied Surface Science 255 (10), 5626-5632, North-Holland. https://doi.org/10.1016/j.apsusc.2008.10.032, opens an external URL in a new window

M Hans, C Gachot, R Catrin, B Raillard, F Mucklich (2009). Laser-Interferenzstrukturierung zur Funktionalisierung von Kupferwerkstoffen. Metall 63 (11), 579. Access article, opens an external URL in a new window

S Eder, G Vorlaufer, F Franek, G Betz (2009). Molecular Dynamics Simulations of the Tribological Performance of Model Lubricant Additives. World Tribology Congress 2009—WTC IV, Kyoto (J) (ISBN: 978-4-9900139-9-8), 623. Access article, opens an external URL in a new window

S Eder, G Vorlaufer, G Betz (2009). Molecular Dynamics Simulations of Boundary Lubricant Failure. Advances in Boundary Lubrication and Boundary Surface Films, Sevilla (E). Access article, opens an external URL in a new window

S Ilincic, S Eder, G Vorlaufer, A Vernes, N Tungkunagorn (2009). Modelling load and friction in rough tribocontacts using boundary elements and molecular dynamics., na. Access article, opens an external URL in a new window

S Eder, G Vorlaufer, A Pauschitz, G Betz (2009). Detailed Study of Additivated Nanotribological Contacts Using Molecular Dynamics Simulations. 36th Leeds-Lyon Symposium on Tribology, Lyon (F) 36 (IV), iii. Access article, opens an external URL in a new window

R Catrin, AF Lasagni, C Gachot, U Schmid, F Muecklich (2008). Microstructural design of advanced architectures in titanium/platinum thin films by laser interference metallurgy. Advanced Engineering Materials 10 (5), 466-470, WILEY‐VCH Verlag. Access article, opens an external URL in a new window

RCAFRIN, AFLASAGNI, CGACHOT, USCHMIDAND, FMÜCKLICH (2008). Microstructural Design of Advanced Architectures in Titanium/Platinum Thin Films by Laser Interference Metallurgy. Advanced engineering materials (Print) 10 (5). Access article, opens an external URL in a new window

S Eder, G Vorlaufer, G Betz (2008). Computational Nanotribology of Lubricated Model Friction Contacts. 35th Leeds-Lyon Symposium on Tribology, Leeds (UK), XXIV (iii). Access article, opens an external URL in a new window

A Koblischka-Veneva, C Gachot, P Leibenguth, F Mücklich (2007). Investigation of microstructure of bulk Ni2MnGa alloy by means of electron backscatter diffraction analysis. Journal of Magnetism and Magnetic Materials 316 (2), e431-e434, North-Holland. https://doi.org/10.1016/j.jmmm.2007.02.171, opens an external URL in a new window

F Muecklich, C Gachot, R Catrin, U Schmid, A Lasagni (2007). Macroscopic 2D design of micro/nano grain architectures by laser interference metallurgy. MRS Online Proceedings Library (OPL) 1059, Cambridge University Press. https://doi.org/10.1557/PROC-1059-KK04-06, opens an external URL in a new window

D Suess, S Eder, J Lee, R Dittrich, J Fidler, JW Harrell, T Schrefl, G Hrkac, M Schabes, N Supper, A Berger (2007). Reliability of Sharrocks equation for exchange spring bilayers. Physical Review B 75 (17), 174430, American Physical Society. https://doi.org/10.1103/PhysRevB.75.174430, opens an external URL in a new window

S Eder, G Vorlaufer, S Ilincic, G Betz (2007). Simulation of wear processes using molecular dynamics (MD) simulations. Proceedings of the ÖTG Symposium, St. Pölten (A), 105-112, ÖTG. Access article, opens an external URL in a new window

KW Liu, C Gachot, P Leibenguth, F Mücklich (2005). Combinatorial experiment in Ni–Ti thin films by laser interference structuring. Applied surface science 247 (1-4), 550-555, North-Holland. https://doi.org/10.1016/j.apsusc.2005.01.123, opens an external URL in a new window