NameThemaYear
Benedikt KROPATSCHEKInfluence of the alloying elements Fe, Cr and Co on the stabilisation of the beta phase in Ti-Cu alloys: microstructure and mechanical properties 
Florian BACHERDevelopment of a targeted heat treatment by investigating the influence of the solution heat treatment temperature and the heating rate for additively manufactured Ti-6.5Cu-4Cr(-2Fe) alloys2024
Patrick WITTHALMEffects of different heat treatments on the microstructure, mechanical properties and phase development of additively manufactured Ti-Cu-based alloys2024
Matthias KIRALYHIDITi-MMCs with high specific stiffness for additive manufacturing: a comparison of methods2024
Timotheus WOLFSuppression of columnar crystal growth in Ti alloys2023
Alessa SCHEUCHReclamation of NbC/Ni hardmetals using the Zn reclaim process2023
Nikolas MITTERLECHNERProduction and characterisation of new Ti alloys for biomedical applications2023
Maximilian PFEIFFERStructural investigations of Ti-Cu-based alloys2022
Lukas STARKTi alloys for 3D printing2021
Martina BAUMPhase constitution in the Co-Ni-Al-W-C system2021
Fabio SCHIMMELBinder properties in W heavy metals2021
Julian KALLINGERInfluence of heat treatment on the binder properties in W heavy metals2021
Elisabeth BALLOKInfluence of carbon in Co-Ni-Al-W superalloys2021
Andreas WALLMÜLLERAblative cooling of the combustion chamber and nozzle of a liquid propellant rocket2021
Dominik FUCHSProduction and characterisation of multicomponent alloys2020
Peter STEINSCHADENCarbon fibre reinforced metal matrix composites2019
Alexander OTTEMechanical properties of low-melting solders2019
Stefanie ALLWORTHCharacterisation of low-melting solder alloys2019
Georg HATZLHigh entropy alloys in WC-Cermets2019
Gernot FROSCHAUERHigh-performance heat-conducting composites with low-melting matrix alloys2018
Markus LUNZERSolder materials for thermal management applications2018
Maximilian WOLFHard metals with precipitation-hardened binder2018
Simon SCHERRERProduction of bio-inspired metal matrix composites2017
Christoph FELDBAUMERMechanical properties of Al/diamond MMCs2017
Felix EDERProduction of highly porous nickel bodies with an graded pore structure2017
Felix FRANKRecycling of W-containing materials2017
Benjamin MEIXNERHighly porous Al bodies with graded pore structure by salt templating2017
Johannes EßMEISTERRadially graded pore structure in porous Ni bodies2017
Niklas BODENMÜLLERHighly porous Ni and Ni-ceramic composites with directional pore structure2017
Barbara OSINGERPreparation and characterisation of porous ZrO2-Ni-composite materials2016
Maximilian KLAMMCemented carbide-diamond composite materials2016
Markus HOFERWear behaviour of Al-, Fe-, and Ni-MMCs2015
Dilan ADLIMInternal oxidation of Ag alloys2015
Christina DRECHSELInfluence of a precipitation heat treatment on the thermal and electrical conductivity of AgSi and AlSi alloys2013
Cornelia BISCHOFInfluence of diamond quality and surface coating on the thermal conductivity in AgSi-diamond composites2014
Alexander SCHMIDSoldering behaviour of graded W/Cu layers for divertor components2013
Carmen REISCHLInvestigations of the thermal conductivity in MMCs2013
Klemens DANZINGERPVD-coated hard material phases in wear protection materials 
Bartlomiej CIECZKAPVD-coated hard material phases in wear protection materials2013
Velibor LAZAREVICInvestigations of hard material phases for wear protection layers by plasma deposition welding2013
Gerald SINGERSurface modification of hard material phases for wear protection layers2012
Denise TAUSSIGSelective dissolution of W-containing scrap using sulfuric acid2012
Marie-Christine HUEMERLow-temperature thermal conductivity of Ag/Si diamond composites2011
Anna BLEIERThermophysical properties of gas pressure infiltrated Al-Si and Ag-Si/carbon fibre composites2011
Christian WEISSENSTEINERLow-temperature thermal conductivity of Al-diamond composites2010
Sarah HURCHThermophysical properties of gas pressure infiltrated silver/carbon fibre composites2010
names, topics and date of all previous bachelor thesis performed in the research group

 

NameTopicYear
Elisabeth BALLOK  
Peter STEINSCHADENNew approach for flexible thermocouples for aerospace applications2024
Johannes GRAFTi alloys with biocompatible mechanical and antibacterial properties2024
Theresa GEYERPM copper MMCs for thermal management applications2024
Nico MOSERDevelopment and characterisation of Ti-MMCs with high specific stiffness2023
Lena DORNERInfluencing the binder properties in tungsten heavy alloys (WHA)2023
Irina WODAK (joint supervision with Raquel de Oro Calderon)Iron-manganese-nickel binder for WC hardmetals2022
Markus LUNZER (joint supervision with Raquel de Oro Calderon)Alternative binders for hardmetals2022
Andreas ZUNGHAMMERDevelopment and characterisation of a Ti alloy with high specific stiffness and low structural anisotropy2022
Katharina RAUCHENWALD (AIT)Sprayed and spray-pyrolysed coatings, based on oxides and silver-nanowires, for flexible substrates2021
Andreas LEHNERPreparation and mechanical properties of nickel-carbon fibre composites2021
Toni BAKOVICPreparation and characterization of solder balls by gas atomizing2021
Stefan CULIC (AIT/LKR)Optimisation of Al-Mg-Si extrusion-alloys for safety applications in the automotive industry2021
Maximilian WOLFCemented Carbides with γ/γ´ Binder Microstructure2020
Christiane GROHER (AIT)Substrate-activation approach for the chemical bath deposition of ZnO compact layers2020
Ufuk YILMAZHigh Entropy Alloys - production and properties2020
Kristina HOFERCharacterisation of ore concentrates and their behaviour during pressure digestion2020
Bernhard KLAMPFLSoldering of optical components to CTE-matched substrates for space applications2020
Tobias BAUERNFEINDProduction of continuous fibre-reinforced carbon fibre metal matrix composites by galvanic matrix deposition2019
Moritz SCHWINGENSCHLÖGLHigh Entropy Alloys as binder phase in WC-composites2019
Marko SCHEFBERGERSpatially resolved investigation of the degradation mechanisms during hammer drilling on reinforcement steel2019
Anna BLEIERComposite materials based on WC-Co-Cu2017
Thomas STADLERTungsten carbide/silver contact materials by gas pressure infiltration2017
Cornelia BISCHOFMelt phase infiltration of porous carbon bodies with copper alloys2016
Thomas STEPANDetermining the interface resistance between metals and inclusions in metal matrix composites2016
Bettina RITTManufacturing and characterising diamond-cemented carbide composites2016
Elias ASCHAUERWetting behaviour of metallic melts on carbon substrates using the sessile drop method2015
Stephanie GREILMechanical properties of coinage alloys2015
Jakob SEGLInfluence of the surface-modification of diamonds on the thermal conductivity in metal-diamond-composites2014
Robert HELLEINThermophysical characterisation of metal-diamond composites2013
Christian WEISSENSTEINERSelective dissolution of W-containing scrap using sulfuric acid2012
Lena PILZPre-sintering behaviour of molybdenum2011
Stephan STEINHAUER (AIT)Synthesis, Characterisation and Gas Sensing Application of Cupric Oxide Nanowires2011
Timothy Alexander KEPPERTProperties and microstructure of Cu-CNT composites by thermal decomposition of metal salts2010
Stefanie HUBERFunctionally graded W/Cu interlayers for active cooled ‘flat-tile’ divertor mock-ups2010
Julia SYNEKProduction of dispersion-strengthened silver as contact material2009
Victoria APOLONERThermo-physical properties of Ag-CNT composite materials2009
Thomas STECKCarbon nanotube-silver matrix composites for use as heat sink material2008
Thomas KONEGGERProduction and characterisation of carbon fibre-silver matrix composites2007
Judith JANUSCHEWSKYSynthesis and characterisation of nanostructures made of tungsten and molybdenum oxides on silicon2007
Robert C. HULASilver coating of tungsten carbide powders for use in electrical contact materials2007
Florian HUBERProduction and characterisation of particle and long-fibre-reinforced molybdenum-copper and tungsten-copper composites2006
Waltraud HIMMLERElectroless copper plating of W powders and their use in the production of W-Cu composites2005
Ulrich KASTNER (joint supervision with W.-D. Schubert)Ammonia dissolution of W/Cu scrap2005
Christopher VEITSCH (joint supervision with W.-D. Schubert)Coating of tungsten carbide powders with cobalt metal2004
Eva WALLNÖFERProduction of copper and silver MMCs with carbon nanofibres2003
Johanna WENZELRecycling of magnesium-containing secondary raw materials2002
Christina MEISSL (joint supervision with W.-D. Schubert)Synthesis of cobalt oxides and hydroxides2001
Christoph EGLSÄERProduction and characterisation of ODS-PtRh10 materials2000
Patrik LEHRNERProduction of pure platinum and PtAu5 ICP-AES standards1998
names, topics and date of all previous master thesis performed in the research group

 

NameTopicYear
Ella STAUFER  
Tobias BAUERNFEINDFabrication of continuous fibre-reinforced carbon-fibre metal-matrix composites from TFP fibre preforms2023
Jakob SEGLInfluence of the Diamond Surface Modification on the Thermophysical Properties of Metal/Diamond Composites2018
Mohammadreza GORJIFabrication of Ni/TiC infiltrated nanocomposite coating2017
Christian WEISSENSTEINERChemical recycling of hard metals (Post-doc)2017
Christian WEISSENSTEINERChemical recycling of hard metals2015
Elise BRUNET (AIT)Fabrication of Tin Oxide Nanowire Gas Sensors2014
Robert C. HULAThermal-Management Materials - New Composites based on Carbon Fibre Reinforced Silver Matrix2010
Thomas JANHSENInvestigations on Metal-Matrix-Composites with Multi-Wall Carbon Nanotubes and Graphite Fibres2007
Christina MEISSL (joint supervision with W.-D. Schubert)Production of micro- and nanocrystalline cobalt oxide and cobalt metal powders2004
Pavol SVECRefining of platinum by vacuum induction melting2000
Patrik LEHRNERPowder metallurgical ICP-AES precious metal standards2000
names, topics and date of all previous PhD thesis and post-doc works performed in the research group

 

NameTopicYear
Edouard FOSSAT-BELAUD (Univ. Bordeaux, F)Characterization of Ti alloys with trace element additives to control grain growth in wire additive manufacturing2024
Orlane REBILLOT-GUILLAUMARD (Univ. Bordeaux, F)Preparation and Characterisation of Superalloys2023
Luc VUILLEMOT (Univ. Bordeaux, F)Metal Matrix Composite Rocket Nozzle2019
Diego NORENA (Univ. Bordeaux, F)Designing electronic circuits for rocket engine testing facility2019
Vincent PASQUIER (Univ. Bordeaux, F)Characterisation of Al/diamond composites2018
Alice AGUIRRE (Univ. Bordeaux, F)Gamma prime strengthened binder in hardmetals2017
Michele-Marie LAPORTE (Univ. Bordeaux, F)Loop heat pipe with porous wick2017
Ivan BOGACHEV (Univ. of Cambridge, GB)Solid state sintering of Ni and stainless steel composites with diamond or SiC2016
Ines DEBAY (Univ. Bordeaux, F)Interpenetrating MMCs2015
Océane VIDAL (Univ. Bordeaux, F)Al- & Ag/diamond MMCs2014
Alexandre FOSSAT (Univ. Bordeaux, F)Wear behaviour of hardfacing materials2013
Guillaume MOUNIC (Univ. Bordeaux, F)MMCs for heat sinks2012
Benoît GRENIER (Univ. Bordeaux, F)Thermo-physical properties of Ag/diamond and Ag/Cf composites2011
Geoffrey ECHIRPEAU (Univ. Bordeaux, F)Thermo-physical properties of Ag/diamond and Ag/Cf composites2011
Benjamin VERNIER (Univ. Bordeaux, F)Low temperature properties of diamond composites2010
Alix LADAM (Univ. Bordeaux, F)Ti-SiC composites2010
names, topics and date of all previous internships and visiting scientists in the research group