Cong, B., Yoo, H. W., Pechgraber, D., & Schitter, G. (2025). High-Speed and High-Resolution Polygon Mirror-Based Industrial Stereolithography With Advanced Active Error Compensation. IEEE-ASME TRANSACTIONS ON MECHATRONICS, 1–10. https://doi.org/10.1109/TMECH.2025.3527648

Binder, S., Chalupa-Gantner, F., Yoo, H. W., Zandrini, T., & Ovsianikov, A. (2025). Two-photon polymerization system based on a resonant scanner for high-throughput production of tissue engineering microscaffolds. Additive Manufacturing, 97, Article 104601. https://doi.org/10.1016/j.addma.2024.104601

Pechgraber, D., Csencsics, E., & Schitter, G. (2025). Observer-Based Disturbance Suppression in a 3-DoF Positioning System for High-Precision 3D Inline Metrology. In 2025 IEEE International Conference on Mechatronics (ICM) (pp. 1–6). https://doi.org/10.1109/ICM62621.2025.10934889

Pechhacker, A., Csencsics, E., & Schitter, G. (2025). Enhanced Energy Efficiency of Hybrid Reluctance Actuators by Bias Flux Adaptation. In 2025 IEEE International Conference on Mechatronics (ICM) (pp. 1–6). https://doi.org/10.1109/ICM62621.2025.10934938

Pechhacker, A., Csencsics, E. K., & Schitter, G. (2024). Decreasing the non-linearity of hybrid reluctance actuators by air gap design. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 91, 255–262. https://doi.org/10.1016/j.precisioneng.2024.09.018

Rufin, M., Nalbach, M., Rakuš, M., Fuchs, M., Poik, M., Schitter, G., Thurner, P. J., & Andriotis, O. G. (2024). Methylglyoxal alters collagen fibril nanostiffness and surface potential. Acta Biomaterialia, 189, 208–216. https://doi.org/10.1016/j.actbio.2024.08.039

Kern, T., Laimer, M., Schitter, G., & Csencsics, E. (2024). Laser triangulation measurements on moving samples with reduced lateral feature uncertainty. IEEE Transactions on Instrumentation and Measurement, 1–1. https://doi.org/10.1109/TIM.2024.3480193

Pechgraber, D., Wiesböck, J., Csencsics, E. K., & Schitter, G. (2024). Switched Amplifier-Driven Nanopositioning: Integrating System Modeling and Control Tuning. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/TIE.2024.3429628

Nalbach, M., Fuchs, M., Motoi, N., Rufin, M., Andriotis, O., Schitter, G., & Thurner, P. J. (2024). Mechanical behavior of individual collagen fibrils in force-controlled mechanical tests. In EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference : Program & Book of Abstracts (pp. 88–88).

Cong, B., Yoo, H. W., Pechgraber, D., & Schitter, G. (2024). Cross-scan Error Evaluation of Large Size Polygon Mirror Based Laser Scanning System for Industrial 3D Printing. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 290–295). https://doi.org/10.1109/AIM55361.2024.10636950

Friedl, B., Pechhacker, A., Csencsics, E. K., & Schitter, G. (2024). Design and Control of a Table-top Vibration Isolation System With Zero-power Gravity Compensation. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 835–840). https://doi.org/10.1109/AIM55361.2024.10637066

Laimer, M., Wertjanz, D., Gsellmann, P., Schitter, G., & Csencsics, E. (2024). High-Precision 3-D Measurements on Moving Objects. IEEE-ASME TRANSACTIONS ON MECHATRONICS. https://doi.org/10.1109/TMECH.2024.3435999

Brunner, D., Yoo, H. W., & Schitter, G. (2024). Precise Synchronization Control of Parametrically Driven Resonant MEMS Mirrors for Lissajous Scanning with a Fixed Frequency Ratio. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 467–473). IEEE. https://doi.org/10.1109/AIM55361.2024.10636949

Ojdanic, D., Paternoster, N., Naverschnigg, C., Sinn, A., & Schitter, G. (2024). Evaluation of the required optical resolution for deep learning-based long-range UAV detection. In Dr. M. Alam & V. Asari (Eds.), Proceedings Volume 13040, Pattern Recognition and Prediction XXXV (p. 14). https://doi.org/10.1117/12.3013251

Nonay, J. R., Rüddenklau, R., Sinn, A., Jakobs, J. P., Berlitz, J., Rödiger, B., & Schitter, G. (2024). Horizontal free-space optical link with CubeISL over 143 km. JOURNAL OF OPTICAL COMMUNICATIONS AND NETWORKING, 16(5), 593–601. https://doi.org/10.1364/JOCN.518271

Thurner, P., Nalbach, M., Fuchs, M., Andriotis, O., Carriero, A., & Schitter, G. (2024, March 4). Micro- and Nanomechanics of Collagen-rich Tissues and Individual Fibrils. TMS 2024 – 153rd Annual Meeting & Exhibition, Orlando, United States of America (the).

Hackl, T., Poik, M., & Schitter, G. (2024). Single-Harmonic Response Open-Loop Kelvin-Probe Force Microscopy. IEEE Transactions on Instrumentation and Measurement, 73, 1–7. https://doi.org/10.1109/TIM.2024.3366573

Poik, M., Hackl, T., Di Martino, S., Berger, B. M., Sattler, S. W., & Schitter, G. (2024). A contactless method for measuring amplitude and phase of RF voltages up to 26.5GHz. IEEE Sensors Journal. https://doi.org/10.1109/JSEN.2024.3354322

Hager, S., Csencsics, E., Yoo, H. W., & Schitter, G. (2024). Reducing the uncertainty of laser straightness measurements via local saturation of imaging sensors. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 1567–1572). https://doi.org/10.1109/AIM55361.2024.10637144

Haider, C., Csencsics, E., & Schitter, G. (2024). Analyzing the dynamic performance of hybrid reluctance actuators for feedback control. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 657–662). https://doi.org/10.1109/AIM55361.2024.10637221

Haider, C., Csencsics, E., & Schitter, G. (2024). Frequency-dependency of force dynamics in hybrid reluctance actuators. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 663–667). https://doi.org/10.1109/AIM55361.2024.10637132

Laimer, M., Wertjanz, D., Gsellmann, P., Schitter, G., & Csencsics, E. (2024). Enabling feedback position control of an industrial robot based on external sensor signals for dual-stage actuation. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 1252–1257). https://doi.org/10.1109/AIM55361.2024.10637010

Nalbach, M., Fuchs, M., Motoi, N., Rufin, M., Andriotis, O., Schitter, G., & Thurner, P. (2024). Mechanical behavior of individual collagen fibrils in force-controlled mechanical test. In EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference : Program & Book of Abstracts (pp. 88–88).

Naverschnigg, C., Ojdanic, D., Sinn, A., & Schitter, G. (2024). Analysis and Control of a Robotic Telescope System for High-Speed Small-UAV Tracking. IEEE Aerospace and Electronic Systems Magazine, 1–10. https://doi.org/10.1109/MAES.2024.3515894

Ojdanic, D., Naverschnigg, C., Sinn, A., & Schitter, G. (2024). Algorithm evaluation for parallel detection and tracking of UAVs. In P. Schelkens & T. Kozacki (Eds.), Optics, Photonics, and Digital Technologies for Imaging Applications VIII. https://doi.org/10.1117/12.3017037

Ojdanic, D., Naverschnigg, C., Sinn, A., Zelinskyi, D., & Schitter, G. (2024). Parallel Architecture for Low Latency UAV Detection and Tracking Using Robotic Telescopes. IEEE Transactions on Aerospace and Electronic Systems. https://doi.org/10.1109/TAES.2024.3396418

Ojdanić, D., Zelinskyi, D., Naverschnigg, C., Sinn, A., & Schitter, G. (2024). High-speed telescope autofocus for UAV detection and tracking. Optics Express, 32(5), 7147–7157. https://doi.org/10.1364/OE.514859

Pechgraber, D., Csencsics, E., & Schitter, G. (2024). Reducing the uncertainty in a switched amplifier-driven positioning system to the sub-nanometer level. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 44–50). https://doi.org/10.1109/AIM55361.2024.10637163

Pechhacker, A., Csencsics, E., & Schitter, G. (2024). Integrator state correction for improved positioning performance of adaptive zero-power MAGLEV systems. In IECON 2024 - 50th Annual Conference of the IEEE Industrial Electronics Society (pp. 1–6). IEEE. https://doi.org/10.1109/IECON55916.2024.10905586

Poik, M., Hackl, T., Di Martino, S., Dang, J., & Schitter, G. (2024). Identification of Parasitic Capacitances in Integrated Circuits by Contactless RF Voltage Sensing. In 2024 54th European Microwave Conference (EuMC) (pp. 248–251). https://doi.org/10.23919/EuMC61614.2024.10732373

Reier, F., Yoo, H. W., Brunner, D., & Schitter, G. (2024). Direct Phase Correction in Phase Locked Loop for Robust Lissajous Scanning of Resonant MEMS Mirrors. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 243–248). https://doi.org/10.1109/AIM55361.2024.10637040

Sinn, A., Kreuzmair, F., Schwaer, C., Prager, P., & Schitter, G. (2024). Characterization of an active secondary mirror positioning system for a small telescope. In R. Navarro & R. Jedamzik (Eds.), Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VI (p. 175). https://doi.org/10.1117/12.3021247

Pechgraber, D., Csencsics, E. K., Yoo, H. W., & Schitter, G. (2023). Controlling the Amplitude of a Resonant Rotational Reluctance Actuated Scanning Mirror System. In 22nd IFAC World Congress. Yokohama, Japan, July 9-14, 2023. Proceedings (pp. 6043–6049). Elsevier. https://doi.org/10.1016/j.ifacol.2023.10.659

Pechhacker, A., Wertjanz, D., Csencsics, E., & Schitter, G. (2023). Model-based flux control of an electropermanent magnet for adaptive zero power gravity compensation. In 22nd IFAC World Congress. Yokohama, Japan, July 9-14, 2023. Proceedings (pp. 5352–5357). Elsevier. https://doi.org/10.1016/j.ifacol.2023.10.180

Csencsics, E. K., Doblinger, G., & Schitter, G. (2023). A novel magnetically levitated tip/tilt motion platform. In H. Ishii, Y. Ebihara, J. Imura, & M. Yamakita (Eds.), 22nd IFAC World Congress (pp. 3379–3385). Elsevier. https://doi.org/10.1016/j.ifacol.2023.10.1485

Buchner, C., Gsellmann, P., Melik-Merkumians, M., & Schitter, G. (2023). Eye-In-Hand Pose Estimation of Industrial Robots. In IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society. 49th Annual Conference of the IEEE Industrial Electronics Society (IECON 2023), Singapur, Singapore. https://doi.org/10.1109/IECON51785.2023.10312053

Zech, C., Römhild, J., Gsellmann, P., Melik-Merkumians, M., & Schitter, G. (2023). Sensorless External Torque Sensing for Collision Detection in Collaborative Robots. In IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society (pp. 1–6). https://doi.org/10.1109/IECON51785.2023.10312606

Poik, M., Hackl, T., Di Martino, S., Schober, M., Dang, J., & Schitter, G. (2023). Model-Based RF Sensing for Contactless High-Resolution Voltage Measurements. IEEE Transactions on Instrumentation and Measurement, 72, 1–8. https://doi.org/10.1109/TIM.2023.3317385

Berlakovich, N., Csencsics, E., Senoner, D., & Schitter, G. (2023). Fast modal reconstruction of large plane wavefronts from sparse measurements using Shack-Hartmann sensors. Applied Optics, 62(26), 6986–6992. https://doi.org/10.1364/AO.493076

Pechgraber, D., Csencsics, E., & Schitter, G. (2023). Resonant Rotational Reluctance Actuator for Large Range Scanning Mirrors. IEEE/ASME Transactions on Mechatronics, 1–10. https://doi.org/10.1109/TMECH.2023.3252940

Poik, M., Hackl, T., Di Martino, S., Schober, M., Dang, J., & Schitter, G. (2023). Analysis of Cross-Talk Induced Measurement Errors in Model-Based RF Voltage Sensing. In 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (pp. 1–6). IEEE. https://doi.org/10.1109/I2MTC53148.2023.10175924

Wertjanz, D., Kern, T., Csencsics, E. K., & Schitter, G. (2023). Feedforward compensation of scan-induced disturbances for a high-precision robotic 3D measurement system. In 2023 American Control Conference (ACC) (pp. 679–684). https://doi.org/10.23919/ACC55779.2023.10156562

Pechhacker, A., Wertjanz, D., Csencsics, E. K., & Schitter, G. (2023). Integrated electromagnetic actuator with adaptable zero power gravity compensation. IEEE Transactions on Industrial Electronics, 1–9. https://doi.org/10.1109/TIE.2023.3288176

Ojdanic, D., Naverschnigg, C., Sinn, A., & Schitter, G. (2023). Deep learning-based long-distance optical UAV detection: color versus grayscale. In Dr. M. Alam & V. Asari (Eds.), Proceedings Volume 12527, Pattern Recognition and Tracking XXXIV. https://doi.org/10.1117/12.2663318

Schwaer, C., Sinn, A., Schröer, L., Wallner, T., & Schitter, G. (2023). Active lateral support system for a thin 1-meter meniscus mirror with virtual fixed points. JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS, 9(2), Article 029003. https://doi.org/10.1117/1.JATIS.9.2.029003

Macho, M., Yoo, H. W., Schroedter, R., & Schitter, G. (2023). Iterative Learning Control for Quasi-Static MEMS Mirror with Switching Operation. In 2023 IEEE 36th International Conference on Micro Electro Mechanical Systems (MEMS) (pp. 538–541). IEEE. https://doi.org/10.1109/MEMS49605.2023.10052637

Berlakovich, N., Csencsics, E., Senoner, D., & Schitter, G. (2023). Reconstructing highly divergent wavefronts from sparse measurements. Applied Optics, 62(36), 9583–9590. https://doi.org/10.1364/AO.502824

Csencsics, E. K., Schlarp, J., Glaser, T., Wolf, T., & Schitter, G. (2023). Reducing the Speckle-induced Measurement Uncertainty in Laser Triangulation Sensors. IEEE Transactions on Instrumentation and Measurement, 72, Article 7000809. https://doi.org/10.1109/TIM.2022.3230481

Csencsics, E., Friedl, B., & Schitter, G. (2023). Shaping the Dynamics of a Low-Stiffness Positioning System by Mechatronic Design for Enabling Stable Unity Gain Feedback. Journal of Dynamic Systems, Measurement, and Control, 145(10), Article 101001. https://doi.org/10.1115/1.4063074

Gsellmann, P., Buchner, C., Egretzberger, K., Melik-Merkumians, M., & Schitter, G. (2023). Depth-data-based object cluster tracking and velocity estimation in robot workspace. In Proceedings of IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society. IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society, Singapore, Singapore. https://doi.org/10.1109/IECON51785.2023.10312361

Hackl, T., Mesquida, P., Poik, M., & Schitter, G. (2023). Ac kelvin probe force microscopy enables nanoscale surface charge mapping in water. In Proceedings of the Microscience Microscopy Congress 2023 incorporating EMAG 2023. Microscience Microscopy Congress 2023, Manchester, United Kingdom of Great Britain and Northern Ireland (the). https://doi.org/10.22443/rms.mmc2023.166

Hackl, T., Poik, M., & Schitter, G. (2023). Quantitative Surface Potential Measurements by AC Electrostatic Force Microscopy. In 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (pp. 1–5). https://doi.org/10.1109/I2MTC53148.2023.10176066

Ojdanic, D., Sinn, A., Naverschnigg, C., & Schitter, G. (2023). Feasibility Analysis of Optical UAV Detection Over Long Distances Using Robotic Telescopes. IEEE Transactions on Aerospace and Electronic Systems, 1–10. https://doi.org/10.1109/TAES.2023.3248560

Wertjanz, D., Berlakovich, N., Csencsics, E., & Schitter, G. (2023). Range extension for large-scale robotic precision 3-D measurements in vibration-prone environments. IEEE Transactions on Instrumentation and Measurement, 72, 1–7. https://doi.org/10.1109/TIM.2023.3268473

Wertjanz, D., Kern, T., Csencsics, E. K., & Schitter, G. (2023). Robot-based measurement system for double-sided inspection of optical components. In I2MTC 2023 Conference Proceedings (pp. 1–6). https://doi.org/10.1109/I2MTC53148.2023.10175937

Wertjanz, D., Kern, T., Csencsics, E., & Schitter, G. (2023). Residual error correction for reducing the uncertainty of a sample-tracking robotic 3D measurement system. In H. Ishii, Y. Ebihara, J. Imura, & M. Yamakita (Eds.), 22nd IFAC World Congress (pp. 4418–4423). Elsevier. https://doi.org/10.1016/j.ifacol.2023.10.1829

Hackl, T., Poik, M., & Schitter, G. (2022). Heterodyne AC Kelvin Probe Force Microscopy for Nanoscale Surface Potential Imaging in Liquids. IEEE Transactions on Instrumentation and Measurement, 72, 1–8. https://doi.org/10.1109/TIM.2022.3230477

Berlakovich, N., Fuerst, M., Csencsics, E., & Schitter, G. (2022). Improving the precision of parallel registration by incorporating a priori information. Optics Express, 30(23), 41473–41491. https://doi.org/10.1364/OE.469299

Haider, C., Fuerst, M. E., Laimer, M., Csencsics, E., & Schitter, G. (2022). Range-extended confocal chromatic sensor system for double-sided measurement of optical components with high lateral resolution. IEEE Transactions on Instrumentation and Measurement, 71. https://doi.org/10.1109/TIM.2022.3216679

Naverschnigg, C., Csencsics, E., & Schitter, G. (2022). Flexible Robot-Based In-Line Measurement System for High-Precision Optical Surface Inspection. IEEE Transactions on Instrumentation and Measurement, 71, 1–9. https://doi.org/10.1109/TIM.2022.3216680

Resetarits, M., Melik-Merkumians, M., & Schitter, G. (2022). Controlling concurrent events in IEC 61499 based systems on FPGAs. In 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA 2022). IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, Germany. Institute of Electrical and Electronic Engineers, Inc (IEEE). https://doi.org/10.34726/3563

Berlakovich, N., Fürst, M. E., Csencsics, E. K., & Schitter, G. (2022). Reconstruction of optical wavefronts with parallel registration algorithms. In Proceedings Volume 12221 - SPIE Optical Manufacturing and Testing XIV. SPIE Optics + Photonics 2022, United States of America (the). SPIE.

Gratzer, A. L., Thormann, S., Schirrer, A., & Jakubek, S. (2022). String stable and collision-safe model predictive platoon control. IEEE Transactions on Intelligent Transportation Systems, 23(10), 19358–19373. https://doi.org/10.1109/TITS.2022.3160236

Nalbach, M., Sensini, A., Motoi, N., Rufin, M., Andriotis, O., Zucchelli, A., Schitter, G., Cristofolini, L., & Thurner, P. (2022, September 22). Time-dependent mechanics of individual collagen fibrils and electrospun fibres. Biomedical and bioinspired materials and structures: a cross-disciplinary approach 2022, Wien, Austria.

Schwaer, C., Sinn, A., & Schitter, G. (2022). Development of active optics for thin meniscus mirrors in 1-meter-class telescopes. In R. Navarro & R. GEYL (Eds.), Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V. SPIE. https://doi.org/10.1117/12.2625986

Sinn, A., Schachner, S., Riel, T., Schwär, C., & Schitter, G. (2022). Feed-forward vibration compensation for small telescopes. In R. Navarro & R. GEYL (Eds.), Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V (pp. 12188-123-1-12188-123–127). SPIE. https://doi.org/10.34726/2921

Sinn, A., Schwär, C., Kremsner, P., & Schitter, G. (2022). High-bandwidth tip-tilt compensation for small telescope systems. In L. Schreiber, D. Schmidt, & E. Vernet (Eds.), Adaptive Optics Systems VIII (pp. 1218584-1-1218584–1218587). SPIE. https://doi.org/10.34726/3001

Hackl, T., Poik, M., & Schitter, G. (2022). Electrostatic Actuation of AFM Cantilevers in Aqueous Solutions. In Proceedings of 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 1538–1542). https://doi.org/10.1109/AIM52237.2022.9863317

Gsellmann, P., Natter, D., & Schitter, G. (2022). Collision Avoidance for a SCARA Robot on Construction Sites. In Proceedings of 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 508–513). Institute of Electrical and Electronic Engineers, Inc (IEEE). https://doi.org/10.34726/3562

Hackl, T., Poik, M., & Schitter, G. (2022). DC-Bias-free Surface Potential Measurements by Heterodyne AC Kelvin Probe Force Microscopy. In Proceedings of 2022 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (pp. 1–5). https://doi.org/10.1109/I2MTC48687.2022.9806676

Nalbach, M., Motoi, N., Rufin, M., Andriotis, O., Schitter, G., & Thurner, P. (2022, June 27). CREEP BEHAVIOR OF INDIVIDUAL COLLAGEN FIBRILS IN TENSION IS DEPENDENT ON CROSS-LINKING. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal.

Nalbach, M., Motoi, N., Rufin, M., Andriotis, O., Schitter, G., & Thurner, P. (2022, June 26). Creep behavior of individual collagen fibrils in tension is dependenton cross-linking. 27th Congress of the European Society of Biomechanics, Portugal.

Motoi, N., Nalbach, M., Ito, S., Thurner, P., & Schitter, G. (2022). Force-Controlled Tensile Test of Collagen Fibril by Using 2-DOF Control System With Modeling Error Compensation. IEEE Open Journal of the Industrial Electronics Society, 3, 366–374. https://doi.org/10.1109/OJIES.2022.3179682

Csencsics, E., Wolf, T., & Schitter, G. (2022). Efficient framework for the simulation of translational and rotational laser speckle displacement in optical sensor assemblies. Optical Engineering, 61(06), Article 061410. https://doi.org/10.1117/1.OE.61.6.061410

Binder, S., Zandrini, T., Yoo, H. W., Schitter, G., & Ovsianikov, A. (2022). Development and characterization of a resonant scanner based 2-photon polymerization printer. In 9th European Conference on Applications of Femtosecond Lasers in Materials Science - FemtoMat 2022 (p. 49).

Cong, B., Schlarp, J., & Schitter, G. (2022). Iterative Learning Control for the Active Error Correction of Polygon Mirror Based Laser Scanning. In Proceedings of 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 522–527). https://doi.org/10.1109/AIM52237.2022.9863305

Csencsics, E., Schlarp, J., Glaser, T., Wolf, T., & Schitter, G. (2022). Simulation and Reduction of Speckle-induced Uncertainty in Laser Triangulation Sensors. In Proceedings of 2022 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (pp. 1–6). https://doi.org/10.1109/I2MTC48687.2022.9806610

Fürst, M. E., Berlakovich, N., Csencsics, E., & Schitter, G. (2022). Scanning Shack-Hartmann sensor for wavefront measurements on freeform optics. In Optical Manufacturing and Testing XIV. SPIE Optical Engineering + Applications, United States of America (the). https://doi.org/10.1117/12.2628328

Hackl, T., Poik, M., & Schitter, G. (2022). Influence of Imaging Parameters on AFM Surface Potential Measurements in Aqueous Solutions. In 2022 IEEE 22nd International Conference on Nanotechnology (NANO) (pp. 39–42). https://doi.org/10.1109/NANO54668.2022.9928605

Hackl, T., Schitter, G., & Mesquida, P. (2022). AC Kelvin Probe Force Microscopy Enables Charge Mapping in Water. ACS Nano. https://doi.org/10.1021/acsnano.2c07121

Ojdanić, D., Gräf, B., Sinn, A., Yoo, H. W., & Schitter, G. (2022). Camera-guided real-time laser ranging for multi-UAV distance measurement. Applied Optics, 61(31), 9233–9240. https://doi.org/10.1364/AO.470361

Poik, M., Mayr, M., Hackl, T., & Schitter, G. (2022). Mechatronic Demodulation for Dynamic Atomic Force Microscopy Measurement Modes. In I2MTC 2022 conference proceedings : 2022 I2MTC - International Instrumentation and Measurement Technology Conference, (pp. 1–6). https://doi.org/10.1109/I2MTC48687.2022.9806639

Poik, M., Mayr, M., Hackl, T., & Schitter, G. (2022). Mechatronic Demodulation of Self-Sensing Cantilever for DC-bias free AFM Imaging in Liquid. In 2022 IEEE 22nd International Conference on Nanotechnology (NANO) (pp. 35–38). https://doi.org/10.1109/NANO54668.2022.9928744

Schlarp, J., Csencsics, E., & Schitter, G. (2022). Analyzing error sources and error propagation in an optical scanning 3D triangulation sensor system. In Proc. SPIE 12222, Optical System Alignment, Tolerancing, and Verification XIV (p. 18). https://doi.org/10.1117/12.2632155

Schlarp, J., Klemen, L., Csencsics, E., & Schitter, G. (2022). Improving the Repeatability of a Color Sensor by Integrating an FSM for Scanning-based Areal Measurements. In Proceedings 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Japan. https://doi.org/10.1109/AIM52237.2022.9863294

Schwaer, C., Stefanek, D., Sinn, A., & Schitter, G. (2022). Integrated Force Sensor based on Optical Distance Measurement for a Modular Actuator used in Active Optics. In Proceedings of 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 496–501). https://doi.org/10.1109/AIM52237.2022.9863267

Sinn, A., Prager, P., Schwaer, C., & Schitter, G. (2022). Design and Evaluation of an Active Secondary Mirror Positioning System for a Small Telescope. JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS, 8(02). https://doi.org/10.1117/1.jatis.8.2.029007

Wertjanz, D., Berlakovich, N., Csencsics, E., & Schitter, G. (2022). Range extension of a scanning confocal chromatic sensor for precise robotic inline 3D measurements. In Proceedings of the IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2020) (pp. 1–6). https://doi.org/10.1109/I2MTC48687.2022.9806615

Wertjanz, D., Csencsics, E., Kern, T., & Schitter, G. (2022). Bringing the lab to the fab: Robot-based inline measurement system for precise 3D surface inspection in vibrational environments. IEEE Transactions on Industrial Electronics, 69(10), 10666–10673. https://doi.org/10.1109/tie.2022.3151959

Wertjanz, D., Kern, T., Pechhacker, A., Csencsics, E., & Schitter, G. (2022). Robotic precision 3D measurements in vibration-prone environments enabled by active six DoF sample-tracking. In Proceedings of 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 1441–1446). https://doi.org/10.1109/AIM52237.2022.9863321

Yoo, H. W., Brunner, D., Macho, M., Niedermueller, L., Devesa, A. J., Kormann, L., & Schitter, G. (2022). Evaluation of robustness against external vibrations for long-range MEMS lidar with one-dimensional resonant micromirror. Journal of Optical Microsystems, 2(01). https://doi.org/10.1117/1.jom.2.1.011007

Melik-Merkumians, M., Gsellmann, P., & Schitter, G. (2021). Modularisierung von Steuerungssoftware : Effizientes Engineering mit IEC 61131 und IEC 61499. Elektrotechnik und Informationstechnik : e & i, 138(6), 309–314. https://doi.org/10.1007/s00502-021-00918-w

Berlakovich, N., Csencsics, E., Fuerst, M., & Schitter, G. (2021). Fast, precise and shape-flexible registration of wavefronts. Applied Optics, 60(23), 6781. https://doi.org/10.1364/ao.425493

Berlakovich, N., Csencsics, E., Fuerst, M., & Schitter, G. (2021). Iterative parallel registration of strongly misaligned wavefront segments. Optics Express, 29(21), 33281. https://doi.org/10.1364/oe.438350

Berlakovich, N., Fuerst, M., Csencsics, E., & Schitter, G. (2021). Robust wavefront segment registration based on a parallel approach. Applied Optics, 60(6), 1578. https://doi.org/10.1364/ao.413207

Brunner, D., Albert, S., Hennecke, M., Darrer, F., & Schitter, G. (2021). Self-sensing control of resonant MEMS scanner by comb-drive current feedback. Mechatronics, 78(102631), 102631. https://doi.org/10.1016/j.mechatronics.2021.102631

Brunner, D., Yoo, H. W., & Schitter, G. (2021). Linear Modeling and Control of Comb-Actuated Resonant MEMS Mirror with Nonlinear Dynamics. IEEE Transactions on Industrial Electronics, 68(4), 3315–3323. https://doi.org/10.1109/tie.2020.2982124

Brunner, D., Yoo, H. W., Schroedter, R., & Schitter, G. (2021). Adaptive Lissajous scanning pattern design by phase modulation. Optics Express, 29(18), 27989. https://doi.org/10.1364/oe.430171

Burgstaller, I., Ito, S., Fujimoto, H., & Schitter, G. (2021). Development of Reluctance Actuator for High-Precision Positioning and Scanning Motion. In 2021 IEEE International Conference on Mechatronics (ICM). IEEE International Conference on Mechatronics 2021, Kashiwa, Japan. https://doi.org/10.1109/icm46511.2021.9385649

Csencsics, E., Thier, M., Ito, S., & Schitter, G. (2021). Supplemental Peak Filters for Advanced Disturbance Rejection on a High Precision Endeffector for Robot-based Inline Metrology. IEEE/ASME Transactions on Mechatronics, 27(4), 2258–2266. https://doi.org/10.1109/tmech.2021.3103040

Csencsics, E., Wolf, T., & Schitter, G. (2021). Speckle simulation tool for the design of laser-based displacement sensors. In Optical Measurement Systems for Industrial Inspection XII. SPIE Optical Metrology Conference 2021, Unknown. SPIE. https://doi.org/10.1117/12.2592596

Galffy, A., Gaggl, R., Mühlbacher, R., Frank, D., Schlarp, J., & Schitter, G. (2021). Turbulence load prediction for manned and unmanned aircraft by means of anticipating differential pressure measurements. CEAS Aeronautical Journal, 12(3), 535–548. https://doi.org/10.1007/s13272-021-00512-y

Gsellmann, P., Melik-Merkumians, M., & Schitter, G. (2021). Robot Guidance utilizing 3D Sensor Data. In Proceedings of the Advanced Intelligent Mechatronics Conference 2020. 2021 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Unknown.

Gsellmann, P., Melik-Merkumians, M., Zoitl, A., & Schitter, G. (2021). A Novel Approach for Integrating IEC 61131-3 Engineering and Execution into IEC 61499. IEEE Transactions on Industrial Informatics, 17(8), 5411–5418. https://doi.org/10.1109/tii.2020.3033330

Hackl, T., Poik, M., & Schitter, G. (2021). Automated Probe-Sample Alignment for the Evaluation of Integrated Circuits. In Proceedings of the Advanced Intelligent Mechatronics Conference 2020. 2021 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Unknown.

Ito, S., Pirker, S., & Schitter, G. (2021). Integrating PWM amplifier with the design of mechatronic systems for energy-efficient precision motion. IEEJ Journal of Industry Applications / Institute of Electrical Engineers in Japan, 10(2), 134–141. https://doi.org/10.1541/ieejjia.20004386

Melik-Merkumians, M., Gsellmann, P., & Schitter, G. (2021). Modularisierung von Steuerungssoftware: Effizientes Engineering mit IEC 61131 und IEC 61499. Elektrotechnik und Informationstechnik : e & i, 138(6), 309–314. https://doi.org/10.1007/s00502-021-00918-w

Merkumians, M. M., Gsellmann, P., & Schitter, G. (2021). Hierarchization and Integration of IEC 61131-3 and IEC 61499 for Enhanced Reusability. In 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ). 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Västerås, Sweden, Sweden. Ieee Ies. https://doi.org/10.1109/etfa45728.2021.9613226

Nalbach, M., Motoi, N., Chalupa-Gantner, F., Andriotis, O. G., Ovsianikov, A., Schitter, G., & Thurner, P. J. (2021). Tensile viscoelasticity of individual collagen fibrils. 2021 NanoScientific Forum Europe (NSFE2021), Freiburg, Germany.

Nalbach, M., Motoi, N., Gantner, F., Andriotis, O. G., Battle, L., Docaj, A., Ovsianikov, A., Schitter, G., Carriero, A., & Thurner, P. J. (2021). Osteogenesis Imperfecta: Brittle Bones From Stronger Collagen Fibrils. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy.

Ojdanic, D., Sinn, A., Schwaer, C., & Schitter, G. (2021). UAV Detection and Tracking with a Robotic Telescope System. In Proceedings of the Advanced Intelligent Mechatronics Conference 2020. 2021 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Unknown.

Rufin, M., Nalbach, M., Andriotis, O. G., Poik, M., Schitter, G., & Thurner, P. J. (2021). AGE-related changes in indentation stiffness and surface charge of individual collagen fibrils through MGO glycation. 13th European Biophysics Conference (EBSA), Vienna, Austria.

Rufin, M., Nalbach, M., Andriotis, O. G., Poik, M., Schitter, G., & Thurner, P. J. (2021). Effect of glycation on surface charge and indentation stiffness of individual collagen fibrils. Orthopaedic Research Society Annual Meeting (ORS 2021), Online, Unknown.

Rufin, M., Nalbach, M., Andriotis, O. G., Poik, M., Schitter, G., & Thurner, P. J. (2021). Effect of glycation on surface charge and indentation stiffness of individual collagen fibrils. Scientific Meeting of the 2021 Austrian Chapter of ESB, Online, Austria.

Rufin, M., Nalbach, M., Andriotis, O. G., Poik, M., Schitter, G., & Thurner, P. J. (2021). Glycation increases indentation stiffness and decreases surface charge of individual collagen fibrils. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy.

Schlarp, J., Scherzer, T., Cong, B., & Schitter, G. (2021). Development of a polygon mirror based SLA 3D-printer. In Proceedings of the Advanced Intelligent Mechatronics Conference 2020. 2021 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Unknown.

Schroedter, R., Yoo, H. W., Brunner, D., & Schitter, G. (2021). Charge-Based Capacitive Self-Sensing With Continuous State Observation for Resonant Electrostatic MEMS Mirrors. Journal of Microelectromechanical Systems, 30(6), 897–906. https://doi.org/10.1109/jmems.2021.3107797

Stadler, G., Csencsics, E., Ito, S., & Schitter, G. (2021). High Precision Hybrid Reluctance Actuator with Integrated Orientation Independent Zero Power Gravity Compensation. IEEE Transactions on Industrial Electronics, 69(12), 13296–13304. https://doi.org/10.1109/tie.2021.3137444

Wertjanz, D., Csencsics, E., & Schitter, G. (2021). 3 DoF Vibration Compensation Platform for Robot-Based Precision Inline Measurements on Free-Form Surfaces. IEEE Transactions on Industrial Electronics, 69(1), 613–621. https://doi.org/10.1109/tie.2021.3055132

Wertjanz, D., Kern, T., Csencsics, E., Stadler, G., & Schitter, G. (2021). Compact scanning confocal chromatic sensor enabling precision 3-D measurements. Applied Optics, 60(25), 7511. https://doi.org/10.1364/ao.428374

Yoo, H. W., Albert, S., & Schitter, G. (2021). Fourier Series based Analytic Model of a Resonant MEMS Mirror for General Voltage Inputs. Journal of Microelectromechanical Systems, 30(3), 343–359. https://doi.org/10.1109/jmems.2021.3072795

Yoo, H. W., Riegler, R., Brunner, D., Albert, S., Thurner, T., & Schitter, G. (2021). Experimental Evaluation of Vibration Influence on a Resonant MEMS Scanning System for Automotive Lidars. IEEE Transactions on Industrial Electronics, 69(3), 3099–3108. https://doi.org/10.1109/tie.2021.3065608

Bansode, S., Bashtanova, U., Li, R., Clark, J., Müller, K. H., Puszkarska, A., Goldberga, I., Chetwood, H. H., Reid, D. G., Colwell, L. J., Skepper, J. N., Shanahan, C. M., Schitter, G., Mesquida, P., & Duer, M. J. (2020). Glycation changes molecular organization and charge distribution in type I collagen fibrils. Scientific Reports, 10, Article 3397. https://doi.org/10.1038/s41598-020-60250-9

Brunner, D., Yoo, H. W., & Schitter, G. (2020). Precise phase control of resonant MOEMS mirrors by comb-drive current feedback. Mechatronics, 71(102420), 102420. https://doi.org/10.1016/j.mechatronics.2020.102420

Cigarini, F., Csencsics, E., Schlarp, J., Ito, S., & Schitter, G. (2020). Multiphysics Finite Element Model for the Computation of the Electro-mechanical Dynamics of a Hybrid Reluctance Actuator. Mathematical and Computer Modelling of Dynamical Systems, 26(4), 322–343. https://doi.org/10.1080/13873954.2020.1766509

Csencsics, E. (2020). Integrated Compensation-based Laser Sensor System for In-plane and Out-of-plane Target Tracking. Applied Optics, 59(20), 6138. https://doi.org/10.1364/ao.395572

Csencsics, E., & Schitter, G. (2020). Dynamic performance estimation: A design tool for mechatronic scanners. In IFAC-PapersOnLine (pp. 8407–8412). https://doi.org/10.1016/j.ifacol.2020.12.1579

Csencsics, E., & Schitter, G. (2020). Exploring the Pareto Fronts of Actuation Technologies for High Performance Mechatronic Systems. IEEE/ASME Transactions on Mechatronics, 26(2), 1053–1063. https://doi.org/10.1109/tmech.2020.3016087

Csencsics, E., Sitz, B., & Schitter, G. (2020). Integration of Control Design and System Operation of a High Performance Piezo-actuated Fast Steering Mirror. IEEE/ASME Transactions on Mechatronics, 25(1), 239–247. https://doi.org/10.1109/tmech.2019.2959087

Fuerst, M. E., Berlakovich, N., Csencsics, E., & Schitter, G. (2020). Self-Aligning Scanning Shack-Hartmann Sensor for Automatic Wavefront Measurements of High-NA Optics. In 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE International Instrumentation and Measurement Technology Conference Proceedings I2MTC (2020), Dubrovnik, Croatia. https://doi.org/10.1109/i2mtc43012.2020.9128499

Fuerst, M. E., Csencsics, E., Berlakovich, N., & Schitter, G. (2020). Automated Measurement of Highly Divergent Optical Wavefronts with a Scanning Shack-Hartmann Sensor. IEEE Transactions on Instrumentation and Measurement, 70, 1–9. https://doi.org/10.1109/tim.2020.3038002

Fuerst, M., Csencsics, E., Haider, C., & Schitter, G. (2020). Confocal chromatic sensor with actively tilted lens for 3D measurement. Journal of the Optical Society of America A, 37(9), B46. https://doi.org/10.1364/josaa.394212

Galffy, A., Schlarp, J., Frank, D., Mühlbacher, R., & Schitter, G. (2020). Turbulence prediction for aircraft by means of high-dynamic differential pressure measurements. In Proceedings of the Aerospace Europe Conference AEC2020. Aerospace Europe Conference AEC2020, Bordeaux, France.

Grahmann, J., Schroedter, R., Kiethe, O., & Todt, U. (2020). Vibration analysis of micro mirrors for LIDAR using on-chip piezo-resistive sensor. In MOEMS and Miniaturized Systems XIX. SPIE Photonics West 2020, San Francisco, United States of America (the). https://doi.org/10.1117/12.2551600

Gsellmann, P., Melik-Merkumians, M., Hurban, M., & Schitter, G. (2020). Heuristic Path Planning Approach for a Granular-fill Insulation Distributing Robot. In IFAC-PapersOnLine (pp. 9956–9961). https://doi.org/10.1016/j.ifacol.2020.12.2711

Ito, S., Pirker, S., & Schitter, G. (2020). Integrated PWM-driven motion system for high positioning resolution and low energy dissipation. In Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) (p. 6).

Ito, S., Poik, M., Csencsics, E., Schlarp, J., & Schitter, G. (2020). High-speed scanning chromatic confocal sensor for 3-D imaging with modeling-free learning control. Applied Optics, 59(29), 9234. https://doi.org/10.1364/ao.399760

Ito, S., Poik, M., Schlarp, J., & Schitter, G. (2020). Atomic Force Microscopy Breaking Through the Vertical Range-Bandwidth Tradeoff. IEEE Transactions on Industrial Electronics, 68(1), 786–795. https://doi.org/10.1109/tie.2020.2982113

Ito, S., Woong Yoo, H., & Schitter, G. (2020). Noise Reduction of Learning Control for Periodic Motion of Galvanometer Scanner. In IFAC-PapersOnLine (pp. 8401–8406). https://doi.org/10.1016/j.ifacol.2020.12.1582

Motoi, N., Nalbach, M., Ito, S., Thurner, P. J., & Schitter, G. (2020). Adaptive Control Method Based on Recursive Least Square Method by Piezoelectric Actuator for Pulling Fibril with Parameter Variation. In IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society. 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), Singapore, Singapore. IEEE. https://doi.org/10.1109/iecon43393.2020.9254330

Nalbach, M., Motoi, N., Gantner, F., Spörl, F. C., Andriotis, O. G., Ovsianikov, A., Schitter, G., & Thurner, P. J. (2020). Novel instrument for rapid and force controlled tensile testing of single collagen fibrils. Scientific Meeting of the Austrian Chapter of ESB, online / Zoom, Austria.

Poik, M., Kohl, D., Mayr, M., Kerschner, C., & Schitter, G. (2020). A Mechatronic Lock-In Amplifier: Integrating Demodulation in Sensor Electronics for Measuring Mechanical Oscillations. IEEE Transactions on Instrumentation and Measurement, 70, 1–8. https://doi.org/10.1109/tim.2020.3047208

Poik, M., Kohl, D., Mayr, M., Kerschner, C., & Schitter, G. (2020). Efficient Demodulation for Measuring the Amplitude of Mechanical Oscillations. In 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE International Instrumentation and Measurement Technology Conference Proceedings I2MTC (2020), Dubrovnik, Croatia. https://doi.org/10.1109/i2mtc43012.2020.9129045

Riel, T., Galffy, A., Janisch, G., Wertjanz, D., Sinn, A., Schwaer, C., & Schitter, G. (2020). High performance motion control for optical satellite tracking systems. Advances in Space Research, 65(5), 1333–1343. https://doi.org/10.1016/j.asr.2019.11.039

Ruiz‑Ortega, L. I., Mesquida, P., Schitter, G., & Tang, B. (2020). Imaging and tracking an electrostatic charge micro-domain by Kelvin force microscopy as evidence of water adsorption on mica surface. Current Applied Physics, 20(12), 1391–1395. https://doi.org/10.1016/j.cap.2020.09.008

Schlarp, J., Csencsics, E., & Schitter, G. (2020). Design and evaluation of an integrated scanning laser triangulation sensor. Mechatronics, 72(102453), 102453. https://doi.org/10.1016/j.mechatronics.2020.102453

Schlarp, J., Csencsics, E., & Schitter, G. (2020). Optical scanning of a laser triangulation sensor for 3D imaging. IEEE Transactions on Instrumentation and Measurement, 69(6), 3606–3613. https://doi.org/10.1109/tim.2019.2933343

Schlarp, J., Csencsics, E., & Schitter, G. (2020). Optically scanned laser line sensor. In 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2020), Dubrovnik, Croatia. https://doi.org/10.1109/i2mtc43012.2020.9129038

Schlarp, J., Csencsics, E., Doblinger, G., & Schitter, G. (2020). Design of a Mechanical Tunable Resonant Fast Steering Mirror. In 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Boston, United States of America (the). https://doi.org/10.1109/aim43001.2020.9159032

Schroedter, R., Csencsics, E., & Schitter, G. (2020). Towards the Analogy of Electrostatic and Electromagnetic Transducers. In IFAC-PapersOnLine (pp. 8941–8946). https://doi.org/10.1016/j.ifacol.2020.12.1423

Schroedter, R., Yoo, H. W., Brunner, D., & Schitter, G. (2020). Capacitive Charge-based Self-Sensing for Resonant Electrostatic MEMS mirrors. In IFAC-PapersOnLine (pp. 8553–8558). https://doi.org/10.1016/j.ifacol.2020.12.568

Schwaer, C., Hofmann, J., Mühlpfordt, M., Frank, A., & Gröll, L. (2020). Modular simulation model for falling film evaporators with novel approach to manage dominant time-varying transport delays. Computers and Chemical Engineering, 132(106604), 106604. https://doi.org/10.1016/j.compchemeng.2019.106604

Schwaer, C., Sinn, A., Keller, P., & Schitter, G. (2020). Design methodology to develop an active optics system for a thin 1-m meniscus mirror. JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS, 6(04). https://doi.org/10.1117/1.jatis.6.4.049002

Wertjanz, D., Csencsics, E., & Schitter, G. (2020). An efficient control transition scheme between stabilization and tracking task of a MAGLEV platform enabling active vibration compensation. In 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Boston, United States of America (the). https://doi.org/10.1109/aim43001.2020.9158924

Wertjanz, D., Csencsics, E., Schlarp, J., & Schitter, G. (2020). Design and control of a MAGLEV platform for positioning in arbitrary orientations. In 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Boston, United States of America (the). https://doi.org/10.1109/aim43001.2020.9158898

Yoo, H. W., & Schitter, G. (2020). Complex Valued State Space Model for Weakly Nonlinear Duffing Oscillator with Noncollocated External Disturbance. In IFAC-PapersOnLine (pp. 8546–8552). https://doi.org/10.1016/j.ifacol.2020.12.571

Yoo, H. W., Albert, S., & Schitter, G. (2020). Accurate Analytic Model of a Parametrically Driven Resonant MEMS Mirror with a Fourier Series Based Torque Approximation. Journal of Microelectromechanical Systems, 29(6), 1431–1442. https://doi.org/10.1109/jmems.2020.3024752

Bibl, M., Zech, C., & Schitter, G. (2019). Vision-Based Nonlinear Feedback Control of a Ball on Ball System With a Programmable Logic Controller. IEEJ Journal of Industry Applications / Institute of Electrical Engineers in Japan, 8(4), 713–719. https://doi.org/10.1541/ieejjia.8.713

Brunner, D., Yoo, H. W., & Schitter, G. (2019). Digital Asynchronous Phase Locked Loop for Precision Control of MOEMS Scanning Mirror. In IFAC-PapersOnLine (pp. 43–48). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.647

Brunner, D., Yoo, H. W., Thurner, T., & Schitter, G. (2019). Data based Modelling and Identification of Nonlinear SDOF MOEMS Mirror. In MOEMS and Miniaturized Systems XVIII (p. 11). SPIE.

Cigarini, F., Ito, S., Konig, J., Sinn, A., & Schitter, G. (2019). Compensation of Hysteresis in Hybrid Reluctance Actuator for High-Precision Motion. In IFAC-PapersOnLine (pp. 477–482). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.721

Cigarini, F., Ito, S., Troppmair, S., & Schitter, G. (2019). Comparative Finite Element Analysis of a Voice Coil Actuator and a Hybrid Reluctance Actuator. IEEJ Journal of Industry Applications / Institute of Electrical Engineers in Japan, 8(2), 192–199. https://doi.org/10.1541/ieejjia.8.192

Csencsics, E., Ito, S., Schlarp, J., & Schitter, G. (2019). System Integration and Control for 3D Scanning Laser Metrology. IEEJ Journal of Industry Applications / Institute of Electrical Engineers in Japan, 8(2), 207–217. https://doi.org/10.1541/ieejjia.8.207

Csencsics, E., Schlarp, J., Schopf, T., & Schitter, G. (2019). Compact High Performance Hybrid Reluctance Actuated Fast Steering Mirror System. Mechatronics, 62(102251), 102251. https://doi.org/10.1016/j.mechatronics.2019.102251

Csencsics, E., Sitz, B., & Schitter, G. (2019). A Fast Piezo Actuated Tip/Tilt Mirror for raster scan applications. In IFAC-PapersOnLine (pp. 289–294). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.689

Fuerst, M. E., & Schitter, G. (2019). Scanning Wavefront Sensor for Measurement of Highly Divergent Wavefronts. In IFAC-PapersOnLine (pp. 25–30). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.644

Galffy, A., Böck, M., & Kugi, A. (2019). Nonlinear 3D path following control of a fixed-wing aircraft based on acceleration control. Control Engineering Practice, 86, 56–69. https://doi.org/10.1016/j.conengprac.2019.03.006

Galffy, A., Car, F., & Schitter, G. (2019). Calibration and flight test of a 3D printed 5-hole probe for high-dynamic wind measurements for UAV. In 2019 Workshop on Research, Education and Development of Unmanned Aerial Systems (RED UAS). International Workshop on Research, Education and Development on Unmanned Aerial Systems, Cranfield, United Kingdom of Great Britain and Northern Ireland (the). https://doi.org/10.1109/reduas47371.2019.8999671

Hurban, M., Melik-Merkumians, M., Steinegger, T., Bibl, M., Gsellmann, P., & Schitter, G. (2019). Automated Tripod Leveling and Parameter Estimation for a Granular-fill Insulation Distributing Robot. In IFAC-PapersOnLine (pp. 223–228). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.678

Ito, S., Cigarini, F., & Schitter, G. (2019). Flux-controlled Hybrid Reluctance Actuator for High-precision Scanning Motion. IEEE Transactions on Industrial Electronics, 67(11), 9593–9600. https://doi.org/10.1109/tie.2019.2952829

Ito, S., Lindner, B., & Schitter, G. (2019). Sample-tracking Vibration Isolation with Hybrid Reluctance Actuators for Inline Metrology. In IFAC-PapersOnLine (pp. 537–542). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.731

Ito, S., Troppmair, S., Cigarini, F., & Schitter, G. (2019). High-speed Scanner with Nanometer Resolution Using a Hybrid Reluctance Force Actuator. IEEJ Journal of Industry Applications / Institute of Electrical Engineers in Japan, 8(2), 170–176. https://doi.org/10.1541/ieejjia.8.170

Ito, S., Troppmair, S., Lindner, B., Cigarini, F., & Schitter, G. (2019). Long-range Fast Nanopositioner Using Nonlinearities of Hybrid Reluctance Actuator for Energy Efficiency. IEEE Transactions on Industrial Electronics, 66(4), 3051–3059. https://doi.org/10.1109/tie.2018.2842735

Kohl, D., Kerschner, C., Mesquida, P., & Schitter, G. (2019). Increasing the SNR of Electrical AFM Methods by Active Mechanical Q-control. In IFAC-PapersOnLine (pp. 307–312). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.692

Mesquida, P., Kohl, D., & Schitter, G. (2019). Signal reversal in Kelvin-probe force microscopy. Review of Scientific Instruments, 90(11), 113703. https://doi.org/10.1063/1.5118357

Poik, M., Kohl, D., & Schitter, G. (2019). Similarity-based Feedback Control with Reduced Capacitive Load for Linear Operation of Piezoelectric Actuators. In IFAC-PapersOnLine (pp. 585–590). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.739

Riel, T., Sinn, A., Schwaer, C., Ploner, M., & Schitter, G. (2019). Iterative Trajectory Learning for Highly Accurate Optical Satellite Tracking Systems. Acta Astronautica, 164, 121–129. https://doi.org/10.1016/j.actaastro.2019.07.012

Ruiz‑Ortega, L. I., Schitter, G., & Mesquida, P. (2019). Electrostatic Read Out for Label‑Free Assays Based on Kelvin Force Principle. Sensing and Imaging, 20, Article 23. https://doi.org/10.1007/s11220-019-0244-0

Schitter, G. (2019). Extending Nano-Mechanical and Electrical Measurement Modes in AFM: A System Integration Approach. Nano and Photonics 2019, Mauterndorf, Austria.

Schitter, G. (2019). Integrated System Design and Control of Mechatronic Imaging Systems. 7th International Conference on Control, Mechatronics and Automation ICCMA, Delft, Netherlands (the).

Schitter, G. (2019). Mechatronic design and control of scanning measurement systems. Infineon Summer School, Villach, Austria.

Schitter, G. (2019). Scientific Instrumentation for Atomic Force Microscopy: Adding Speed and Versatility. Mini-Symposium on Scanning Probe Microscopy, Delft, Netherlands (the).

Schitter, G. (2019). Scientific Instrumentation for Imaging at the Nanoscale: Adding Speed and Versatility. Biointerface Doctoral School, TU Wien, Neusiedl am See, Austria.

Schlarp, J., Csencsics, E., & Schitter, G. (2019). Scanning laser triangulation sensor geometry maintaining imaging condition. In IFAC-PapersOnLine (pp. 301–306). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.691

Schroedter, R., Grahmann, J., & Janschek, K. (2019). Silicone Oil Damping for Quasi-static Micro Scanners with Electrostatic Staggered Vertical Comb Drives. In R. Schroedter, J. Grahmann, & K. Janschek (Eds.), IFAC-PapersOnLine (pp. 37–42). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.646

Schroedter, R., Schwarzenberg, M., Janschek, K., & Grahmann, J. (2019). Rasterscan mit ruckbegrenzten Trajektorien für quasi-statisch/resonante Mikroscanner. In Tagungsband Fachtagung Mechatronik (pp. 155–160).

Schwaer, C., Sinn, A., & Schitter, G. (2019). Mechatronic Approach towards Lightweight Mirrors with Active Optics for Telescope Systems. In IFAC-PapersOnLine (pp. 7–12). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.641

Sinn, A., Riel, T., Deisl, F., Schachner, S., & Schitter, G. (2019). High-bandwidth tip-tilt vibration compensation in telescope systems. In IFAC-PapersOnLine (pp. 549–554). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.733

Sinn, A., Riel, T., Kremsner, P., & Schitter, G. (2019). Analysis of tip-tilt compensation for reflective free-space optical satellite communication. In Free-Space Laser Communications XXXI (p. 12). SPIE.

Yoo, H. W., Brunner, D., Thurner, T., & Schitter, G. (2019). Compensation for Temperature Dependency of 1D Position Sensitive Detector. In Advances in Display Technologies IX (p. 10). SPIE.

Yoo, H. W., Brunner, D., Thurner, T., & Schitter, G. (2019). MEMS Test Bench and its Uncertainty Analysis for Evaluation of MEMS Mirrors. In IFAC-PapersOnLine (pp. 49–54). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.648

Yoo, H. W., Kerschner, C. J., Ito, S., & Schitter, G. (2019). Iterative Learning Control for Laser Scanning based Micro 3D Printing. In IFAC-PapersOnLine (pp. 169–174). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.669

Bibl, M., Zech, C., & Schitter, G. (2018). Design and Control of a Ball on Ball System With a Programmable Logic Controller and Vision Feedback. In Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) (p. 6).

Cigarini, F., Ito, S., Troppmair, S., & Schitter, G. (2018). Comparison of a Voice Coil and a Hybrid Reluctance Actuator via FEM. In Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) (p. 6).

Csencsics, E., Ito, S., Schlarp, J., & Schitter, G. (2018). System Integration and Control of Mechatronic Imaging Systems. In Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) (p. 8).

Csencsics, E., Schlarp, J., & Schitter, G. (2018). High Performance Hybrid-Reluctance-Force-based Tip/tilt System: Design, Control and Evaluation. IEEE/ASME Transactions on Mechatronics, 23(5), 2494–2502. https://doi.org/10.1109/tmech.2018.2866272

Csencsics, E., Thier, M., Hainisch, R., & Schitter, G. (2018). System and Control Design of a Voice Coil Actuated Mechanically Decoupling Two-body Vibration Isolation System. IEEE/ASME Transactions on Mechatronics, 23(1), 321–330. https://doi.org/10.1109/tmech.2017.2771440

Fuerst, M., Unger, S., Ito, S., & Schitter, G. (2018). Wavefront measurement based feedback control for automatic alignment of a high-NA optical system. Journal of Physics: Conference Series, 1065, Article 032001. https://doi.org/10.1088/1742-6596/1065/3/032001

Gsellmann, P., Melik-Merkumians, M., & Schitter, G. (2018). Comparison of Code Measures of IEC 61131-3 and 61499 standards for Typical Automation Applications. In Proceedings of the 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (pp. 1047–1050).

Ito, S., & Schitter, G. (2018). Atomic Force Microscopy Capable of Vibration Isolation with Low-stiffness Z-axis Actuation. Ultramicroscopy, 186, 9–17. https://doi.org/10.1016/j.ultramic.2017.12.007

Ito, S., & Schitter, G. (2018). Optimal Fail-Safe Motion Using Dynamic Brake for Lorentz-actuated AFM. In Proceedings of the 2018 15th International Workshop on Advanced Motion Control (AMC) (p. 6).

Ito, S., Poik, M., Csencsics, E., Schlarp, J., & Schitter, G. (2018). Scanning Chromatic Confocal Sensor for Fast 3D Surface Characterization. In Proceedings of the 2018 Summer Topical Meeting, Advancing Precision in Additive Manufacturing (pp. 226–231).

Ito, S., Troppmair, S., Cigarini, F., & Schitter, G. (2018). Hybrid Reluctance Actuator for High-speed Scanning with Nanometer Resolution. In Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) (p. 6).

Mesquida, P., Kohl, D., Bansode, S., Duer, M., & Schitter, G. (2018). Water desorption in Kelvin-probe force microscopy: a generic model. Nanotechnology, 29(50), 505705. https://doi.org/10.1088/1361-6528/aae413

Poik, M., Kohl, D., & Schitter, G. (2018). Similarity-based Feedback Control for Linear Operation of Piezoelectric Actuators. In 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (p. 6).

Riel, T., Galffy, A., & Schitter, G. (2018). Analysis and Robust Control of an Precision Motion Platform using Disturbance Compensation. In Proceedings of the IEEE Conference on Control Technology and Applications (CCTA) (p. 6).

Schitter, G. (2018). System Integration and Control of Mechatronic Imaging Systems. FEI Thermo Fisher Scientific, Brno, Czechia.

Schlarp, J., Csencsics, E., & Schitter, G. (2018). Feature detection and scan area selection for 3D laser scanning sensors. In 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Auckland, New Zealand. https://doi.org/10.1109/aim.2018.8452235

Schlarp, J., Csencsics, E., & Schitter, G. (2018). Influence of Scheimpflug condition on measurements of a scanning laser line sensor for 3D imaging. Journal of Physics: Conference Series, 1065, 142006. https://doi.org/10.1088/1742-6596/1065/14/142006

Schlarp, J., Csencsics, E., & Schitter, G. (2018). Optical scanning of laser line sensors for 3D imaging. Applied Optics, 57(18), 5242. https://doi.org/10.1364/ao.57.005242

Schlarp, J., Csencsics, E., Ito, S., & Schitter, G. (2018). Design and Evaluation of a 3D Printed Flexure for a Fast Steering Mirror. In Proceedings of the 2018 Summer Topical Meeting, Advancing Precision in Additive Manufacturing (p. 5).

Schroedter, R., Roth, M., Janschek, K., & Sandner, T. (2018). Flatness-based open-loop and closed-loop control for electrostatic quasi-static microscanners using jerk-limited trajectory design. Mechatronics, 56, 318–331. https://doi.org/10.1016/j.mechatronics.2017.03.005

Schroedter, R., Schwarzenberg, M., Grahmann, J., Sandner, T., & Janschek, K. (2018). Repetitive nonlinear control for linear scanning micro mirrors. In Proc. SPIE 10545, MOEMS and Miniaturized Systems XVII (p. 8). SPIE.

Thurner, P. J., Andriotis, O. G., Desissaire, S., Jones, M. G., Thorpe, C., Spiesz, E., Rohatschek, A., Nalbach, M., Schitter, G., Screen, H. R. C., & Davies, D. E. (2018). Micromechanics of collagen rich-tissues and nanomechanics of individual collagen fibrils as a function of hydration, cross-linking, age and tissue function. 8th World Congress of Biomechanics, WCB 2018, Dublin, Ireland.

Thurner, P. J., Desissaire, S., Rohatschek, A., Nalbach, M., Schitter, G., & Andriotis, O. G. (2018). Collagen mechanics at the fibril level and below as a function of hydration, cross-linking, age and tissue function. XX. Linz Winter Workshop, Linz, Austria.

Csencsics, E., & Schitter, G. (2017). Design of a phase-locked-loop-based control scheme for Lissajous-trajectory scanning of fast steering mirrors. In Proceedings of the American Control Conference (ACC), 2017 (p. 6).

Csencsics, E., & Schitter, G. (2017). Mechatronisches Design und Regelung eines 2D Kippspiegelsystems. In 51. Regelungstechnisches Kolloquium (p. 2).

Csencsics, E., & Schitter, G. (2017). Parametric PID Controller Tuning for a Fast Steering Mirror. In Proceedings of the 1st IEEE Conference on Control Technology and Applications (CCTA (p. 6).

Csencsics, E., & Schitter, G. (2017). System Design and Control of a Resonant Fast Steering Mirror for Lissajous-based Scanning. IEEE/ASME Transactions on Mechatronics, 22(5), 1963–1972. https://doi.org/10.1109/tmech.2017.2722578

Csencsics, E., Ito, S., Fuerst, M., Schlarp, J., Cigarini, F., & Schitter, G. (2017). Christian Doppler Laboratory “Precision Engineering for Automated In-line Metrology.” 1st GMAR workshop, Wien, Austria.

Csencsics, E., Schlarp, J., & Schitter, G. (2017). Bandwidth extension of hybrid-reluctance-force-based tip/tilt system by reduction of eddy currents. In Proceedings of the 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM2017) (pp. 1167–1172).

Hofmair, M. W., Melik-Merkumians, M., Böck, M., Merdan, M., Schitter, G., & Kugi, A. (2017). Patching process optimization in an agent-controlled timber mill. Journal of Intelligent Manufacturing, 28(1), 69–84. https://doi.org/10.1007/s10845-014-0962-z

Ito, S., Neyer, D., Steininger, J., & Schitter, G. (2017). Dual Actuation of Fast Scanning Axis for High-speed Atomic Force Microscopy. In Proceedings of the IFAC 2017 World Congress (p. 6).

Ito, S., Unger, S., & Schitter, G. (2017). Vibration isolator carrying atomic force microscope’s head. Mechatronics, 44, 32–41.

Ito, S., Yoo, H. W., & Schitter, G. (2017). Comparison of Modeling-free Learning Control Algorithms for Galvanometer Scanner’s Periodic Motion. In AIM 2017 Proceedings (p. 6).

Kohl, D., Hoser, S., & Schitter, G. (2017). Budgeting of Systematic Versus Stochastic Errors in Sensor Fusion for Piezo Electric Transducers. In IFAC-PapersOnLine (pp. 7651–7656). https://doi.org/10.1016/j.ifacol.2017.08.1165

Kohl, D., Kerschner, C., & Schitter, G. (2017). Active damping by Q-control for fast force-distance curve measurements in atomic force microscopy. Review of Scientific Instruments, 88, 5.

Kohl, D., Kerschner, C., & Schitter, G. (2017). Automatic Fourier Synthesis Based Input-Shaping for Scanning Piezo-Electric Actuators. In Proceedings of the 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM2017) (pp. 1083–1088).

Kohl, D., Mesquida, P., & Schitter, G. (2017). Multi-frequency Kelvin Probe Force Microscopy Method for Charge Mapping Without DC-Bias. Nano and Photonics & FemtoMat, Mauterndorf, Austria.

Kohl, D., Mesquida, P., & Schitter, G. (2017). Pitfalls of practical KPFM-phase-tuning leading to polarity reversal on biological samples. AFM BioMed, Krakow, Poland.

Kohl, D., Mesquida, P., & Schitter, G. (2017). Quantitative AC - Kelvin Probe Force Microscopy. Microelectronic Engineering, 176, 28–32.

Mesquida, P., Kohl, D., Andriotis, O. G., Thurner, P. J., Duer, M. J., Bansode, S. B., & Schitter, G. (2017). Kelvin-Probe Force Microscopy to Map Glycation of Proteins. AFM BioMed, Krakau, Poland.

Mesquida, P., Stone, A., Ruiz, L., Kohl, D., Andriotis, O. G., & Schitter, G. (2017). Using Electrostatic Force Microscopy to Map Biophysical and Biochemical Processes at High Resolution. Nano and Photonics & FemtoMat, Mauterndorf, Austria.

Riel, T., Galffy, A., Sinn, A., & Schitter, G. (2017). Improvement of the angular precision of an optical metrology platform by disturbance compensation. In Proceedings of the 2017 Spring Topical Meeting on Precision Engineering and Optics: What are the Limits of Precision, and How to Characterize Them? (pp. 15–20).

Riel, T., Saathof, R., Katalenic, A., Ito, S., & Schitter, G. (2017). Noise analysis and efficiency improvement of a pulse-width modulated permanent magnet synchronous motor by dynamic error budgeting. Mechatronics, 50, 225–233. https://doi.org/10.1016/j.mechatronics.2017.10.006

Saathof, R., Thier, M., Hainisch, R., & Schitter, G. (2017). Integrated system and control design of a one DoF nano-metrology platform. Mechatronics, 47, 88–96.

Schitter, G. (2017). Scientific Instrumentation for Atomic Force Microscopy: Adding Speed and Versatility. Seminar Hybrid Devices Group, Berlin, Germany.

Schitter, G. (2017). Scientific instrumentation for atomic force microscopy:adding speed and versatility. Seminar for Physical Chemistry and Materials Chemistry, Wien, Austria.

Schroedter, R., Schwarzenberg, M., Dreyhaupt, A., Barth, R., Sandner, T., & Janschek, K. (2017). Microcontroller based closed-loop control of a 2D quasi-static/resonant microscanner with on-chip piezo-resistive sensor feedback. In Proc. SPIE 10116, MOEMS and Miniaturized Systems XVI (p. 11).

Sinn, A., Riel, T., Deisl, F., & Schitter, G. (2017). Tip-tilt vibration compensation: A system analysis. In Proceedings of 2017 Spring Topical Meeting on Precision Engineering and Optics: What are the Limits of Precision, and How to Characterize Them? (pp. 42–47).

Steinegger, M., Melik-Merkumians, M., & Schitter, G. (2017). Ontology-based framework for the generation of interlock code with redundancy elimination. In 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). 22nd IEEE International Conference on Emerging Technologies And Factory Automation, Limassol, Cyprus. https://doi.org/10.1109/etfa.2017.8247710

Steinegger, M., Melik-Merkumians, M., Zajc, J., & Schitter, G. (2017). A framework for automatic knowledge-based fault detection in industrial conveyor systems. In 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). 22nd IEEE International Conference on Emerging Technologies And Factory Automation, Limassol, Cyprus. https://doi.org/10.1109/etfa.2017.8247705

Varhegyi, T., Melik-Merkumians, M., Steinegger, M., Halmetschlager, G., & Schitter, G. (2017). A Visual Servoing Approach for a Six Degrees-of-Freedom Industrial Robot by RGB-D Sensing. In P. M. Roth, M. Vincze, W. Kubinger, A. Müller, B. Blaschitz, & S. Stolc (Eds.), Proceedings of the OAGM&ARW Joint Workshop Vision, Automation and Robotics (pp. 81–86). Verlag der Technischen Universität Graz. https://doi.org/10.3217/978-3-85125-524-9-14

Paris, R., Melik-Merkumians, M., & Schitter, G. (2016). Probabilistic Absolute Position Sensor Based on Objective Laser Speckles. IEEE Transactions on Instrumentation and Measurement, 65(5), 1188–1196. https://doi.org/10.1109/tim.2016.2526741

Bibl, M., Robin, M., Steinegger, M., & Schitter, G. (2016). Framework for Implementation of Iterative Learning Control on Programmable Logic Controllers. In Proceedings of 2016 IEEE 21th Conference on Emerging Technologies & Factory Automation (p. 4).

Cigarini, F., Csencsics, E., Saathof, R., & Schitter, G. (2016). Design of Tuneable Damping for Precision Positioning of a Two-Body System. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 222–227). IFAC-PapersOnLine/Elsevier.

Csencsics, E., Saathof, R., & Schitter, G. (2016). Design of a Dual-Tone Controller for Lissajous-based Scanning of Fast Steering Mirrors. In Proceeding of the 2016 American Control Conference (pp. 461–466).

Csencsics, E., Thier, M., Siegl, P., & Schitter, G. (2016). Mechatronic Design of an Active Two-body Vibration Isolation System. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 133–140). IFAC-PapersOnLine/Elsevier.

Ito, S., & Schitter, G. (2016). Comparison and Classification of High-precision Actuators Based on Stiffness Influencing Vibration Isolation. IEEE/ASME Transactions on Mechatronics, 21(2), 1169–1178. https://doi.org/10.1109/tmech.2015.2478658

Ito, S., Cigarini, F., Unger, S., & Schitter, G. (2016). Flexure design for precision positioning using low-stiffness actuators. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 200–205).

Kohl, D., Mesquida, P., & Schitter, G. (2016). Quantitative DC-free Kelvin Probe Force Microscopy. In Final Program 42nd International Conference on Micro and Nano Engineering (p. 2).

Kohl, D., Mick, D., Riel, T., Saathof, R., & Schitter, G. (2016). Extending the Range of Geophones by Negative Impedance Converter. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 541–546). IFAC-PapersOnLine/Elsevier.

Kohl, D., Riel, T., Saathof, R., Steininger, J., & Schitter, G. (2016). Auto-Tuning PI Controller for Surface Tracking in Atomic Force Microscopy - A Practical Approach. In Proceedings of the 2016 American Control Conference (p. 6).

Kugi, A., & Craig, I. K. (2016). FOREWORD 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing MMM 2016. In G. Schitter (Ed.), IFAC-PapersOnLine (pp. i–vi). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/s2405-8963(16)32409-0

Lieb, A., Howald, L., Fricker, S., Thier, M., & Schitter, G. (2016). Atomic Force Microscope for In-Line Metrology. Industrial Technologies 2016, Amsterdam, Netherlands (the).

Melik-Merkumians, M. (2016). 4DIAC in Teaching - Lessons from Lab Exercises and Student Projects. 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, Germany.

Melik-Merkumians, M., Baierling, M., & Schitter, G. (2016). A service-oriented domain specific language programming approach for batch processes. In 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA). 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, Germany. https://doi.org/10.1109/etfa.2016.7733729

Nahar, S. N., Schmets, A. J. M., Schitter, G., & Scarpas, A. (2016). Quantifying the Thermomechanical Response of Bitumen from Microphase Properties. Transportation Research Record, 2574(1), 101–110. https://doi.org/10.3141/2574-11

Nahar, S., Schmets, A., Schitter, G., & Scarpas, A. (2016). Quantifying the Thermo-mechanical Response of Bitumen from Micro-Phase Properties. In TRB 95th Annual Meeting: Compendium of Papers (p. 16).

Riel, T., Katalenic, A., Saathof, R., & Schitter, G. (2016). Dynamic Error Budgeting for a Friction-afflicted Permanent Magnet Synchronous Motor. In Proceedings ASPE 2016 Spring Topical Meeting - Precision Mechatronic SystemDesign and Control (pp. 74–79).

Riel, T., Saathof, R., Katalenic, A., & Schitter, G. (2016). Noise Analysis and Improvement of a Permanent Magnet Synchronous Motor by Dynamic Error Budgeting. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 339–346).

Riel, T., Saathof, R., Katalenic, A., & Schitter, G. (2016). Tracking Performance Analysis and Control of a Small Robotic Telescope System. In AMOS 2016 Proceedings (p. 8).

Saathof, R., & Schitter, G. (2016). Low photon-count tip-tilt sensor. In AS16 Proceedings (p. 8).

Saathof, R., Riel, T., Bibl, M., Kohl, D., Yoo, H. W., & Schitter, G. (2016). Non-parametric robustness analysis for feedback motion control for a high precision stage with large mass uncertainty. In Proceedings of the 2016 American Control Conference (pp. 2611–2616).

Saathof, R., Wansink, M. V., Hoijkamp, E., Spronck, J. W., & Munnig Schmidt, R. (2016). Deformation control of a thermal active mirror. Mechatronics, 39, 12–27.

Schroedter, R., Sandner, T., Janschek, K., Roth, M., & Hruschka, C. (2016). Real-time closed-loop control for micro mirrors with quasistatic comb drives. In Proc. SPIE 9760, MOEMS and Miniaturized Systems XV (p. 13).

Sinn, A., Riel, T., Deisl, F., Saathof, R., & Schitter, G. (2016). Low-Power Reflective Optical Communication System for Pico- and Nano-Satellites. In AMOS 2016 Proceedings (pp. 1403–1410).

Steinegger, M., Melik-Merkumians, M., Zajc, J., & Schitter, G. (2016). Automatic generation of diagnostic handling code for decentralized PLC-based control architectures. In 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA). 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, Germany. https://doi.org/10.1109/etfa.2016.7733694

Steinegger, M., Plaschka, N., Melik-Merkumians, M., & Schitter, G. (2016). A framework for modular and distributable control of reconfigurable robotic systems. In 2016 IEEE International Conference on Industrial Technology (ICIT). 2016 IEEE International Conference on Industrial Technology, Taipe, Taiwan (Province of China). https://doi.org/10.1109/icit.2016.7474862

Thier, M., Saathof, R., Hainisch, R., & Schitter, G. (2016). Metrology Platform to Enable In-Line Nanometrology. Industrial Technologies 2016, Amsterdam, Netherlands (the).

Thier, M., Saathof, R., Sinn, A., Hainisch, R., & Schitter, G. (2016). Six Degree of Freedom Vibration Isolation Platform for In-Line Nano-Metrology. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 149–156).

Unger, S., Ito, S., Kohl, D., & Schitter, G. (2016). Development of a Compact Atomic Force Microscope Based on an Optical Pickup Head. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 629–635).

Wenger, M., Zoitl, A., & Schitter, G. (2016). Automatic Reengineering of IEC 61131-Based Control Applications into IEC 61499. In A. Zoitl & T. Strasser (Eds.), Distributed Control Applications (pp. 97–121). CRC Press, Boca Raton, London, New York (Taylor & Francis Group).

Yoo, H. W., Ito, S., & Schitter, G. (2016). High Speed Laser Scanning Microscopy by Iterative Learning Control of a Galvanometer Scanner. Control Engineering Practice, 50, 12–21. https://doi.org/10.1016/j.conengprac.2016.02.007

Yoo, H. W., van Royen, M. E., van Cappellen, W. A., Houtsmuller, A. B., Verhaegen, M., & Schitter, G. (2016). Adaptive Optics for Confocal Laser Scanning Microscopy with Adjustable Pinhole. In Proceedings of SPIE Vol. 9887, Biophotonics: Photonic Solutions for Better Health Care V (pp. 1–11).

Faschang, M., Xypolytou, E., Meisel, M., Wendt, A., Kaufmann, T., Litzlbauer, M., Marchgraber, J., Bibl, M., Prostejovsky, A., Gawron-Deutsch, T., & Kienesberger, G. (Eds.). (2015). ICT4RobustGrid Transition Roadmap - from Centralized to Massively Decentralized Grid Control Systems. Eigenverlag.

Ito, S., Neyer, D., Pirker, S., Steininger, J., & Schitter, G. (2015). Atomic Force Microscopy Using Voice Coil Actuators for Vibration Isolation. In Proceedings of the IEEE/ASME International conference on advanced intelligent mechatronics AIM2015 (p. 6).

Ito, S., Steininger, J., & Schitter, G. (2015). Low-stiffness Dual Stage Actuator for Long Rage Positioning with Nanometer Resolution. Mechatronics, 29, 46–56. https://doi.org/10.1016/j.mechatronics.2015.05.007

Nahar, S., Schmets, A., Kasbergen, C., Schitter, G., & Scarpas, A. (2015). Self-Healing of Bituminous Materials by Damage Reversal at the Microstructural Scale. In Annual Meeting Compendium of Papers (p. 15).

Paris, R., Melik-Merkumians, M., & Schitter, G. (2015). Vision-based probabilistic absolute position sensor. In 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings. IEEE International Instrumentation and Measurement Technology Conference (I2MTC) 2015, Pisa, Italy. https://doi.org/10.1109/i2mtc.2015.7151601

Saathof, R. (2015). Academic opto-mechatronic career design. Master-workshop, Control Systems Group, Eindhoven, Netherlands (the).

Saathof, R. (2015). Opto-mechatronic system/career design. MSC workshop TU Eindhoven, Eindhoven, Netherlands (the).

Saathof, R., Schutten, G. J. M., Spronck, J. W., & Munnig Schmidt, R. H. (2015). Actuation profiles to form Zernike shapes with a thermal active mirror. Optics Letters, 40(2), 205. https://doi.org/10.1364/ol.40.000205

Saathof, R., Schutten, G. J. M., Spronck, J. W., & Munnig Schmidt, R. H. (2015). Design and characterisation of an active mirror for EUV-lithography. Precision Engineering, 41, 102–110. https://doi.org/10.1016/j.precisioneng.2015.03.004

Schitter, G. (2015). Control in Mechatronic Imaging Systems. High-Tech Mechatronics in (e)motion!, Delft, Netherlands (the).

Schitter, G. (2015). Instrumentierung und Regelung für hochauflösende Positionier und Meßsysteme. 5. nanoNET-meeting, Wien, Austria.

Schitter, G. (2015). Nanoscale Imaging Systems in Manufacturing. Nano and Photonics 2015, Mautendorf, Austria.

Schitter, G. (2015). Präzises Positionieren und Messen in der Hochtechnologie. OVE Österreichischer Verband für Elektrotechnik, Wien, Austria.

Schitter, G. (2015). Advanced Mechatronics for Precision Engineering and Mechatronic Imaging Systems. In Proceedings of the 8th Vienna International Conference on Mathematical Modelling (MATHMOD) (pp. 942–943).

Schitter, G. (2015). Mess-, Automatisierungs- und Robotertechnik. Elektrotechnik Und Informationstechnik, 132(4–5), 189–190. https://doi.org/10.1007/s00502-015-0310-9

Steininger, J., Bibl, M., Yoo, H. W., & Schitter, G. (2015). High bandwidth deflection readout for atomic force microscopes. Review of Scientific Instruments, 86.

Thier, M., Saathof, R., Csencsics, E., Hainisch, R., Sinn, A., & Schitter, G. (2015). Entwurf und Regelung eines Positioniersystems für robotergestützte Nanomesstechnik. AT-AUTOMATISIERUNGSTECHNIK, 63, 727–738.

Thier, M., Saathof, R., Hainisch, R., & Schitter, G. (2015). Vibration Compensation Platform for Robot-based Nanoscale Measurements. In Proceedings of the 15th international conference of the european society for precision engineering and nanotechnology (pp. 211–212).

Yoo, H. W. (2015). Fast, Accurate, and Aberration-Compensated Imaging of Confocal Laser Scanning Microscopy. Creative IT Engineering, Pohang, Korea (the Republic of).

Deng, R., Saathof, R., Spronck, J. W., Hol, S., & Munnig Schmidt, R. (2014). Integrated 6-DoF Lorentz Actuator with Gravity Compensator for Precision Positioning. In MagLev 2014 (p. 10).

Fraxedas, J., Staufer, U., Munnig Schmidt, R., Spronck, J. W., Trinidad, E. R., Deng, R., Schitter, G., Thier, M., Messineo, S., Ito, S., Hainisch, R., Saathof, R., Perez-Murano, F., Verdaguer, A., Blümel, A., List-Kratochvil, E. J. W., Koops, R., van Veghel, M., Sum, R., … Puigoriol-Forcada, J. M. (2014). Automated inline Metrology for Nanoscale Production - aim4np. European Conference on Surface Science 2014, Antalya, Turkey.

Hametner, R., Hegny, I., & Zoitl, A. (2014). A Unit-Test Framework for Event-Driven Control Components Modeled in IEC 61499. In Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2014) (p. 8).

Ito, S., Steininger, J., & Schitter, G. (2014). Sliding Mode and PID Control of a Dual Stage Actuator for Precision Positioning. In Proceedings of the 19th World Congress of the International Federation of Automatic Control (pp. 6550–6555). International Federation of Automatic Control.

Koops, R., Staufer, U., Munnig Schmidt, R., Spronck, J. W., Trinidad, E. R., Deng, R., Schitter, G., Thier, M., Messineo, S., Ito, S., Hainisch, R., Saathof, R., Fraxedas, J., Perez-Murano, F., Verdaguer, A., Blümel, A., List-Kratochvil, E. J. W., van Veghel, M., Sum, R., … Puigoriol-Forcada, J. M. (2014). Automated in-line Metrology for Nanoscale Production - aim4np. 3rd International Conference on Industrial Technologies Research and Innovation, Athen, Greece.

Munnig Schmidt, R., Schitter, G., Rankers, A., & van Eijk, J. (2014). The Design of High Performance Mechatronics: 2nd Edition. High-Tech Functionality by Multidisciplinary System Integration. Delft University Press.

Nahar, S., Qiu, J., Schmets, A., Schlangen, E., Shirazi, M., Van de Ven, M., Schitter, G., & Scarpas, A. (2014). Turning Back Time: Rheological and Microstructural Assessment of Rejuvenated Bitumen. In Proceedings of the Transportation Research Board 93rd annual meeting 2014 (p. 16).

Nahar, S., Schmets, A., Scarpas, A., & Schitter, G. (2014). Microstructural changes in bitumen at the onset of crack formation. European Polymer Journal, 56, 17–25.

Nahar, S., Schmets, A., Schitter, G., & Scarpas, A. (2014). Quantitative nanomechanical property mapping of bitumen micro-phases by peak-force Atomic Force Microscopy. In Asphalt Pavements (pp. 1397–1406). Taylor & Francis Group.

Saathof, R., Spronck, J. W., & Munnig Schmidt, R. (2014). Counteracting Thermal Issues in EUV-Lithography using an Adaptive Optics System. In Proceeding of the EUSPEN Special Interest Group: Thermal Issues (p. 2).

Saathof, R., Spronck, J. W., & Schmidt, R. M. (2014). Design of an AM for EUV lithography. Mikroniek, 54(3), 11–14.

Schroedter, R., Janschek, K., & Sandner, T. (2014). Jerk and Current Limited Flatness-based Open Loop Control of Foveation Scanning Electrostatic Micromirrors. In IFAC Proceedings Volumes (pp. 2685–2690). International Federation of Automatic Control. https://doi.org/10.3182/20140824-6-za-1003.02566

Steininger, J., & Schitter, G. (2014). Influence of the Photodetector Geometry on the Deflection Measurement in Atomic Force Microscopes. In Proceedings of the ASPE 2014 Annual Meeting (pp. 674–679).

Steininger, J., Paris, R., & Schitter, G. (2014). Improving the Deflection Readout Mechanism of an Atomic Force Microscope. In MESS14 Microelectronic Systems Symposium, Band 76 der OVE-Schriftenreihe (p. 22).

Steininger, J., Paris, R., & Schitter, G. (2014). Increasing sensitivity while reducing crosstalk of the force sensor in atomic force microscopes. In Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology (pp. 321–324). Euspen.

Yoo, H. W., van Royen, M. E., van Cappellen, W. A., Houtsmuller, A. B., Verhaegen, M., & Schitter, G. (2014). Automated Spherical Aberration Correction in Scanning Confocal Microscopy. Review of Scientific Instruments, 85(12), 123706. https://doi.org/10.1063/1.4904370

2022-12-07: book title and DOI corrected, editors, book information, chapter number and page numbers added /EK, Novak, P., Melik-Merkumians, M., Steinegger, M., Moser, T., Sindelar, R., & Zoitl, A. (2013). Extraction of Automation System Engineering Knowledge for Mapping Plant and Simulation Interfaces. In T. Borangi, A. Thomas, & D. Trentesaux (Eds.), Studies in Computational Intelligence (Vol. 472, pp. 247–261). Springer-Verlag, Berlin-Heidelberg. https://doi.org/10.1007/978-3-642-35852-4_16

Chang, P. I., Chavan, D., Paris, R., Iannuzzi, D., & Schitter, G. (2013). Towards High Speed Ferrule-Top Atomic Force Microscopy. In Proceedings of 6th IFAC Symposium on Mechatronic Systems (pp. 132–137).

Hametner, R., Kormann, B., Vogel-Heuser, B., Winkler, D., & Zoitl, A. (2013). Automated Test Case Generation for Industrial Control Applications. In Recent Advances in Robotics and Automation (pp. 263–273). Springer-Verlag, Berlin-Heidelberg. https://doi.org/10.1007/978-3-642-37387-9_20

Hametner, R., Schitter, G., Voigt, A., & Zoitl, A. (2013). Implementation Guidelines for Closed Loop Control Algorithms on PLCs. In 2013 IEEE International Conference on Industrial Technology (pp. 1297–1302).

Ito, S., Steininger, J., & Schitter, G. (2013). Influence of fine actuator stiffness in dual stage actuation on vibration isolation properties. In Proceedings of: Precision Control for Advanced Manufacturing Systems (pp. 126–130).

Ito, S., Steininger, J., Chang, P. I., & Schitter, G. (2013). High-precision Positioning System using a Low-stiffness Dual Stage Actuator. In Proceedings of 6th IFAC Symposium on Mechatronic Systems (pp. 20–27).

Janschek, K., Sandner, T., Schroedter, R., & Roth, M. (2013). Adaptive Prefilter Design for Control of Quasistatic Microscanners. In IFAC Proceedings Volumes (pp. 197–206). IFAC-PapersOnLine/Elsevier. https://doi.org/10.3182/20130410-3-cn-2034.00112

Kuiper, S., Van den Hof, P. M. J., & Schitter, G. (2013). Integrated designof the feedback controller and topography estimator for atomic force microscopy. Control Engineering Practice, 21(8), 1110–1120. https://doi.org/10.1016/j.conengprac.2013.03.006

Lepuschitz, W., Groessing, B., Merdan, M., & Schitter, G. (2013). Evaluation of a Multi-Agent Approach for a Real Transportation System. In 2013 IEEE International Conference on Industrial Technology (pp. 1273–1278).

Nahar, S. N., Schmets, A. J. M., Scarpas, A., & Schitter, G. (2013). Temperature and thermal history dependence of the microstructure in bituminous materials. European Polymer Journal, 49(8), 1964–1974. https://doi.org/10.1016/j.eurpolymj.2013.03.027

Nahar, S., Dillingh, B., Erkens, S., Schmets, A., Fischer, H. R., Scarpas, A., & Schitter, G. (2013). Is Atomic Force Microscopy suited as tool for fast screening of bituminous materials? An inter-laboratory comparison study. In TRB 92nd Annual Meeting Compendium of Papers (p. 16).

Nahar, S., Mohajeri, M., Schmets, A., Scarpas, A., Martin, V. de V., & Schitter, G. (2013). First Observation of Blending-Zone Morphology at Interface of Reclaimed Asphalt Binder and Virgin Bitumen. Transportation Research Record, 2370(1), 1–9. https://doi.org/10.3141/2370-01

Nahar, S., Schmets, A., Scarpas, A., & Schitter, G. (2013). Temperature induced healing in strained bituminous materials observed by atomic force microscopy. In Proceedings of the 4th International Conference on Self-Healing Materials (pp. 489–493).

Oldenbeuving, R. M., Song, H., Schitter, G., Verhaegen, M., Klein, E. J., Lee, C. J., Offerhaus, H. L., & Boller, K.-J. (2013). High precision wavelength estimation method for integrated optics. Optics Express, 21(14), 11.

Paris, R., Thurner, T., & Schitter, G. (2013). Compensation Based Displacement Measurement Using Objective Laser Speckles. In Proceedings of 6th IFAC Symposium on Mechatronic Systems (pp. 264–270).

Prostejovsky, A., Merdan, M., Schitter, G., & Dimeas, A. (2013). Demonstration of a Multi-Agent-Based Control System for Active Electric Power Distribution Grids. In Proceedings of the IEEE International Workshop on Intelligent Energy Systems (IWIES’13) (pp. 76–81).

Rodler, M., Melik-Merkumians, M., Lepuschitz, W., & Merdan, M. (2013). Visualization of an agent-based batch process system. In 2013 IEEE International Conference on Industrial Technology (ICIT). 2013 IEEE International Conference on Industrial Technology, Capetown, Südafrika, Non-EU. https://doi.org/10.1109/icit.2013.6505880

Schitter, G. (2013). Mechatronics and Instrumentation for High-Speed High-Resolution Imaging Systems. Microscopy at the Frontiers of Science 2013, Tarragona, Spain, EU.

Schitter, G. (2013). Precision Engineering for Mechatronic Imaging Systems. BioXneT, South Hampton, EU.

Schitter, G. (2013). Precision Engineering for Mechatronic Imaging Systems. Mini-Symposium on Control of Mechatronic Systems, Zürich, Schweiz, Non-EU.

Schitter, G. (2013). Präzisionstechnologie: Positionieren, Abbilden und Messen in der Hochtechnologie. Kolloquium der Fakultät Maschinenbau & Mechatronik, Deggendorf, Deutschland, EU.

Schitter, G. (2013). Towards Adaptive Optics in Confocal Scanning Laser Microscopy. Nano and Photonics 2013, Mauterndorf, Austria.

Steinegger, M., Zoitl, A., Fein, M., & Schitter, G. (2013). Design Patterns for Separating Fault Handling from Control Code in Discrete Manufacturing Systems. In Proc. of the 39th Annual Conference of the IEEE Industrial Electronics Society (pp. 4366–4371).

Steininger, J., Ito, S., & Schitter, G. (2013). Modellbasierte Regelung eines dual aktuierten Nano-Positioniersystems. 47. Regelungstechnisches Kolloquium in Boppard, Boppard, Deutschland, EU.

Thier, M., Paris, R., Thurner, T., & Schitter, G. (2013). Low-Latency Shack Hartmann Wavefront Sensor Based on an Industrial Smart Camera. IEEE Transactions on Instrumentation and Measurement, 62(5), 1241–1249. https://doi.org/10.1109/tim.2012.2223333

Yoo, H. W., Ito, S., Verhaegen, M., & Schitter, G. (2013). Transformation-based iterative learning control for non-collocated sensing of a galvanometer scanner. In 2013 European Control Conference (ECC). European Control Conference ECC 2013, Zürich, Non-EU. https://doi.org/10.23919/ecc.2013.6669311

van Loon, A., Keune, K., Dik, J., Kohl, D., Chang, P. I., & Schitter, G. (2013). Analytical Spectroscopy in Art and Archaeology. In Book of Abstracts - Technart 2013. Technart 2013, Amsterdam, Netherlands, EU.

Andren, F., Strasser, T., Zoitl, A., & Hegny, I. (2012). A Reconfigurable Communication Gateway for Distributed Embedded Control Systems. In IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society (pp. 3700–3706).

Hametner, R., Winkler, D., & Zoitl, A. (2012). Agile Testing Concepts Based on Keyword-driven Testing for Industrial Automation Systems. In IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society (pp. 3707–3712).

Hegny, I., Strasser, T., Melik-Merkumians, M., Wenger, M., & Zoitl, A. (2012). Towards an increased reusability of distributed control applications modeled in IEC 61499. In Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation (ETFA 2012). IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Prag, Czechia. https://doi.org/10.1109/etfa.2012.6489639

Ito, S., Steininger, J., Chang, P. I., & Schitter, G. (2012). Control of a long range high-precision positioning system. In Tagungsband GMA-Fachausschuss 1.30 “Modellbildung, Identifikation und Simualtion in der Automatisierungstechnik” (p. 56). Technische Universität Darmstadt Institut für Automatisierungstechnik und Mechatronik.

Kohl, D., Schitter, G., & Staufer, U. (2012). The Potential of Magnetic Force Microscopy for Investigating Nano-Phase Iron. Scientific Preparations for Lunar Exploration, Noordwjik, NL, EU.

Kohl, D., Schitter, G., & Staufer, U. (2012). The potential of magnetic force microscopy for in-situ investigation of nanophase iron in lunar dust. Planetary and Space Science, 74(1), 270–275. https://doi.org/10.1016/j.pss.2012.06.013

Koppensteiner, G., Schwingenschlögl, C., Merdan, M., & Zoitl, A. (2012). Implementation of an Event-based Low-Level Control for Mobile Robots. In Proceedings on the 19th International Conference on Mechatronics and Machine Vision in Practice (M2VIP12) (p. 6).

Kuiper, S., & Schitter, G. (2012). Model-Based Feedback Controller Design for Dual Actuated Atomic Force Microscopy Mechatronics. Mechatronics, 22(3), 327–337. https://doi.org/10.1016/j.mechatronics.2011.08.003

Kuiper, S., Van den Hof, P. M. J., & Schitter, G. (2012). Trade-off between the control bandwidth and the measurement accuracy in Atomic Force Microscopy. In Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC) (pp. 888–893).

Melik-Merkumians, M., Baier, T., Steinegger, M., Lepuschitz, W., Hegny, I., & Zoitl, A. (2012). Towards OPC UA as portable SOA Middleware between Control Software and External Added Value Applications. In Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies and Factory Automation (ETFA 2012) (p. 8).

Merdan, M., Vrba, P., & Melik-Merkumians, M. (2012). Test-Driven Agent-Oriented Software Development. In Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies and Factory Automation (ETFA 2012) (p. 8).

Merdan, M., Zoitl, A., Koppensteiner, G., & Melik-Merkumians, M. (2012). Adaptive Produktionssysteme durch den Einsatz von autonomen Softwareagenten. Elektrotechnik Und Informationstechnik : E & i, 129(1), 53–58. https://doi.org/10.1007/s00502-012-0071-7

Nahar, S., Schmets, A., Schitter, G., & Scarpas, A. (2012). Influence of thermal conditioning on microstructures of bituminous materials. International Conference on Scanning Probe Microscopy on Soft and Polymeric Materials, Netherlands, Rolduc, Kerkrade, EU.

Novák, P., Melik-Merkumians, M., Steinegger, M., Moser, T., Ŝindelář, R., & Zoitl, A. (2012). Semantic Runtime Interface Description Based on Engineering Knowledge. In IFAC Proceedings Volumes (pp. 805–810). https://doi.org/10.3182/20120523-3-ro-2023.00176

Paris, R., Thier, M., Thurner, T., & Schitter, G. (2012). ’Shack-Hartmann Wavefront Sensor based on an Industrial Smart Camera. In Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC) (pp. 1127–1132).

Paris, R., Thurner, T., Berndorfer, T., Yoo, H. W., & Schitter, G. (2012). Intelligente Kameras in der Messtechnik. Elektrotechnik Und Informationstechnik, 129(1), 34–41. https://doi.org/10.1007/s00502-012-0069-1

Schitter, G. (2012). Advanced Mechatronics for Mechatronic Imaging Systems and Precision Motion. Mechatronic Research Division, Veldhoven, Netherlands, EU.

Schitter, G. (2012). Advanced Mechatronics for Precision Motion and Mechatronic Imaging Systems. Minisymposium on Advanced Mechatronic Systems, Zürich, Schweiz, Non-EU.

Schitter, G. (2012). High-Speed Atomic Force Microscopy and Fast Mapping of Sample Properties at the Nanoscale. Uni Graz / TU Graz Kolloquium, Graz, Austria.

Schitter, G. (2012). High-speed AFM by mechatronic system integration. 2nd Workshop on Dynamics and Control of Micro and Nanoscale Systems, Newcastle, Australia, Non-EU.

Schitter, G., & Sebastian, A. (2012). Editorial Special issue on “‘Mechatronic systems for micro- and nanoscale applications.’” Mechatronics, 22(3), 239–240. https://doi.org/10.1016/j.mechatronics.2012.02.004

Schitter, G., Steininger, J., Heuck, F. C. A., & Staufer, U. (2012). Towards fast AFM-based nanometrology and nanomanufacturing. International Journal of Nanomanufacturing, 8(5/6), 392. https://doi.org/10.1504/ijnm.2012.051109

Steinegger, M., & Zoitl, A. (2012). Automated Code Generation for Programmable Logic Controllers based on Knowledge Acquisition from Engineering Artifacts: Concept and Case Study. In Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies and Factory Automation (ETFA 2012) (p. 8).

Steininger, J., Kuiper, S., Ito, S., & Schitter, G. (2012). Schnelle Rasterkraftmikroskopie durch moderne Regelungstechnik und mechatronische Systemintegration. Elektrotechnik Und Informationstechnik : E & i, 129(1), 28–33. https://doi.org/10.1007/s00502-012-0070-8

Wenger, M., & Zoitl, A. (2012). IEC 61131-3 Model for Model-Driven Development. In IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society (pp. 3724–3729). IEEE Industrial Electronics Society.

Wenger, M., & Zoitl, A. (2012). Re-Use of IEC 61131-3 Structured Text for IEC 61499. In Proceedings on International Conference on Industrial Technology (pp. 83–88).

Yoo, H. W., Ito, S., Verhaegen, M., & Schitter, G. (2012). Iterative Learning Control of a Galvanometer Scanner for Fast and Accurate Scanning Laser Microscopy. In Proceedings on Mechartonics 2012 (pp. 537–543).

Yoo, H. W., Schitter, G., & Verhaegen, M. (2012). Integrated Smart Microscopy. Smart Optics System 3rd Annual Meeting, Leiden, Netherlands, EU.

Yoo, H. W., Verhaegen, M., von Royen, M. E., & Schitter, G. (2012). Automated Adjustment of Aberration Correction in Scanning Confocal Microscopy. In Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC) (p. 6).

van Hulzen, J. R., Schitter, G., Van den Hof, P. M. J., & van Eijk, J. (2012). Dynamics, load balancing, and modal control of piezoelectric tube actuators. Mechatronics, 22(3), 282–294. https://doi.org/10.1016/j.mechatronics.2011.10.003

Biffl, S., Zoitl, A., & Steininger, H. (2011). Kollaboratives Engineering vereinfachen. All-Electronics.De, 1.

Hametner, R., Kormann, B., Vogel-Heuser, B., Winkler, D., & Zoitl, A. (2011). Test Case Generation Approach for Industrial Automation Systems. In Proceedings of the 5th International Conference on Automation, Robotics and Applications (pp. 57–62).

Hofmann, M., Rooker, M., & Zoitl, A. (2011). Improved Communication Model for an IEC 61499 Runtime Environment. In Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (p. 7).

Jungmann, R., Szabo, M. E., Schitter, G., Tang, R. Y.-S., Vashishth, D., Hansma, P. K., & Thurner, P. J. (2011). Local strain and damage mapping in single trabeculae during three-point bending tests. Journal of the Mechanical Behavior of Biomedical Materials, 4(4), 11.

Koppensteiner, G., Hametner, R., Paris, R., Moser Passani, A., & Merdan, M. (2011). Knowledge Driven Mobile Robots Applied in the Disassembly Domain. In Proceedings of the 5th International Conference on Automation, Robotics and Applications (pp. 52–56).

Kormann, B., Vogel-Heuser, B., Hametner, R., & Zoitl, A. (2011). Engineering Process for an Online Testing Process of Control Software in Production Systems. In Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (p. 4).

Kuiper, S., & Schitter, G. (2011). Improving the Imaging Speed of AFM with Modern Control Techniques. In E. Eleftheriou & S. O. R. Moheimani (Eds.), Control Technologies for Emerging Micro and Nanoscale Systems (pp. 83–100). Springer-Verlag, Berlin-Heidelberg. https://doi.org/10.1007/978-3-642-22173-6_5

Kuiper, S., Van den Hof, P. M. J., & Schitter, G. (2011). Integrated Design of the Feedback Controller and Topography Estimator in Atomic Force Microscopy. In Book of Abstracts. 30th Benelux Meeting on Systems and Control, Lommel, Belgium, EU.

Kuiper, S., Van den Hof, P. M. J., & Schitter, G. (2011). Towards Integrated Design of a Robust Feedback Controller and Topography Estimator for Atomic Force Microscopy. In IFAC Proceedings Volumes (pp. 12709–12714). https://doi.org/10.3182/20110828-6-it-1002.01619

Leonhardsberger, W., & Zoitl, A. (2011). Using EtherNet/IP with IEC 61499 Communication Function Blocks. In 5th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2011, Toulouse, France, August 29-31, 2011, Proceedings (pp. 39–49). Springer.

Lepuschitz, W., Zoitl, A., & Merdan, M. (2011). Ontology-Driven Automated Software Configuration for Manufacturing System Components. In Proceedings of the 2011 IEEE International Conference on Systems, Man and Cybernetics (pp. 427–433).

Lepuschitz, W., Zoitl, A., Vallée, M., & Merdan, M. (2011). Toward Self-Reconfiguration of Manufacturing Systems Using Automation Agents. IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews), 41(1), 52–69. https://doi.org/10.1109/tsmcc.2010.2059012

Merdan, M., Vallee, M., Lepuschitz, W., & Zoitl, A. (2011). Monitoring and diagnostics of industrial systems using automation agents. International Journal of Production Research, 49(5), 1497–1509. https://doi.org/10.1080/00207543.2010.526368

Moser, T., Mordinyi, R., Winkler, D., Melik-Merkumians, M., & Biffl, S. (2011). Efficient automation systems engineering process support based on semantic integration of engineering knowledge. In Z. Mammeri & R. Zurawski (Eds.), ETFA2011. https://doi.org/10.1109/etfa.2011.6059098

Nahar, S., Schitter, G., Schmets, A., & Scarpas, A. (2011). Engineering the Intrinsic Self-healing Capacity of Bituminous Materials. 6th IOP Symposium on Self Healing Materials, Gouda, Netherlands, EU.

Novak, P., & Sindelar, R. (2011). Integrated Design of Simulation Models for Passive Houses. In T. Moser, H. Koziolek, R. Mordinyi, M. Schleipen, & A. Zoitl (Eds.), Proceedings of First Workshop on Industrial Automation Tool Integration for Engineering Project Automation (iATPA 2011) (pp. 1–6).

Schimmel, A., & Zoitl, A. (2011). Distributed Online Change for IEC 61499. In Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (p. 7).

Schitter, G. (2011). Atomic Force Microscopy in Real-Time. Nano and Photonics 2011, Mauterndorf, Austria.

Song, H., Fraanje, R., Schitter, G., Kroese, H., Vdovin, G., & Verhaegen, M. (2011). Model-based aberration correction in a closed-loop wavefront-sensor-less adaptive optics system. Virtual Journal for Biomedical Optics, 6 AUSGABE 1, 15.

Song, H., Fraanje, R., Schitter, G., Vdovin, G., & Verhaegen, M. (2011). Controller Design for a High-Sampling-Rate Closed-Loop Adaptive Optics System with Piezo-Driven Deformable Mirror. European Journal of Control, 17(3), 290–301. https://doi.org/10.3166/ejc.17.290-301

Strasser, T., Zoitl, A., & Rooker, M. (2011). Zero-Downtime Reconfiguration of Distributed Control Logic in Industrial Automation and Control. In M. Khalgui & H.-M. Hanisch (Eds.), Reconfigurable Embedded Control Systems: Applications for Flexibility and Agility (pp. 55–81). IGI Global. https://doi.org/10.4018/978-1-60960-086-0.ch003

Strasser, T., Zoitl, A., Christensen, J. H., & Sünder, C. (2011). Design and Execution Issues in IEC 61499 Distributed Automation and Control Systems. IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews), 41(1), 41–51. https://doi.org/10.1109/tsmcc.2010.2067210

Sunindyo, W. D., Melik-Merkumians, M., Moser, T., & Biffl, S. (2011). Enforcing Safety Requirements for Industrial Automation System at Runtime - Position Paper. In Proceedings of 2nd International Workshop on Requirements@Run.Time (RE@RunTime 2011) (pp. 37–42).

Wenger, M., Hametner, R., Zoitl, A., & Voigt, A. (2011). Industrial Embedded Model Predictive Controller Platform. In Proceedings of the 16th IEEE International Conference on Emerging Technologies and Factory Automation (p. 4).

Wenger, M., Melik-Merkumians, M., Hegny, I., Hametner, R., & Zoitl, A. (2011). Utilizing IEC 61499 in an MDA Control Application Development Approach. In 2011 IEEE Conference on Automation, Science and Engineering, August 24-27,2011, Trieste, Italy, Proceedings (pp. 495–500).

Zoitl, A. (2011). A Control Architecture for Self-reconfigurable Production Systems. 5th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, France, Toulouse, EU.

Zoitl, A. (2011). EtherNet/IP as communication infrastructure for distributed control applications. IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Prag, Czechia.

Zoitl, A. (2011). IEC 61499 current status and near future developments. IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Prag, Czechia.

Zoitl, A. (2011). Overview & Update. IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Prag, Czechia.

Zoitl, A. (2011). Supervisory control of an injection molding machine. IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Prag, Czechia.

Zoitl, A., & Prähofer, H. (2011). Building Hierarchical Automation Solutions in the IEC 61499 Modeling Language. In USB Proceedings INDIN 2011 2011 9th IEEE International Conference on Industrial Informatics (pp. 557–564). IEEE Industrial Electronics Society.

Froschauer, R., Zoitl, A., & Rooker, M. (2010). FRONTICS - A Communication Framework for Networked Automation and Control Systems. In Preprints 10th IFAC Workshop on Intelligent Manufacturing Systems (IMS’10) (p. 6). Faculdade de Ciencias e Technologia, Universidade Nova de Lisboa.

Hametner, R., Winkler, D., Östreicher, T., Biffl, S., & Zoitl, A. (2010). The Adaption of Test-Driven Software Processes to Industrial Automation Engineering. In Proceedings INDIN 2010 - 8th IEEE International Conference on Industrial Informatics (p. 7).

Hametner, R., Zoitl, A., & Semo, M. (2010). Automation Component Architecture for the Efficient Development of Industrial Automation Systems. In 6th annual IEEE Conference on Automation Science and Engineering (IEEE CASE 2010) (p. 6). IEEE.

Hegny, I., & Zoitl, A. (2010). Component-based Simulation Framework for Production Systems. In USB Proceedings ICIT 2010 (p. 6).

Hegny, I., Wenger, M., & Zoitl, A. (2010). IEC 61499 based Simulation Framework for Model-Driven Production Systems Development. In Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010) (p. 8).

Kuiper, S., & Schitter, G. (2010). Active damping of a piezoelectric tube scanner using self-sening piezo actuation. Mechatronics, 20, 656–665.

Kuiper, S., Fleming, A. J., & Schitter, G. (2010). Dual Actuation for High Speed Atomic Force Microscopy. In Proceedings of the 5th IFAC Symposium on Mechatronic Systems (pp. 220–226).

Lepuschitz, W., Vallee, M., Zoitl, A., & Merdan, M. (2010). Online Reconfiguration of the Low Level Control for Automation Agents. In CDROM Proceedings IECON 2010 36th Annual Conference of the IEEE Industrial Electronics Society (pp. 1359–1364).

Melik-Merkumians, M., Moser, T., Schatten, A., Zoitl, A., & Biffl, S. (2010). Knowledge-based Runtime Failure Detection for Industrial Automation Systems. In Proceedings of the 5th Workshop on Models@run.time at the ACM/IEEE 13th International Conference on Model Driven Engineering Languages and Systems (p. 12).

Melik-Merkumians, M., Wenger, M., Hametner, R., & Zoitl, A. (2010). Increasing Portability and Reuseability of Distributed Control Programs by I/0 Access Abstraction. In Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010) (p. 4).

Melik-Merkumians, M., Zoitl, A., & Moser, T. (2010). Ontology-based fault diagnosis for industrial control applications. In 2010 IEEE 15th Conference on Emerging Technologies & Factory Automation (ETFA 2010). IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Prag, Czechia. https://doi.org/10.1109/etfa.2010.5641192

Merdan, M., Zoitl, A., Koppensteiner, G., & Demmelmayr, F. (2010). Semantische Technologien - Stand der Technik. Elektrotechnik Und Informationstechnik : E & i, 127(10), 291–299.

Oates, C., & Zoitl, A. (2010). Utilizing Lego Mindstorms as a Teaching Platform for Industrial Automation. AT&P Journal Plus, 2, 74–78.

Oates, C., & Zoitl, A. (2010). Utilizing Lego Mindstorms as a Teaching Platform for Industrial Automation. In Proceedings of the 1st International Conference Robotics in Education (p. 6).

Schimmel, A., & Zoitl, A. (2010). Real-Time Communication for IEC 61499 in Switched Ethernet Networks. In Proceedings of ICUMT-T, ICUMT-CS and associated workshops (p. 6).

Schimmel, A., Zoitl, A., Froschauer, R., Rooker, M., & Ebenhofer, G. (2010). Model-Driven Communication Routing in Industrial Automation and Control Systems. In Proceedings INDIN 2010 - 8th IEEE International Conference on Industrial Informatics (p. 6). IEEE Conference Proceedings.

Song, H., Fraanje, R., Schitter, G., Kroese, H., Vdovin, G., & Verhaegen, M. (2010). Model-based aberration correction in a closed-loop wavefront-sensor-less adaptive optics system. Optics Express, 18(23).

Song, H., Fraanje, R., Schitter, G., Vdovin, G., & Verhaegen, M. (2010). Modeling and Control of a Nonlinear Dynamic Adaptive Optics System. In Proceedings of the 5th IFAC Symposium on Mechatronic Systems (pp. 299–305).

Strasser, T., Zoitl, A., & Ebenhofer, G. (2010). 4DIAC - Ein Open Source Framework für verteilte industrielle Automatisierungs- und Steuerungssysteme. In Proceedings Informatik 2010 Service Science Band 1 (p. 12).

Waltersdorfer, F., Moser, T., Zoitl, A., & Biffl, S. (2010). Version Management and Conflict Detection Across Heterogeneous Engineering Data Models. In Proceedings INDIN 2010 - 8th IEEE International Conference on Industrial Informatics (p. 8).

Wenger, M., Hametner, R., & Zoitl, A. (2010). IEC 61131-3 control applications vs. control applications transformed in IEC 61499. In Preprints 10th IFAC Workshop on Intelligent Manufacturing Systems (IMS’10) (p. 6).

Wenger, M., Zoitl, A., Froschauer, R., Rooker, M., Ebenhofer, G., & Strasser, T. (2010). Model-driven Engineering of Networked Industrial Automation Systems. In Proceedings INDIN 2010 - 8th IEEE International Conference on Industrial Informatics (p. 6).

Zoitl, A. (2010). 4DIAC Initiative near future plans. IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Prag, Czechia.

Zoitl, A. (2010). MT15 near future plans. IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Prag, Czechia.

Zoitl, A. (2010). Utilizing Lego Mindstorms nxt(tm) as teaching and training platform for IEC 61499. IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Prag, Czechia.

Zoitl, A., & Sünder, C. (2010). Verteilte Intelligenz. In Unternehmerische Eigensynergie für Produktionstechnologien oder die Überwindung des starren Taylorismus (pp. 118–121). Shaker Verlag.

Zoitl, A., Lepuschitz, W., Merdan, M., & Vallee, M. (2010). A Real-Time Reconfiguration Infrastructure for Distributed Embedded Control Systems. In Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010) (p. 8).

Zoitl, A., Strasser, T., & Valentini, A. (2010). Open Source Initiatives as basis for the Establishment of new Technologies in Industrial Automation: 4DIAC a Case Study. In Proceedings of the 2010 IEEE International Symposium on Industrial Electronics (p. 3). 2010 IEEE.

van Hulzen, J. R., Schitter, G., Van den Hof, P. M. J., & van Eijk, J. (2010). Dynamics and Modal Control of Piezoelectric Tube Actuators. In Proceedings of the 5th IFAC Symposium on Mechatronic Systems (pp. 317–323).

Zoitl, A., & Vyatkin, V. (2009). Different perspectives [IEC 61499 Architecture for Distributed Automation: The “Glass Half Full” View]. IEEE Industrial Electronics Magazine, 3(4), 7–23. https://doi.org/10.1109/MIE.2009.934789

Biffl, S., Schatten, A., & Zoitl, A. (2009). Integration of Heterogeneous Engineering Environments for the Automation Systems Lifecycle. In INDIN 2009 7th International Conference on Industrial Informatics (p. 6). IEEE.

Froschauer, R., Auinger, F., Schimmel, A., & Zoitl, A. (2009). Engineering of Communication Links with AADL in IEC 61499 Automation and Control Systems. In INDIN 2009 7th International Conference on Industrial Informatics (p. 6). IEEE.

Froschauer, R., Zoitl, A., & Grünbacher, P. (2009). Development and Adaptation of IEC 61499 Automation and Control Applications with Runtime Variability Models. In INDIN 2009 7th International Conference on Industrial Informatics (p. 6). IEEE.

Hegny, I., Zoitl, A., & Lepuschitz, W. (2009). Integration of simulation in the development process of distributed IEC 61499 control applications. In Proceedings 2009 IEEE International Conference on Industrial Technology (p. 6).

Krapfenbauer, H., Ertl, D., Zoitl, A., & Kupzog, F. (2009). Improving Component Testing of Industrial Automation Software. In 2009 Fourth International Multi-Conference on Computing in the Global Information Technology. The Fourth International Multi-Conference on Computing in the Global Information Technology ICCGI 2009, Cannes/La Bocca, France, EU. https://doi.org/10.1109/iccgi.2009.46

Lepuschitz, W., & Zoitl, A. (2009). Integration of a Distributed Control System based on IEC 61499 with Industrial Batch Management Systems. In Preprints of the 13th IFAC Symposium on Information Control Problems in Manufacturing (p. 6).

Lepuschitz, W., Königseder, F., & Zoitl, A. (2009). Conjunction of a Distributed Control System based on IEC 61499 with a Commercial Batch Management System. In 2009 IEEE Conference on Emerging Technologies & Factory Automation (p. 8).

Marik, V., Strasser, T., & Zoitl, A. (Eds.). (2009). Holonic and Multi-Agent Systems for Manufacturing. Springer.

Rooker, M., Strasser, T., Pichler, A., Stübl, G., Zoitl, A., & Terzic, I. (2009). Adaptive and Reconfigurable Control Framework for the Responsive Factory. In INDIN 2009 7th International Conference on Industrial Informatics (p. 6). IEEE.

Strasser, T., Rooker, M., Hegny, I., Wenger, M., Zoitl, A., Ferrarini, L., Dede, A., & Colla, M. (2009). A Research Roadmap for Model-Driven Design of Embedded Systems for Automation Components. In INDIN 2009 7th International Conference on Industrial Informatics (p. 6).

Terzic, I., Zoitl, A., Rooker, M., Strasser, T., Vrba, P., & Marik, V. (2009). Usability of Multi-agent Based Control Systems in Industrial Automation. In Holonic and Multi-Agent Systems for Manufacturing (pp. 25–36). Springer Berlin Heidelberg.

Wenger, M., Zoitl, A., Sünder, C. K., & Steininger, H. (2009). Semantic correct transformation of IEC 61131-3 models into the IEC 61499 standard. In 2009 IEEE Conference on Emerging Technologies & Factory Automation (p. 7). IEEE Conference Proceedings.

Wenger, M., Zoitl, A., Sünder, C. K., & Steininger, H. (2009). Transformation of IEC 61131-3 to IEC 61499 based on a model driven development approach. In Proceedings 7th IEEE International Conference on Industrial Informatics (p. 6).

Zeichen, G., & Zoitl, A. (2009). Industrielle Adaptivität und Nichtlineare Mehrgrössenregelungen.

Zoitl, A., Hegny, I., & Schimmel, A. (2009). Utilizing Binary XML Respresentations for Improving the Performance of the IEC 61499 Configuration Interface. In INDIN 2009 7th International Conference on Industrial Informatics (p. 6). IEEE.

Zoitl, A., Strasser, T., Sünder, C., & Baier, T. (2009). Is IEC 61499 in Harmony with IEC 61131-3. IEEE Industrial Electronics Magazine, 3(4), 49–55. https://doi.org/10.1109/MIE.2009.934797

Brennan, R. W., Vrba, P., Tichy, P., Zoitl, A., Sünder, C. K., Strasser, T., & Marik, V. (2008). Developments in dynamic and intelligent reconfiguration of industrial automation. Computers in Industry, 59, 15.

Fritsche, J., Steininger, H., Sünder, C. K., & Zoitl, A. (2008). Kein Entweder-Oder! Computer&Automation, CONTROL GUIDE S2, 16–21.

Hegny, I., Hummer-Koppendorfer, O., Zoitl, A., Koppensteiner, G., & Merdan, M. (2008). Integrating Software Agents and IEC 61499 Realtime Control for Reconfigurable Distributed Manufacturing Systems. In Proceedings IEEE Third Symposium on Industrial Embedded Systems SIES’2008 (p. 4).

Koppensteiner, G., Merdan, M., Zoitl, A., & Favre-Bulle, B. (2008). Ontology-based Resource Allocation in Distributed Systems using Director Facilitator Agents. In Proceedings 2008 IEEE International Symposium on Industrial Electronics (p. 6).

Lepuschitz, W., & Zoitl, A. (2008). An Engineering Method for Batch Process Automation using a Component Oriented Design based on IEC 61499. In Proceedings IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (p. 8).

Merdan, M., Koppensteiner, G., Zoitl, A., & Hegny, I. (2008). Intelligent-Agent based Approach for Assembly Automation. In Proceedings 2008 IEEE Conference on Soft Computing in Industrial Applications SMCia/08 (p. 7). IEEE Conference Proceedings.

Merdan, M., Vrba, P., Koppensteiner, G., & Zoitl, A. (2008). Knowledge-based Multi-Agent Architecture for Dynamic Scheduling in Manufacturing Systems. In Proceedings IEEE INDIN 2008 (pp. 1075–1080).

Merdan, M., Zoitl, A., & Demmelmayr, F. (2008). Roadmap zur Migration von KMUs in Richtung semantischer wissensbasierter Systeme.

Strasser, T., Rooker, M., Ebenhofer, G., Zoitl, A., Sünder, C. K., Valentini, A., & Martel, A. (2008). Framework for Distributed Industrial Automation and Control (4DIAC). In Proceedings IEEE INDIN 2008 (pp. 283–288).

Strasser, T., Rooker, M., Ebenhofer, G., Zoitl, A., Sünder, C. K., Valentini, A., & Martel, A. (2008). Structuring of Large Scale Distributed Control Programs with IEC 61499 Subapplications and a Hierarchical Plant Structure Model. In Proceedings IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (p. 8).

Strasser, T., Rooker, M., Zoitl, A., & Hegny, I. (2008). Modellbasierte Entwicklung von eingebetteten Systemen in der Automatisierungsindustrie. Internationales Forum Mechatronik, Linz, Austria.

Strasser, T., Rooker, M., Zoitl, A., & Sünder, C. K. (2008). Komponenten- und modellbasierte Entwicklung von Steuerungssoftware für mechatronische Ansätze. Industrielles Symposium Mechatronik, Linz, Austria.

Sünder, C. K., Zoitl, A., Christensen, J. H., Steininger, H., & Fritsche, J. (2008). Considering IEC 61131-3 and IEC 61499 in the context of Component Frameworks. In Proceedings IEEE INDIN 2008 (pp. 277–282).

Sünder, C. K., Zoitl, A., Hummer-Koppendorfer, O., Strasser, T., Ebenhofer, G., Rooker, M., & Kerbleder, G. (2008). 4DIAC-Framework for Distributed Industrial Automation Control. In 10. Fachtagung EKA 2008 Entwurf komplexer Automatisierungssysteme (pp. 163–174). Institut für Automation und Kommunikation, Magdeburg.

Sünder, C. K., Zoitl, A., Steininger, H., & Fritsche, J. (2008). Symbiose von IEC 61131-3 und IEC 61499: Integration von scheinbar sehr unterschiedlichen Welten. In 10. Fachtagung EKA 2008 Exntwurf komplexer Automatisierungssysteme (pp. 185–196). Institut für Automation und Kommunikation, Magdeburg.

Terzic, I., Merdan, M., Zoitl, A., & Hegny, I. (2008). Modular Assembly Machine - Ontology Based Concept. In Proceedings IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (p. 4). IEEE Press.

Terzic, I., Zoitl, A., Favre-Bulle, B., & Strasser, T. (2008). A Survey of Distributed Intelligence in Automation in European Industry, Research and Market. In Proceedings IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (p. 8).

Zeichen, G., Favre-Bulle, B., Zoitl, A., & Prenninger, J. (2008). Kriterien für die Exzellenz der Produktion. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 103(5), 328–332.

Zeichen, G., Zoitl, A., & Prenninger, J. (2008). Systemtechnologien für Produktionssysteme. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 103(9), 589–593.

Zoitl, A. (2008). Real-Time Execution for IEC 61499. International Society of Automation.

Zoitl, A., & Strasser, T. (2008). Auf dem Weg in die Anwendung. Computer&Automation, 11, 70–76.

Grabmair, G., Zoitl, A., Strasser, T., & Froschauer, R. (2007). Modelling Real-time Constraints Regarding Reconfiguration Aspects for IEC 61499 Control Applications. In Conference Proceedings INDIN 2007 (pp. 1135–1140).

Hall, K., Staron, R., & Zoitl, A. (2007). Challenges to Industry Adoption of the IEC 61499 Standard on Event-based Function blocks. In INDIN 2007 Conference Proceedings (pp. 823–828).

Hegny, I., Holzer, R., Grabmair, G., Zoitl, A., Auinger, F., & Wahlmüller, E. (2007). A Distributed Energy Management Approach for Autonomous Power Supply Systems. In INDIN 2007 Conference Proceedings (pp. 1111–1116).

Merdan, M., Koppensteiner, G., Zoitl, A., & Favre-Bulle, B. (2007). Distributed Agents Architecture Applied in Assembly Domain. In Proceedings of the eighth International Symposium on Knowledge and Systems Sciences (KSS’2007) (pp. 128–133).

Merdan, M., Zoitl, A., Hegny, I., & Favre-Bulle, B. (2007). Einsatzanalyse von RFID-Technologie in KMU. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 102(9), 587–593.

Rooker, M., Sünder, C. K., Strasser, T., Zoitl, A., Hummer-Koppendorfer, O., & Ebenhofer, G. (2007). Zero Downtime Reconfiguration of Distributed Automation Systems: The eCEDAC Approach. In Holonic and Multi-Agent Systems for Manufacturing (pp. 326–337).

Steininger, H., Strasser, T., Sünder, C. K., & Zoitl, A. (2007). Die rekonfigurierbare Fertigung. Computer&Automation, 11, 54–60.

Strasser, T., Sünder, C. K., Rooker, M., Hummer-Koppendorfer, O., Zoitl, A., & Müller, I. (2007). Enhanced IEC 61499 System Model for Evolution of Control Applications in Distributed Industrial-Process Measurement and Control Systems. In Proceedings of the European Control Conference (p. 8).

Strasser, T., Sünder, C. K., Zoitl, A., Rooker, M., & Brunnenkreef, J. E. J. (2007). Enhanced IEC 61499 Device Management Execution and Usage for Downtimeless Reconfiguration. In Conference Proceedings INDIN 2007 (pp. 1163–1168).

Sünder, C. K., Zoitl, A., Christensen, J. H., Colla, M., & Strasser, T. (2007). Execution Models for the IEC 61499 elements Composite Function Block and Subapplication. In Conference Proceedings INDIN 2007 (pp. 1169–1175).

Sünder, C. K., Zoitl, A., Rofner, H., Strasser, T., & Brunnenkreef, J. E. J. (2007). Benchmarking of IEC 61499 runtime environments. In 12th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2007) (p. 8). IEEE Conference Proceedings.

Weehuizen, F., & Zoitl, A. (2007). Using the CIP Protocol with IEC 61499 Communication Function Blocks. In INDIN 2007 Conference Proceedings (pp. 261–265).

Zoitl, A., Grabmair, G., Smodic, R., & Strasser, T. (2007). An Execution Environment for Real-Time Constrained Control Software based on IEC 61499. In Conference Proceedings INDIN 2007 (pp. 1117–1122).

Zoitl, A., Strasser, T., Hall, K., Staron, R., Sünder, C. K., & Favre-Bulle, B. (2007). The Past, Present, and Future of IEC 61499. In Holonic and Multi-Agent Systems for Manufacturing (pp. 1–14).

Zoitl, A., Sünder, C. K., Strasser, T., & Colla, M. (2007). A Device and Resource Execution Model for IEC 61499 Control Devices. In Conference Proceedings INDIN 2007 (pp. 1143–1149).

Favre-Bulle, B., & Zoitl, A. (2006). Adaptive Produktionssysteme - Ein zukunftssicheres Konzept für die Europäische Produktion. Industrie Management, 2, 45–48.

Favre-Bulle, B., Zoitl, A., & Dutzler, C. (2006). Zukunftstrends der Automatisierungstechnik und die Bedeutung von adaptiven Produktionssystemen. Elektrotechnik Und Informationstechnik, 5, 172–177.

Grabmair, G., Froschauer, R., Strasser, T., & Zoitl, A. (2006). Modelling Execution Order and Real-time Constraints in IEC 61499 Control Applications. In 2006 IEEE Workshop on Distributed Intelligent Systems (pp. 115–126). IEEE Computer Society.

Hummer-Koppendorfer, O., Sünder, C. K., Zoitl, A., Strasser, T., Rooker, M., & Ebenhofer, G. (2006). Towards Zero-downtime Evolution of Distributed Control Applications via Evolution Control based on IEC 61499. In ETFA 2006 Proceedings (pp. 1285–1292).

Merdan, M., Kordic, V., Zoitl, A., & Lazinica, A. (2006). Knowledge-based Multi-agent Architecture. In CIMCA’2006. International Conference on Computational Intelligence for Modelling Control and Automation 2006, Sydney, Australia, Non-EU.

Smodic, R., Zoitl, A., Grabmair, G., & Strasser, T. (2006). A Real-Time Execution Model for IEC 61499 based Control Applications. In incom 2006, Information Systems, Control and Interoperability. 12th IFAC Symposium on Information Control Problems in Manufacturing, Saint Etienne, Frankreich, EU.

Strasser, T., Müller, I., Schüpany, M., Ebenhofer, G., Mungenast, R., Sünder, C. K., Zoitl, A., Hummer-Koppendorfer, O., Thomas, S., & Steininger, H. (2006). An Advanced Engineering Environment for Distributed & Reconfigurable Industrial Automation & Control Systems based on IEC 61499. In IPROMS2006 Intelligent Production Machines and Systems (pp. 493–498).

Strasser, T., Müller, I., Zoitl, A., Sünder, C. K., & Grabmair, G. (2006). Verteilte, rekonfigurierbare Automatisierungssysteme im Produktionsbereich. Industrie Management, 2, 33–36.

Sünder, C. K., Favre-Bulle, B., & Zoitl, A. (2006). Verteilt automatisieren. Computer&Automation, 3, 32–36.

Sünder, C. K., Zoitl, A., & Dutzler, C. (2006). Functional structure-based modelling of automation systems. International Journal of Manufacturing Research, 1(4), 405–420.

Sünder, C. K., Zoitl, A., Christensen, J. H., Vyatkin, V., Brennan, R. W., Valentini, A., Ferrarini, L., Strasser, T., Martinez-Lastra, J. L., & Auinger, F. (2006). Usability and Interoperability of IEC 61499 based distributed automation systems. In Integrating Manufacturing and Services Systems (pp. 31–37). https://doi.org/10.1109/INDIN.2006.275713

Sünder, C. K., Zoitl, A., Favre-Bulle, B., Strasser, T., Steininger, H., & Thomas, S. (2006). Towards Reconfiguration Applications as basis for Control System Evolution in Zero-downtime Automation Systems. In IPROMS2006 Intelligent Production Machines and Systems (pp. 523–528).

Sünder, C. K., Zoitl, A., Mehofer, F., & Favre-Bulle, B. (2006). Advanced use of PLCopen motion control library for autonomous servo drives in IEC 61499 based automation and control systems. Elektrotechnik Und Informationstechnik : E & i, 5, 191–196.

Sünder, C. K., Zoitl, A., Rainbauer, M., & Favre-Bulle, B. (2006). Hierarchical Control Modelling Architecture for Modular Distributed Automation Systems. In Integrating Manufacturing and Services Systems (pp. 12–17).

Weehuizen, F., Zoitl, A., & Sünder, C. K. (2006). CIP as a Transport Layer for IEC 61499 Industrial Communication Function Blocks. 11th IEEE International Conference on Emerging Technologies and Factory Automation 2006, Prag, Czechia.

Zoitl, A., Smodic, R., Sünder, C. K., & Grabmair, G. (2006). Enhanced Real-Time Execution of Modular Control Software based on IEC 61499. In Proceedings 2006 IEEE International Conference on Robotics and Automation, Orlando, Florida, USA (pp. 327–332). IEEE Press.

Zoitl, A., Sünder, C. K., & Terzic, I. (2006). Dynamic Reconfiguration of Distrubuted Control Applications with Reconfiguration Services based on IEC 61499. In 2006 IEEE Workshop on Distributed Intelligent Systems (pp. 109–114). IEEE Computer Society.

Hummer-Koppendorfer, O., Terzic, I., Zoitl, A., & Strasser, T. (2005). Development of an Extensible Engineering Support Tool for IEC 61499 Considering WYSIWYG GUI Building as Example. In Proceedings of the 10th IEEE International Conference on Emerging Technologies and Factory Automation ( ETFA 2005). IEEE Press.

Merdan, M., Terzic, I., Zoitl, A., & Favre-Bulle, B. (2005). Intelligent Reconfiguration Using Knowledge Based Agent System. In Proceedings ETFA 2005 (pp. 1051–1054).

Strasser, T., Müller, I., Zoitl, A., Sünder, C. K., & Grabmair, G. (2005). A Distributed Control Environment for Reconfigurable Manufacturing. In IPROMS 2005 Conference (p. 6). IPROMS.

Strasser, T., Zoitl, A., Auinger, F., & Sünder, C. K. (2005). Towards Engineering Methods for Reconfiguration of Distributed Real-Time Control Systems Based on the Reference Model of IEC 61499. In Holonic and Multi-Agent Systems for Manufacturing (pp. 165–175).

Sünder, C. K., Zoitl, A., Strasser, T., & Favre-Bulle, B. (2005). Intuitive Control Engineering for Mechatronic Components in Distributed Automation Systems based on the reference model of IEC 61499. In Proceedings INDIN2005. INDIN2005 3rd International IEEE Conference on Industrial Informatics, Perth, Australia, Austria.

Zoitl, A., Grabmair, G., Auinger, F., & Sünder, C. K. (2005). Executing real-time constrained Control Applications modelled in IEC 61499 with respect to Dynamic reconfiguration. In Proceedings INDIN2005. INDIN2005 3rd International IEEE Conference on Industrial Informatics, Perth, Australia, Austria.

Schitter, G., Allgöwer, F., & Stemmer, A. (2004). A new control strategy for high-speed atomic force microscopy. Nanotechnology, 15, 108–114.

Schitter, G., Scarpas, A., & Allgöwer, F. (2004). Robust two-degree-of-freedom control of an atomic force microscope. Asian Journal of Control, 6(2), 156–163.

Stark, R., Schitter, G., Stark, M., Guckenberger, R., & Stemmer, A. (2004). State space model of freely vibrating and surface-coupled cantilever dynamics in atomic force microscopy. Physical Review B, 69.